Cable

SORT:
VIEW: 32/64
263 items found. Showing items 1 to 32 .

    …the winter months? These knitted beanies are perfect for the cold winter months. Mr. Chili is embroidered on the front and the thick cable knitting makes them soft and flexible. Pick one up just for yourself or one for every member of the family!   What's Included? 1x Mr. Chili Cable Knit Beanie

    $19.99

    Use the 2 point cable suspension hanging kit for securely hanging the ATI Powermodule and SunPower T5 lighting fixtures above your aquarium. The sleek, griplock style 2 point connection allows for simple horizontal balance adjustment.

    Starting at:
    $37.99

    The DC24 to Bare Wire Accessory Cable has two bare ends that have been tinned and ready for the accessory of your choice. The other end of the cable will connect to the 24v DC port on the EnergyBar 832 or the 1Link module. The port can be switched on and off just like any other outlet.   You can use…

    $17.95

    …Module cable lets you connect two VarioS pump controllers or Gyre Interface Modules directly to a 0-10v controller like the Neptune Apex Controller.   Connect your VarioS or Gyre pumps directly to any controller with a 0-10v port that uses a standard ethernet jack to connect. The Y Modules Cable

    $11.99

    …the Apex System or the Advanced LED Dimming Module – VDM. This cable has a RJ45 plug on one end and bare wires on the other that must be connected in the manner recommended by your LED manufacturer. If you have four colors of LED that you want to dim, then you will need to buy two of these cables.

    $14.95

    Extend the length of your Gyre XF150, XF250, or XF280 pumps with the extension cables from Maxspect. These will let you increase the distance from the controller to the pump.   The Maxspect Gyre Extension Cable allows you to increase the distance from your Maxspect Gyre powerhead to the Gyre…

    $18.00

    Connect your Apex Controller from Neptune to up to two Tunze Stream pumps. It has 1 RJ45 connector which plugs into the Apex base unit and 2 Din5 connectors which plug into 2 Tunze Controllable Stream pumps.

    $19.95

    …connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex, Modules, and Energy Bars together. Please Note: AquaBus Cables are USB-type cables but Apex Systems does not have a USB interface. DO NOT plug into any computer or other USB…

    Starting at:
    $9.95

    …Controller (requires 1Link port) Don't have a 1Link port on your Apex System? Check out the Neptune 1Link Module Need a longer 1Link Cable? Check out the 1Link Extension Cable   Specifications: Pump Dimensions - 3.875" W x 4.875" H x 6.250" D Driver Dimensions - 3" W x 4" H x 1" D Max Flow - 1500…

    $299.95

    …connectors for flexible expansion via AquaBus Comes with 3 Ft. AquaBus cable Fully upgradeable via future firmware upgrades LED Status indicator Compatible with all Apex Systems NOTE: The VDM does not include any interface cables for your pumps. You must purchase those separately   Apex Ready…

    $99.95

    …may need to be dosed in metered amounts. You simply just hook the DOS Fluid Metering system to your Apex controller with the included AquaHub cable and with the Fusion cloud software programming a dosing pump has never been so simple. The DOS system when interfaced through fusion can be programmed…

    $299.95

    …place until you depress the fitting, allowing you to slide the light up and down the main suspension cable. 2 point suspension Adjustable height Utilizes tank mounting holes 5.5 feet long main cables   What's Included? 2x 65" suspension wires 2x 18" suspension wires 4x Shieldo suspension pegs 2x…

    $29.99

    Use the Kessil A360/A160 Neptune Apex Control Cable to connect your Kessil 360 (A360N/360W) or A160 LED lights to your Neptune Systems Apex controller. Type 1 - compatible with Neptune Systems Apex controllers Length: 6 Ft. (1800mm) without connectors Color: Black One End: 1/8" (3.5mm) stereo male…

    $20.00

    This 6.5ft cable allows you to run your Maxspect Gyre in both forward and reverse direction by using one full Variable Speed port on your Apex to connect two 0-10v signals to a single IceCap Gyre Interface Module. When using the Neptune Apex with the Gyre Interface module it allows complete control…

    $11.99

    Use the Kessil A360 ReefKeeper Control Cable to connect your Kessil 360 (A360N/360W) LED lights to your Digital Aquatics ReefKeeper controller. Type 2 - compatible with Digital Aquatics controllers Length: 6 Ft. (1800mm) without connectors Color: Black One End: 1/8" (3.5mm) stereo male phono plug…

    $19.99

    Use the Kessil A360 Control Extension Cable to either extend the connection between two Kessil 360 (A360N/360W) LED lights or one Kessil 360 (A360N/360W) LED light and a controller. Length: 6 Ft. (1800mm) without connectors Color: Black One End: 1/8" (3.5mm) stereo male phono plug Other End: 1/8"…

