7 Filter Sock Holder

  • PRODUCTS (41)
SORT:
VIEW: 32/64
41 items found. Showing items 1 to 32 .

    …or filter sock replacement.   Dimensions 4" Sock Configuration - 8" L x 6" W x 1.25" H 7" Sock Configuration - 8" L x 9.25" W x 1.25" H   Parts included: 1 Hang-On Mount 1 Adaptor for 10cm (4 inch) filter sock 1 Adaptor for 18cm (7 inch) filter sock 2 plastic screws for leveling.   Filter Socks Sold…

    $24.99

    …sump holders Draw String: attaches directly to plumbing Note: BRS recommends starting with felt socks and switching to mesh if they clog faster than desired.   How fast do you go through filter socks? 50 - 7" x 16" Felt with Plastic Ring 200 Micron Plastic ring fits common sump holders Felt is…

    $349.99

    …your sock tray and direct the water into the Klir filter. It's adjustable and allows you to easily dial the the flow rate to divert excess flow or filter less aggressively.     The Flow Diverting cap will work with a variety of sumps with 7 inch filter sock holes    What's Included? 1x 7" Flow…

    $19.99

    …in any custom sump sock holder. The 300-micron rating allows large visible pieces of detritus and other foreign materials to be collected while water and smaller particles will flow through the sock, which is a great balance between polishing and flow rate.   Filter socks are normally placed…

    Starting at:
    $13.99

    The CPR Sock-It Filter Sock Holder is a simple filter sock holder using a gasket and acrylic holder. Very simple and inexpensive way to add filtration to any of your 1" outlets such as overflows and skimmer outlets. Three models each sold with or without filter sock: 4”- 1 inlet 7”-1 inlet 7”-2…

    Starting at:
    $26.99

    …Center/Refugium Section: 14.5" x 15.5" Return Pump Section: 7" x 15.5" Total Water Volume: 43 gallons Skimmer Water Level: 7" to 9.5" adjustable Drain Input Fittings: two 1.5" plus a blank plate for customization Filter Socks: 3x 4" Socks   The Sapphire series introduces several new features not…

    $589.99

    …This feature is on the SUMP models only.   Locking Filter Sock Holder Filter socks snap and lock into the filter sock holders to secure the filter sock from falling out when it becomes clogged and needs to be cleaned or replaced. The 4” filter socks are 100 micron rating.   Draw String Tabs Tabs are…

    $259.99

    7” to 10” This feature is to accommodate for the water height requirements for different protein skimmers.   Probe Holder All RUBY sumps come with a probe holder that can hold up to three probes. The holes are 0.63” in diameter.   Locking Filter Sock Holder Filter socks snap and lock into the filter

    $369.99

    …brace Quiet water flow operation design Interchangeable floss filter box and filter sock holder (filter sock included) Removable heater holder, test probe holder and dosing holes included Removable auto-top-off float valve holder Water level adjustable (5”-12”) in protein skimmer, refugium and…

    $229.99

    …you may not want it. With the Skimz Extended Life filter socks, they will last much longer than most other standard mesh filter socks. 7" Plastic Ring Fits most 7" sump holders Fits on Skimz Filter Bag Holder Dimensions: 7" x 16" (178mm x 406mm)   What's Included? 1x Skimz ELS-L307 Filter Sock

    $11.24

    The CPR Sock-It Filter Sock Holder is a simple filter sock holder using a gasket and acrylic holder. Very simple and inexpensive way to add filtration to any of your 1" outlets such as overflows and skimmer outlets. Three models each sold with or without filter sock: 4”- 1 inlet 7”-1 inlet 7”-2…

    Starting at:
    $30.99

    socks are not readily available but yet mechanical filtration is needed. In this case, simply remove the filter sock plate and install the perforated foam block plate and then place the included foam sponge block filter in place.   Adjustable Water Level Water level in the sump is adjustable from 7”

    $539.99

    …integrated probe holders, filter socks, tube holders and an adjustable skimmer chamber. With a super clear front acrylic window allowing you see your equipment without any distortion and all other sides are white to keep things bright and super sharp looking.   DuoFlo Sock Chamber With the…

    $482.99

    socks are not readily available but yet mechanical filtration is needed. In this case, simply remove the filter sock plate and install the perforated foam block plate and then place the included foam sponge block filter in place.   Adjustable Water Level Water level in the sump is adjustable from 7”

    $439.99

    7” to 10” This feature is to accommodate for the water height requirements for different protein skimmers.   Probe Holder All RUBY sumps come with a probe holder that can hold up to three probes. The holes are 0.63” in diameter.   Locking Filter Sock Holder Filter socks snap and lock into the filter

    $354.99

    7” to 10” This feature is to accommodate for the water height requirements for different protein skimmers.   Probe Holder All RUBY sumps come with a probe holder that can hold up to three probes. The holes are 0.63” in diameter.   Locking Filter Sock Holder Filter socks snap and lock into the filter

