Clamp

SORT:
VIEW: 32/64
69 items found. Showing items 1 to 32 .

    …Vinyl Tubing 1 1/4" Braided Vinyl Tubing 1.5" Braided Vinyl Tubing 2" Braided Vinyl Tubing   Ratchet Clamps Interior Dimension (on smallest setting) 1/2" Ratchet Clamp 0.72" 3/4" Ratchet Clamp 1.03" 1" Ratchet Clamp 1.23" 1 1/4" Ratchet Clamp 1.62" 1 1/2" Ratchet Clamp 1.96" 2" Ratchet Clamp 2.68"

    Starting at:
    $1.19

    Secure your PVC pipe to any solid surface with the Surface Mounting Clamp. Simple clipping mechanism to hold pipe. Available in eight sizes for 1/2" to 4" pipe. Grey

    Starting at:
    $3.99

    …power center looking clean while providing an extra level of safety by allowing you to make and keep drip loops in place. The two-piece design clamps the power supply from the top and bottom, and Velcro straps hold it directly to the brackets. Each bracket can be spaced for your exact power supply's…

    $17.00

    …inside of the tube and restricting flow over time, not to mention is just looks better too. Thick Wall Completely Black No Algae Growth Use Barb Fittings 100% Reef Safe   When selecting the tubing, if you have a 1" barbed fitting you will want to use 1" ID Vinyl Tubing along with a 1" Ratchet Clamp.

    Starting at:
    $1.69

    …V 3.5 Pump / F≤3500LPH: Return Pump Eheim C1000 pump: Drain Pump for skimmer compartment 4” Filter Sock Rigid PE under-mat Stainless Steel Hose Clamps* Silicone Hose for 25mm and 40mm Pipe coupling* Additional Red PVC Pipes for assembly to System – ~6.5’ per size* Additional Elbows, Tees, Unions,…

    $2,349.99 $1,409.99

    …your UV Sterilizer with Niche3D's UV Clamps!   Mounting UV Sterilizers can be difficult and in most cases, people will just prop them up in the corner which is not good for the sterilizer or your aquarium. Using a UV-Sterilizer Mounting Clamp lets you clamp the sterilizer's body in place while…

    $59.99

    …  Installation is super easy, just remove the stock return nozzle and replace it with the slip adapter and you are done! Just add your favorite Loc-Line nozzle or Vivid Creative's RFG Nozzle. No glue, tape, heat, or clamps are needed!   Compatible with: Red Sea Reefer Aquariums Red Sea Max Series

    Starting at:
    $7.49

    …here, and by following the included step by step directions, we had them put together in just a few minutes. The aluminum channel uses a special clamping system that securely holds them against each other, creating a secure and reliable bond.   Cabinet Stand Every IM APS Cabinet Stand comes with…

    $399.99

    …here, and by following the included step by step directions, we had them put together in just a few minutes. The aluminum channel uses a special clamping system that securely holds them against each other, creating a secure and reliable bond.   Aquarium Specifications: Total Volume: 30 Gallons Tank…

    $799.99

    Loc-Line flexible modular plumbing offers endless plumbing configurations and is useful for unique plumbing designs. Loc-Line is commonly used on return lines and closed loops where it is important to direct the water flow in a particular direction.

    $2.29

    …(10 - 20mm)   *Height is measured to the bottom of the Atlantik fixture **Reach is measured to the center of the Atlantik fixture    What's Included? 2x Aluminum Vertical Brackets 2x Aluminum Light Support Brackets 2x Aluminum Tank Clamps 2x Plastic Tank Protector Sheets Mounting Screws & Hardware

    $125.00 $90.00

    Clamps to tanks with rims measuring under 3/4" thick. With a simple screw adjustment your top off tubing will be super secure for years to come.

    $12.99

    …safety control - heater shuts off when not submerged UL Certified Heater ON/OFF control lamp to indicate a heating function 5 1/2 Ft. cable Includes clamp with 2 suction cups Made in Germany   Quick Compare - Eheim Jager TruTemp Aquarium Heaters Model No.Maximum Aquarium SizePower ConsumptionLength…

    Starting at:
    $24.68

    CPR's Aquarium Inflow Kit contains everything you need other than a pump to return water to your tank. Kit includes: 9" x 3/4" J-Tube 4 feet of 3/4" ID Tubing 2 plastic hose clamps

    $18.99

    …in sink drain pipe close to the sink Stick included gasket around hole (remove die cut circle from center if needed Position clamp on pipe and fasten with included screws Push in tubing and check for leaks 1/4" hole needed for 1/4" drain saddle clamp 3/8" hole needed for 3/8" drain saddle clamp  

    Starting at:
    $4.99

    CPR's Aquarium Inflow Kit contains everything you need other than a pump to return water to your tank. Kit includes: 3/4" Return Jet 4 feet of 3/4" ID Tubing 1 plastic hose clamp

