Canister

…Reverse Osmosis Canister with 1” NPT Ports 20“ Reverse Osmosis Canister with ¾" NPT Ports 20“ Big Blue (Clear) Reverse Osmosis Canister with 1” NPT Ports   Note: Fittings are not included. Canisters with pressure relief ports may have a red or green button and may very from canister to canister.   

The Add-On Canister Upgrade Kit is great for anyone that wants to add more filtration to their RODI system. If you simply want to add another carbon block, sediment filter, or DI resin, you can increase your filtration capacity very quickly. Depending on the specific issue you wish to solve, it can…

…the resin. At this point the resin should be tightly packed flush to the rim. Put the foam ring back inside the screw cap and screw the cap on. Place the newly filled cartridge into the RO canister and make sure the arrow on the side of the cartridge points up.   DI Cartridge Refill Instructions

Single deionization add on canister kit complete with Dual TDS Meter and pre-packed color changing DI cartridges! Dimensions - 14" x 6" x 5.5" Dual TDS Meter already installed Perfect for adding additional DI stages to your RO system Cartridges come with canisters full of Color Changing DI Resin…

…using included push connect fittings. (2) 3 Ft. sections of tubing Holds three cups of carbon (Aprox. 300g) or two cups of GFO (Aprox 290g) per canister Not for use with Biopellet Media Dimensions: 14.5"H x 14"W x 5.25" Sicce Syncra 1.5 Dimensions - 4" H x 2.4" W x 3.1" H Pump (optional) and media…

…RO Canister Screw - #10-12 x 3/4" - Standard screws are used for attaching the canisters to a metal bracket. 10” Long RO Canister Screw  - #10-12 x 1" - The long screw is required for the few holes where additional brackets or clips (ex. membrane housing clips) are installed. 20” RO Canister Screw -…

Why does BRS recommend this? Push connect fittings need the tubing to go in straight or a leak may be possible.  Tube clips keep the collet on the fitting locked out to hold the tube into the fitting to help prevent leaks.  Anytime you have a tight bend going into a fitting we highly recommend tube…

Why does BRS recommend this? The Deluxe reactor has a slimmer form as the bracket is molded directly into the canister head, as well as integrated push connect fittings to keep things as compact as possible.  Along with the standard easy to use push connect tubing, flow control, and a refillable…

…water line from the RO system to a sink's drain pipe Mur-lok Push Connect Inline Ball Valve for easy on/off Filter Wrench to tighten and loosen canisters Mur-lok Garden Hose/Utility Sink Adapter to make a non-permanent connection to garden hose or laundry tub Mur-lok EZ angle stop adapter to make a…

…Waste to Product Water Ratio 3:1 3:1 1.5:1 1.5:1 Rejection Rate 99% 98% 99% 98% Flow Restrictor 550 ml/min 800 ml/min 550 ml/min 800 ml/min Auto Shut Off Valve ✓ ✓ ✓ ✓ Canister Wrench ✓ ✓ ✓ ✓   Laundry Tub Connection Adapter ✓ ✓ ✓ ✓ Chrome Faucet Diverter Valve ✓ ✓ ✓ ✓ HM Digital DM-1 TDS Mete

Dual DI Canister ¼" Ports . Perfect for adding additional stages to your current system. Comes with 5 feet of tube.

…in this "bath" for 24-hours at room temperature. Remove Xport-NO3 from pail and pour water into the aquarium system, then place Xport-NO3 into canister filter, media reactor, or 800µm mesh filter bag; a flow-through rate of 1 - 3x the total aquarium volume per hour is recommended. Do not fluidize.…

Single Stage deionization canister. Perfect for adding a DI stage to your RO system or adding an additional stage to your current system. Comes with the Canister, Cartridge full of DI resin and 5 feet of 1/4" tube.

…all canisters that use 2.5" x 10" filters.   Wrench for 20" x 2.5" Canisters - The 20" Wrench fits a majority of canisters that use 2.5" x 20" reverse osmosis filters.   Wrench for 10" x 4.25" and 20" x 4.25" (Big Blue) Canisters - If you have a jumbo reactor almost any "Big Blue" canister this…

Keep your RO tubing secure with Tube Mounting Clips! Hold up to two tubes with each mounting clip and secure them to a wall, stud, or any other rigid location. Keeping the plumbing for your RO system clean and tidy looks good, but also makes maintenance much easier and diagnosing issues quicker. The…

…kit is designed to add two additional canisters to your 4 Stage RO/DI system to upgrade to a 6 Stage Deluxe RO/DI system. One canister should be installed before your system and used to house a sediment filter which allows you to use the two pre-filter canisters on your RO/DI system to house dual…

…for water supplies that are treated with chlorine or low-contaminant well water and can be easily upgraded to a 5-Stage system with an add on RO canister upgrade kit if you have harder to remove contaminants.   Tropic Marin Pro Reef Aquarium Salt - 80 Gallon Mix Using a quality salt is an easy way…

O-Ring for the 10“ Reverse Osmosis Canister.  This o-ring may or may not fit in all 10" canisters due to manufacturing differences.