    $334.99

    …This feature is on the SUMP models only.   Locking Filter Sock Holder Filter socks snap and lock into the filter sock holders to secure the filter sock from falling out when it becomes clogged and needs to be cleaned or replaced. The 4” filter socks are 100 micron rating.   Draw String Tabs Tabs are…

    $329.99

    …This feature is on the SUMP models only.   Locking Filter Sock Holder Filter socks snap and lock into the filter sock holders to secure the filter sock from falling out when it becomes clogged and needs to be cleaned or replaced. The 4” filter socks are 100 micron rating.   Draw String Tabs Tabs are…

    $274.99

    socks are not readily available but yet mechanical filtration is needed. In this case, simply remove the filter sock plate and install the perforated foam block plate and then place the included foam sponge block filter in place.   Adjustable Water Level Water level in the sump is adjustable from 7”

    $334.99

    socks are not readily available but yet mechanical filtration is needed. In this case, simply remove the filter sock plate and install the perforated foam block plate and then place the included foam sponge block filter in place.   Adjustable Water Level Water level in the sump is adjustable from 7”

    $399.99

    …integrated probe holders, filter socks, tube holders and an adjustable skimmer chamber. With a super clear front acrylic window allowing you see your equipment without any distortion and all other sides are white to keep things bright and super sharp looking.   DuoFlo Sock Chamber With the…

    $258.74

    …integrated probe holders, filter socks, tube holders and an adjustable skimmer chamber. With a super clear front acrylic window allowing you see your equipment without any distortion and all other sides are white to keep things bright and super sharp looking.   DuoFlo Sock Chamber With the…

    $274.84

    …Bulkhead: 1" Slip x Slip Return Bulkhead: 1" Slip x Slip Filter Sock Holder: 4" Diameter Lid/Splash Guard(s): 4.5" x 4.5" (return) and 4" x 12.5" (drain) Adjustable Water Level: 6" - 10" Reversible Weir (Flat or Toothed) Probe Holders: 4 (3x 1/2" diameter and 1x 3/4" diameter) Cable Grommet: 1.4"…

    $824.99

    …flow through the media and contact time. Mesh Media Bags can also be used as effective filter socks 200 Micron Mesh Media Bag   Mesh Media Bags can be used for a variety of applications, from holding loose filter media to trapping detritus and free floating particles. In most applications, a reactor…

    Starting at:
    $5.99

    …a protein skimmer or additional filtration equipment.   The intake or drain chamber accepts standard 4" filter socks but is also specifically formatted to work with the Klir Fleece Filter Roller for maximum mechanical filtration and pristine water clarity. A 1" slip bulkhead located on the return…

    $499.99

    …Slip x Slip Return Bulkhead: 1" Slip x Slip (dual) Filter Sock Holder: 4" Diameter Lid/Splash Guard(s): 8.9" x 4.5" (return) and 5.75" x 10" (drain) Adjustable Water Level: 6" - 10" Reversible Weir (Flat or Toothed) Probe Holders: 4 (3x 1/2" diameter and 1x 3/4" diameter) Cable Grommet: 2"…

    $899.99

    …- 8" - 11.5" Skimmer Section - 8" x 12.5" Skimmer Section Water Level - 7" - 9.5" Return Section - 5" x 12.5" Drains - Three 1" PVC Couplers (two main drains, one configurable) Filter Sock Holders - Two 4" Diameter Holders   What's Included? 1x Trigger Triton26 Sump 4x Push-Connect Fittings with…

    $359.99

    …Level - 8" - 11.5" Skimmer Section - 10" x 11" Skimmer Section Water Level - 7" - 9.5" Return Section - 6" x 10" Drains - Three 1" PVC Couplers (two main drains, one configurable) Filter Sock Holders - Two 4" Diameter Holders   What's Included? 1x Trigger Triton20 Sump 5x Push-Connect Fittings with…

    $414.99

    …assemble and seal all the plumbing.   Filtration The sump includes a filter sock holder and sock to keep large pieces of debris and detritus from clogging pumps and other pieces of equipment. The water can then flow from the filter sock into the skimmer compartment where the water will keep a steady…

    Starting at:
    $995.00

    …assemble and seal all the plumbing.   Filtration The sump includes a filter sock holder and sock to keep large pieces of debris and detritus from clogging pumps and other pieces of equipment. The water can then flow from the filter sock into the skimmer compartment where the water will keep a steady…

    Starting at:
    $1,099.00

    …assemble and seal all the plumbing.   Filtration The sump includes a filter sock holder and sock to keep large pieces of debris and detritus from clogging pumps and other pieces of equipment. The water can then flow from the filter sock into the skimmer compartment where the water will keep a steady…

    Starting at:
    $1,499.00

    …assemble and seal all the plumbing.   Filtration The sump includes a filter sock holder and sock to keep large pieces of debris and detritus from clogging pumps and other pieces of equipment. The water can then flow from the filter sock into the skimmer compartment where the water will keep a steady…

    Starting at:
    $1,849.00