    $19.99

    The Kessil Mounting Arm is a rigid arm that allows your Kessil light to be suspended over your tank by clamping onto the aquariums rim. The mounting arm has an adjustment for height, as well as distance making it a perfect mounting solution for any Kessil light. With its integrated cord channel,…

    $65.00

    …into flexible tubing Hang rigid tube on edge of aquarium and place other end into the bucket Close the rolling clamp and squeeze gently to create a siphon Slowly roll open the clamp to your desired drip rate Innovative Marine recommends that the water volume is tripled to slowly equalize all water…

    $9.99

    …Mounting Distance From Wall - 1” - 3.75” from the wall   What’s Included 2x Cantilever Wall Brackets 2x Suspension Cables With Threaded Ends 2x Fixture to bracket connectors 2x Wire cable screw clamps 4x Wire cable management slides 1x Level 6x Mounting screws    Floating Suspension Kit Manual

    $124.99

    …your UV Sterilizer with Niche3D's UV Clamps!   Mounting UV Sterilizers can be difficult and in most cases, people will just prop them up in the corner which is not good for the sterilizer or your aquarium. Using a UV-Sterilizer Mounting Clamp lets you clamp the sterilizer's body in place while…

    $59.99

    …by turning the handle counterclockwise. It should be retracted slightly past the rubber gasket.Position the valve over the pipe and turn the loose clamp piece appropriately to fit the shape of your pipe.Firmly snug the valve to the pipe by turning the screw/bolt. This should be done by hand to avoid…

    Starting at:
    $7.99

    …here, and by following the included step by step directions, we had them put together in just a few minutes. The aluminum channel uses a special clamping system that securely holds them against each other, creating a secure and reliable bond.   Cabinet Stand Every IM APS Cabinet Stand comes with…

    $700.00

    …Dimensions - 10.24" L x 4.72" W x 1.125" T Input Voltage - 100v - 240V AC Total Power - 16W Max tank Clamping Thickness - .39" (1cm) Mounting Clamp Height - 6.69" Mounting Clamp Distance from Tank - 8" (approx.)   What's Included? 1x ZA1201 LED Module 1x Power Supply 1x Acrylic Mounting…

    $58.99

    …extension bar Multiple extension rails included in kit for different tank sizes X-bracket rotates for parallel or perpendicular mounting Innovative clamp system Cord Management   Not everyone can hang the EcoTech Radion from their ceiling. For this reason, EcoTech thoughtfully created the RMS or…

    $103.95

    …D - Royal Blue Channel E - Super Blue   Mounting The modular mounting system for the Maxspect Ethereal work with rimmed or rimless tanks and will clamp onto rims up to 1" thick. The variable distance of the mount lets you customize the distance from the back of your tank, correctly centering it over…

    $499.99

    …it with the slip adapter and you are done! Just add your favorite Loc-Line nozzle or Vivid Creative's RFG Nozzle. No glue, tape, heat, or clamps are needed!   If you want the output of the return nozzle to be below the water line, check out Vivid Creative Aquatic's Drop Adapters.   Compatible…

    Starting at:
    $7.95

    …2 part onto your cabinet stand or floors. For a cost-efficient and functional dosing tube holder, the Bubble Magus Tube Holder Bracket is perfect. Clamps onto 1/2" thick acrylic or glass Holds up to 4 tubes Clear acrylic Solid Construction   Dimensions - 1.5" L x 2.25" W x 1" H In Tank Dimensions -…

    $14.99

    …for the Aqua Illumination Hydra LED lighting systems.   Includes brackets for Hydra TwentySix and FiftyTwo Lights. Rails can slide for positioning Clamps on rimless tanks up to 1.125" thick Light brackets twist for perfect coverage   Between the HMS Rails, and the modular mounting brackets for the…

    $78.75

    …mounting bracket lets the arm spin into the perfect position while holding the light securely, right where you want it.  Each Flex Arm comes with clamps to secure the FiftyTwo or TwentySix series of LED lights along with tank mounting brackets that works with aquariums up to 1.0" thick.     The…

    $68.25

    …box. Accepts the Modular Return Pump Basket Filter Creates a steady water level for the protein skimmer Perfect spot for ATO sensors Titanium clamping Screws Crystal clear acrylic   The Modular Return Pump Basket Module fits perfectly in the Somatic line of Filter Systems letting you incorporate…

    $49.99 $29.99

    …V 3.5 Pump / F≤3500LPH: Return Pump Eheim C1000 pump: Drain Pump for skimmer compartment 4” Filter Sock Rigid PE under-mat Stainless Steel Hose Clamps* Silicone Hose for 25mm and 40mm Pipe coupling* Additional Red PVC Pipes for assembly to System – ~6.5’ per size* Additional Elbows, Tees, Unions,…

    $2,499.99 $1,499.99

    …extension bar Multiple extension rails included in kit for different tank sizes X-bracket rotates for parallel or perpendicular mounting Innovative clamp system Cord Management   Not everyone can hang the EcoTech Radion from their ceiling. For this reason, EcoTech thoughtfully created the RMS or…

    $93.45