3d Printed

SORT:
VIEW: 32/64
22 items found. Showing items 1 to 22 .
  • 1

    …wastewater behind Rinse in fresh water (if desired) Feed Special Note: While all cups are water tested for 12+ hours by the manufacturer, due to the 3D printed design of the cups, we don't recommended allowing them to sit with liquids or raw food in them for more than an hour. Specifications Height:…

    $14.00 Regular Price: $

    Turn any 1" PVC into a random flow generator Vivid Aquatics 3D printed random flow generators easily slips onto PVC for a custom flow pattern through their patent pending randomized design. Each RFG is made of reef-safe PETG plastic and made to outlast your aquarium. Just slip the 1" PVC fitting…

    $24.99 Regular Price: $

    …in the back corner of your tank. Barr Aquatic's Nut Tool is perfect to slip over the bulkhead nut and give you a textured surface to turn. The 3D printed bulkhead nut removal toolswork with most ABS bulkheads that have a 6-sided retaining nut. No longer will you need to strain your hands or use…

    $10.00 Regular Price: $
    Choose Options

    …by opening up the gaps on the side of the cover for less resistance. All of this without affecting pump performance, power draw or noise level. 3D Printed in the U.S.A. Installs in Seconds Easy to Clean Simply remove the stock pump cover and replace using theNeat Aquatics Upgrade Cover. The unique…

    $29.99 Regular Price: $

    …by opening up the gaps on the side of the cover for less resistance. All of this without affecting pump performance, power draw or noise level 3D Printed in the U.S.A. Installs in Seconds Easy to Clean Simply remove the stock pump cover and replace using the Neat Aquatics Upgrade Cover. The unique…

    $29.99 Regular Price: $

    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of small fish and anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads…

    $49.99 Regular Price: $

    …undertow which is less likely to pull animals onto the powerhead, and does this without affecting pump performance, power draw or noise level. 3D Printed in the U.S.A. Installs in Seconds Easy to Clean Simply remove the stock pump cover and replace using theNeat Aquatics Upgrade Cover. The unique…

    $39.99 Regular Price: $

    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads pose a serious…

    $31.99 Regular Price: $

    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads pose a serious…

    $37.99 Regular Price: $

    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of small fish and anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads…

    $62.99 Regular Price: $

    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads pose a serious…

    $44.99 Regular Price: $

    Attaches to 1/2", 3/4" Loc-Line and creates random flow patterns. Vivid Creative Aquatics 3D printed random flow generators easily snap onto standard Loc-Line segments for a custom flow pattern through their patent pending randomized design. Each RFG is made of reef-safe PETG plastic and made to…

    $17.99 Regular Price: $
    Choose Options

    An innovative 3-D printed bracket mount designed for the Kamoer X1 or D-D H2Ocean P1 Dosing Pump. You can attach it to the sump cabinet with 3M tape* or use the built-in screw key holes with 2-Off No.8 Counter Sunk Woodscrews*. *tape and screws not included

    $25.00 Regular Price: $

    Pair of flow directors for IceCap 2k Gyre Pump. 3D Printed from reef-safe PETG plastic Can be placed near surface without creating splashes Direct water flow where you need it most Protect pump rotos from algae growth Reduce pump maintenance needs The NemProtect Flow Directors serve to enhance water…

    $32.00 Regular Price: $

    Pair of flow directors for IceCap 4k Gyre Pump. 3D Printed from reef-safe PETG plastic Can be placed near surface without creating splashes Direct water flow where you need it most Protect pump rotos from algae growth Reduce pump maintenance needs The NemProtect Flow Directors serve to enhance water…

    $38.00 Regular Price: $

    Pair of flow directors for ReefWave 25 Pump. 3D Printed from reef-safe PETG plastic Can be placed near surface without creating splashes Direct water flow where you need it most Protect pump rotos from algae growth Reduce pump maintenance needs The NemProtect Flow Directors serve to enhance water…

    $32.00 Regular Price: $

    Pair of flow directors for ReefWave 45 Pump. 3D Printed from reef-safe PETG plastic Can be placed near surface without creating splashes Direct water flow where you need it most Protect pump rotos from algae growth Reduce pump maintenance needs The NemProtect Flow Directors serve to enhance water…

    $38.00 Regular Price: $

    …Creative Aquatics has combined their 3D printed adapters and patented Random Flow Generator Nozzles with genuine Loc-Line parts to provide you with an easy-to-install upgrade kit for any Red Sea Reefer model 525 XL or below. Genuine LocLine fittings 3D printed parts made from Reef-safe PETG plastic…

    $49.95 Regular Price: $

    …guards for the IceCap 2k Gyre Pump. Wider, gentler intake flow Reduced flow loss Long lasting Low maintenance 3D Printed from reef-safe PETG plastic With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as…

    $50.00 Regular Price: $

    …guards for the IceCap 4k Gyre Pump. Wider, gentler intake flow Reduced flow loss Long lasting Low maintenance 3D Printed from reef-safe PETG plastic With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as…

    $63.00 Regular Price: $

    …into the puck's center hole to expel its inhabitants into your tank to feed your fish. Designed for marine and reef aquariums Easily cultivate live food source for your livestock 5 levels of chambers Roughly the size of a hockey puck (76mm diameter x 27mm thick) 3D printed in reef-safe PETG material

    $25.00 Regular Price: $

    Turn any 1" Threaded Bulkhead into a Random Flow Generator! Vivid Creative Aquatics 3D printed random flow generators easily slips onto PVC for a custom flow pattern through their patent pending randomized design. Each RFG is made of reef-safe PETG plastic and made to outlast your aquarium. Just…

    $29.99 Regular Price: $
  • 1
Sign Up Now