Filter Monitor

SORT:
VIEW: 32/64
33 items found. Showing items 1 to 32 .

    The FM-2 RO Filter Monitor with Volumizer tracks up to five filter stages at once by time and volume. The monitor allows you to create filter change points at each stage at an individual point in the future or at a specific water volume. When the preset points are reached the FM-2 will alert you…

    $39.99

    Insurance against leaks and drips from RODI system, and many other household applications! The Latching solenoid automatically shuts off the flow of water and also makes a loud beeping noise when the sensor detects moisture 3/8" FNPT (ID) Threads or 1/2" BSP Threads (OD) Can be adapted to…

    $53.00

    …without a speedometer and gas gauge.  At some point you will end up in trouble.  With RODI systems it is TDS that you will want to monitor for performance and filter quality.  If you have a single or dual DI stage we highly recommend a triple TDS meter as it will allow you to see your TDS readings…

    $44.99

    …power you are actually using with the Kill A Watt PS-10 Power Strip. The power strip gives you 10 surge-protected outlets that will let you monitor Voltage, Amperage, KWH, Current Leakage, and much more! From real-time instant to time elapse consumption readings the Kill A Watt PS-10 is designed…

    $69.99

    …without a speedometer and gas gauge.  At some point you will end up in trouble.  With RODI systems it is TDS that you will want to monitor for performance and filter quality.  By using a dual TDS meter it will allow you to see your TDS readings in two places.  We will usually suggest putting one…

    $29.99

    Instructions and Guidelines Katalyst should be housed in a media reactor, canister filter, or fluidized-bed reactor with a means of controlling water flow through the media bed, and with a pre-filter in place to restrict particulate material from entering the reaction vessel. Moderate water flow…

    Starting at:
    $33.99

    …into aquarium. Canister filtration: Load resin into filter cartridge as directed by filter manufacturer; leave resin in place until [PO43-] reaches desired level or remains unchanged, as directed above. Slowing the flow of water through the filter may be required to obtain maximum effectiveness of…

    Starting at:
    $21.99

    …saltwater aquariums but most notably is used with Ultra Low Nutrient Systems (ULSN) like the Zeovit system. When using ZEOmix it is imperative to monitor water parameters, and add back necessary nutrients and elements that will be absorbed and collected by the zeolite media.   Instructions: Add 500g…

    Starting at:
    $11.99

    …be extended up to 10 days of total use. Canister filtration: Load NēoCarbonīt-Z into filter cartridge as directed by filter manufacturer. Passive filtration: Place NēoCarbonīt-Z loosely in an 800µm mesh filter bag and locate in an area of low- to medium-flow. Turning bag over once during usage…

    $13.49

    …8.000 liters (2113 gallons) of marine water. Overdosing can cause a negative effect in your tank due to rapid removal of phosphate and chemistry changes. It is recommended to use a small amount and gradually increase the amount of PO4x4 used, while monitoring the phosphate levels in your aquarium.

    Starting at:
    $21.99

    …tap water until all fines are removed. 2. Add ReMag to any calcium reactor at a ratio of 10% remag to 90% aragonite reactor media by volume. 3. Monitor magnesium levels in the aquarium for the next couple weeks. If you see magnesium levels are slowly dropping, simply increase the amount of ReMag…

    Starting at:
    $21.41

    …change colors as it gets exhausted.  That allows you to monitor the consumption of the DI resin and know when to change it out.  If you have a TDS meter we still recommend color changing resin as it will let you know when to monitor your TDS meter for when TDS starts creeping through the DI…

    Starting at:
    $13.99

    …will monitor the flow through plumbing on your aquarium. This is perfect for monitoring the health of your return pump, keeping an eye on your emergency drain, setting the levels on your various reactors and filters, or watching the flow to your RODI.     What's Included? 1x FMM Fluid Monitoring

    $199.95

    …is replaced. Completely fill the refillable cartridge insert with your preferred CO2 absorbing media and place back into the reactor housing. Monitor your tank's pH hourly for the first couple days of use. When your pH starts to drop in value (usually 1-2 weeks) you will need to replace the CO2…

    $35.99

    Why does BRS recommend this? Being able to monitor and maintain your RODI system is almost a necessity to know when your filters need service and if a problem does arise, having a pressure gauge and TDS meter makes troubleshooting much easier. The TDS meter will let you know when your DI resin is…

    Starting at:
    $59.99

    monitoring and safety precautions to be in place, but can be completely reliable if installed properly and maintained regularly. Installation only takes a couple of minutes, and the PF-Nano only requires 2.5" of clearance outside the tank to drain water down to a sump, refugium, or wet/dry filter.

