Booster Pump Install

SORT:
VIEW: 32/64
12 items found. Showing items 1 to 12 .
  • 1

    …and reduces noise Adjustable pump pressure Adjustable shut-off pressure point   Note: Aquatec 8800 Booster Pumps do require a minimum of 20 PSI to operate. Not having proper pressure feeding the booster pump will cause poor performance, and void the warranty.   Booster Pump Installation Instructions

    $149.99

    …  The Smart Buddie is designed to work with most RO and RO/DI units rated between 50 and 100 gallons per day. The Smart Buddie booster pump is quiet, easy to install, and can significantly increase water output. Not only does the Smart Buddie increase pressure, but it has an integrated auto-flush…

    $129.99

    …or 200 GPD Water Saver systems. Kit includes an 800ml/min Auto Flush Flow Restrictor. Requires working Auto Shut Off Valve to operate.   Installation Instructions: 1. Turn off your source water supply.  2. Locate and replace the current flow restrictor with the new Auto Flush Flow Restrictor.…

    Starting at:
    $104.99

    …plate significantly dampens vibrations and reduces noise Adjustable pressure   Note: Aquatec 8800 Booster Pumps do require a minimum of 20 PSI to operate. Not having proper pressure feeding the booster pump will cause poor performance, and void the warranty.   Booster Pump Installation Instructions

    $99.99

    …plate significantly dampens vibrations and reduces noise Adjustable pressure   Note: Aquatec 8800 Booster Pumps do require a minimum of 20 PSI to operate. Not having proper pressure feeding the booster pump will cause poor performance, and void the warranty.   Booster Pump Installation Instructions

    $109.99

    …applications. Replacement filters for BRS 3 Stage Space Saver RO System (legacy model) Sediment filter is sometimes used as a prefilter on RO booster pump installations   Omnipure Inline Sediment Filter Specs: Micron Rating - 5 micron Flow Rate - 0.5 GPM Max Temperature - 100° F Max Pressure - 125…

    $16.99

    …up a booster pump system we will install a DMFit strainer before it to keep the pump running quiet and lasting a long time.  A sediment filter before a booster pump will help your expensive pump last a lifetime.  The DMFit filter strainer will only remove larger particles that can damage the booster

    Starting at:
    $8.99

    …membrane in order to function properly and be efficient. If your home's water pressure is less then the recommended PSI do not worry, adding a booster pump is simple and only takes a couple of minutes.   Compatible with: 150 GPD Water Saver Upgrade - All BRS 75 GPD RO/DI Systems 200 GPD Water Saver…

    Starting at:
    $59.99

    …spikes increasing service life. This glycerin filled pressure gauge comes assembled with 1/4" quick connect fittings for quick easy installation in-line before the RO Membrane. This item is designed for use with our saltwater aquarium line of RO systems.   Pressure Gauge Installation Instructions

    $20.49

    …ratio Increase in the TDS rejection rate Extended membrane life 1/4" hose push connections Hermetically protected electronics for long life   Installation Note: Aquatec 8800 Pressure Switch & Aquatec 8800 Power Supply required for installtion.   An Auto-Flush Flow Restrictor will assist the RO…

    Starting at:
    $54.99

    …6" x 5.5" x 14" 6" x 5.5" x 14" Recommended Minimum Water Pressure  50-80 psi 50-80 psi 65-80 psi 65-80 psi Tubing Size 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing Water pressure can be increased by adding a booster pump before your RO/DI system. Low pressure may cause the RODI sys

    Starting at:
    $199.99

    …psi 65-80 psi 65-80 psi Tubing Size 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing Water pressure can be increased by adding a booster pump before your RO/DI system. Low pressure may cause the RODI system to produce excessive waste water. Pressure over 90 PSI may cause damage to the…

    Starting at:
    $149.99
  • 1