Booster Pump Filter

VIEW: 32/64
7 items found. Showing items 1 to 7 .
  • 1

    …up a booster pump system we will install a DMFit strainer before it to keep the pump running quiet and lasting a long time.  A sediment filter before a booster pump will help your expensive pump last a lifetime.  The DMFit filter strainer will only remove larger particles that can damage the booster

    Starting at:

    …self-contained filter cartridges with easy to use push connect fittings. They are most commonly used for the following: Great for low volume applications. Replacement filters for BRS 3 Stage Space Saver RO System (legacy model) Sediment filter is sometimes used as a prefilter on RO booster pump


    …system “TDS” rejection rate and extending membrane sediment and carbon filter life.   Upon system start-up and every hour thereafter, the 24VAC normally closed solenoid valve automatically “power flushes” the membrane at full pump flow, or full line pressure in unboosted systems, for 18 seconds…

    Starting at:

    …membrane in order to function properly and be efficient. If your home's water pressure is less then the recommended PSI do not worry, adding a booster pump is simple and only takes a couple of minutes.   Compatible with: 150 GPD Water Saver Upgrade - All BRS 75 GPD RO/DI Systems 200 GPD Water Saver…

    Starting at:

    …consumption of DI resin. Get maximum output and the best quality filtered water from your RO system!   The Smart Buddie is designed to work with most RO and RO/DI units rated between 50 and 100 gallons per day. The Smart Buddie booster pump is quiet, easy to install, and can significantly increase…


    …increased by adding a booster pump before your RO/DI system. Low pressure may cause the RODI system to produce excessive waste water. Pressure over 90 PSI may cause damage to the RO/DI units filters and components.   Need Replacement Filters? 4 Stage RO/DI Replacement Filter Kit    BRS 4 Stage RO/DI…

    Starting at:

    …6" x 5.5" x 14" 6" x 5.5" x 14" Recommended Minimum Water Pressure  50-80 psi 50-80 psi 65-80 psi 65-80 psi Tubing Size 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing Water pressure can be increased by adding a booster pump before your RO/DI system. Low pressure may cause the RODI sys

    Starting at:
  • 1