    $20.00

    …mL KH Director Reagent 1x 4.0 pH Calibration Solution 1x 7.0 pH Calibration Solution 8x Dosing Connectors 1x GHL PAB Cable 1x Power Splitter Cable 1x 24V Power Supply 6ft USB Cable 5m Silicone Tubing 70cm Flex PVC Reagent Tubing   *The KH Director is designed to work in conjunction with a GHL Doser…

    $849.90

    …Power Consumption - 35 watts @ 24VDC Controller to Pump Cable - 10ft Controller to Power Supply - 5ft Recommended for 25 up to 100+ gallon aquariums.   What's Included? 1x XF330 Pump 1x Gyre 300 Series Controller 1x Power Supply with Cable 1x Spare Bushings 1x Flow Directors & Protective Mesh Covers

    $299.99

    …immersion depth: 6.5 ft Pump cable length: 9.75 ft Inlet Size: 50mm / 2 in Outlet Size: 40mm / 1.5 in Internal or External application Dimensions: 6.82" L x 5.95" W x 6.56" H Whats Included Abyzz A200 pump 110V 60Hz driver Power cable: 5 ft Driver/Controller connecting cable: 6.5 ft Operating manual…

    $1,899.99

    …adjust the height of the fixture. If you have tall ceilings the Giesemann Wall Brackets make a great solution, allowing you to use the Stellar Hanging Kit without having to have a long wire span up to your ceiling.    Cable Length - 60"   What's Included? 1x Giesemann Stellar Hybrid Hanging Kit

    $39.99

    …for Giesemann Razor T5 Retrofit Fixtures. This kit mounts to a single point on each end of the Razor T5 fixture allowing you to suspend it from your ceiling or any type of wall brackets (we prefer Giesemann Wall Brackets).    What's Included? 2x 58" Cables 2x Insert Nuts 2x Pinch Locks 2x Cable Caps

    $39.99

    …Mounting brackets then this is the hanging kit for you.  Reef Brite's LED brackets are made to be suspended from your ceiling or wall brackets. The hanging kit will be able to hold 1 set of the 3-hole or 5-hole LED Mounting Brackets.   8 Feet Long Vertical Cables   What's Included 1x LED Hanging Kit

    $33.03

    Suspend your Aquatic Life T5 Hybrid Lights from your ceiling or wall brackets! These are the exact same wire hanging kit that is included with all of the Aquatic Life Hybrid T5 Lights. If you need another set, lost your current set, or simply just want a back up on hand, the 36" long light hanging…

    $30.00

    …with the color spectrums emitted.    Specifications: Dimensions - 4.7" L x 1.2" W x 2.2" H Compatible with: Windows based computers using operating systems up to Windows 10. internet access requried   What's Included? 1x 7097 Multicontroller 1x USB Cable 4x Tunze Connection Cables   Owners Manual  

    $179.99

    …Mounting Distance From Wall - 1” - 3.75” from the wall   What’s Included 2x Cantilever Wall Brackets 2x Suspension Cables With Threaded Ends 2x Fixture to bracket connectors 2x Wire cable screw clamps 4x Wire cable management slides 1x Level 6x Mounting screws    Floating Suspension Kit Manual

    $124.99

    If you have 3 Tunze pumps that are controlled by the 7090.050 controller this cable will allow you to hook up all three pumps to be controlled by a single 7090 controller with the addition of the 7092.300 connecting cable.

    $19.29

    …Sensor Diameter - 0.78" Magnet Thickness - 0.25"  Max Tank Thickness - 0.5" Controller Dimensions - 3.75" H x 0.6" W x 2.25" L Sensor Cable Length - 10 feet Pump Cable Length - 6 feet   What's Included? 1x Smart AWC Touch Controller 3x DC Pumps 3x Siphon Breaks 6M Water Tubing 3x Tube Holders 1x…

    $209.99

    …Pump too (booster cable required).    Product Features Backup power for 30 or more hours on a VorTech Pump. Can connect to another Battery Backup for two times the run time. Comes with trickle charger so you’re always prepared. Complete package comes with all the wiring cables needed. Specifications…

    $173.25

    …DC24 Extension Cable lets you increase the distance between your EB832 or 1Link module and the accessory being used. A perfect example is if you use the Neptune PMUP accessory pump as an ATO solution, and the reservoir is 15 feet away, you will need a few extra feet of cable to span the distance,…

    $17.95

    The Tunze Controller Pump Cable can be used as a replacement cable for the 7092 Controller, and also for networking two Tunze 7090 controllers together in a master/slave configuration.   Features: Cable Length - 4 feet Connector - 5 pin

    $10.99

    Replacement wall outlet to power supply cable for Maxspect Gyre power supplies or even other DC power supplies. This cable couples your 120V wall outlet to the DC power supply for the Gyre pumps.   What's Included? 1x Maxspect Gyre Power Supply Cable

    $14.99

    …1Link Extension Cable lets you increase the distance between you WAV pumps, COR pump, or any other 1Link accessory. The cable has Male and Female ends directly connected to the cable allowing it to last for a lifetime. 10 foot extension Male - Female   What's Included? 1x 1Link Extension Cable

    $19.95