…effective if it dries out therefore, replace the lid if not using all of the container. Place the product between two layers of filter wool in a canister filter. Do not sprinkle into the your reef tank. Do not place it into water without surrounding it with filter wool RowaPhos recommends that you…

…be placed almost anywhere   How to use: Rinse the gems with saltwater or RODI water to remove any dust or loose particles. Place the gems in a canister filter, HOB filter, or any other high flow place throughout your tank. It is suggested to have them placed after mechanical filtration to keep…

…rotating water deflector to be used with most aquarium filter and water pump applications. For freshwater or marine aquariums. Ideal for use with canister filters and powerheads. For use with devices with flow rates of 80-310 gph. Excessive flow rates can damage the unit and are not covered by…

…dye is added to the particles as a color indicator to show when the media is nearing exhaustion, making maintenance as easy as looking at the canister containing the media periodically. The irregular shaped granules add to the available surface area, allowing more air to media contact time, while…

Z style triple bracket for standard 10" x 2.5" RO canisters. If you are building your own RODI or other types of water filtration systems, our Z-Brackets will give any system the professional touch. Each canister can be mounted in a north-south or east-west orientation, and with a little wiggle room…

Membrane housing clips are used to attach the membrane to the RO bracket as well as to attach additional membranes or filters to the original membrane. 2.5" is the standard membrane size. Typically use 2" clips to attach smaller inline carbon filters. 2.5" Membrane Housing Clip 2.5" x 2 Membrane…

These standard RO membrane housings are long-lasting and offer wide membrane compatibility. Membrane housings are relatively standard across the industry, and these housings will fit standard 10" RO membranes, such as the popular Dow Filmtec 75 GPD membranes. Made with high-quality components and…

…Ratio 3:1 3:1 1.5:1 1.5:1 Rejection Rate 99% 98% 99% 98% Auto Shut Off Valve ✓ ✓ ✓ ✓ Flow Restrictor 550 ml/min 800 ml/min 550 ml/min 800 ml/min Canister Wrench ✓ ✓ ✓ ✓   Laundry Tub Connection Adapter ✓ ✓ ✓ ✓ Chrome Faucet Diverter Valve ✓ ✓ ✓ ✓ RO/DI Body Dimensions 16" x 6.25" x 15.5" 16" x 7" x…

…providing greater chloramines performance capacities than granular carbon. It also significantly reduces the carbon fines found in many granular canisters. It is ideal for higher flow rate and capacity applications. The CRFC20-BB cartridge is capable of removing chloramines from 10,000 gallons of…

…are super strong and include pre-drilled wall mounting holes (screws not included).  Works with 2.5" x 10" RO Canisters Compatible With Many Different Brands Pre-Drilled for a Pressure Gauge Durable White Finish Strong & Sturdy   What's Included? 1x Triple RODI Bracket for 10" Canisters (U-Style)

…agents, solvents, antistatic agents, or binders.  Unique Dual-Grade Density Higher Dirt Holding Capacity For Big Blue and Large Diameter Canisters FDA Compliant Construction Compatible with High Flow Rates Minimizes Pressure Drops   Choose From: 1 Micron - Ideal for ultra-fine water polishing.…

…Leak Detector Pad when water is detected it will expand and trip the Flow-Lok Safety lever to stop the flow of water.  The Flow-Lok Drip Tray mounts directly to the canisters of your RODI system so any leaks go directly into the tray where the Flow-Lok switch can be mounted for an instant shut off.

Dow 111 O-ring lubricant is used to prevent the O-rings in RO canisters from binding up when tightened and provides a tight seal.

…Restrictor 550 ml/min 800 ml/min 550 ml/min 800 ml/min Canister Wrench ✓ ✓ ✓ ✓   Laundry Tub Connection Adapter ✓ ✓ ✓ ✓ Chrome Faucet Diverter Valve ✓ ✓ ✓ ✓ RO Body Dimensions 16" x 6.25" x 15.5" 16" x 7" x 15.5" 16" x 7" x 18" 16" x 7" x 18" DI Canister Dimensions 6" x 5.5" x 14" 6" x 5.5" x 14" 6"…