    $93.99

    …more monitoring and safety precautions to be in place, but can be completely reliable if installed properly and maintained regularly. Installation only takes a couple of minutes, and the PF-300 only requires 3" of clearance outside the tank to drain water down to a sump, refugium, or wet/dry filter.

    $102.99

    …more monitoring and safety precautions to be in place, but can be completely reliable if installed properly and maintained regularly. Installation only takes a couple of minutes, and the PF-800 only requires 3" of clearance outside the tank to drain water down to a sump, refugium, or wet/dry filter.

    $112.99

    monitoring and safety precautions to be in place, but can be completely reliable if installed properly and maintained regularly. Installation only takes a couple of minutes, and the PF-1000 only requires 3" of clearance outside the tank to drain water down to a sump, refugium, or wet/dry filter.

    $126.99

    monitoring and safety precautions to be in place, but can be completely reliable if installed properly and maintained regularly. Installation only takes a couple of minutes, and the PF-1800 only requires 4" of clearance outside the tank to drain water down to a sump, refugium, or wet/dry filter.

    $169.99

    monitoring and safety precautions to be in place, but can be completely reliable if installed properly and maintained regularly. Installation only takes a couple of minutes, and the PF-1000 only requires 3" of clearance outside the tank to drain water down to a sump, refugium, or wet/dry filter.

    $140.99

    …is replaced. Completely fill the refillable cartridge insert with your preferred CO2 absorbing media and place back into the reactor housing. Monitor your tank's pH hourly for the first couple days of use. When your pH starts to drop in value (usually 2-4 weeks depending on tank size and CO2…

    Starting at:
    $129.99

    …is replaced. Completely fill the refillable cartridge insert with your preferred CO2 absorbing media and place back into the reactor housing. Monitor your tank's pH hourly for the first couple days of use. When your pH starts to drop in value (usually 2-8 weeks depending on tank size and CO2…

    Starting at:
    $239.99

    …Value Plus RO/DI System Gallons Per Day 75 100 150 200 Sediment Filter Purtrex 5 Micron Depth Sediment Filter  Purtrex 5 Micron Depth Sediment Filter  Purtrex 5 Micron Depth Sediment Filter  Purtrex 5 Micron Depth Sediment Filter  Carbon Block BRS VOC 5 Micron Carbon Block  BRS VOC 5 Micron Carbon…

    Starting at:
    $214.99

    …Saver Premium Plus RO/DI System Gallons Per Day 75 100 150 200 Sediment Filter GE ROSave.Z 1 Micron Depth Sediment Filter GE ROSave.Z 1 Micron Depth Sediment Filter GE ROSave.Z 1 Micron Depth Sediment Filter GE ROSave.Z 1 Micron Depth Sediment Filter  Carbon Blocks Dual BRS 1 Micron Universal Carbon…

    Starting at:
    $264.99

    …Plus RO/DI System Gallons Per Day 75 100 150 200 Sediment Filter GE ROSave.Z 1 Micron Depth Sediment Filter GE ROSave.Z 1 Micron Depth Sediment Filter GE ROSave.Z 1 Micron Depth Sediment Filter GE ROSave.Z 1 Micron Depth Sediment Filter  Carbon Blocks Dual BRS 1 Micron Universal Carbon Blocks…

    Starting at:
    $289.99

    …rate the fewer TDS your product water will contain resulting in longer lasting resin. The best way to keep the membrane rejection rate up is to monitor and change your prefilters appropriately as well as maintain at least 50psi going into the membrane. Ensure the resin is packed in the cartridge…

    $23.99

    …rate the fewer TDS your product water will contain resulting in longer lasting resin. The best way to keep the membrane rejection rate up is to monitor and change your prefilters appropriately as well as maintain at least 50psi going into the membrane. Ensure the resin is packed in the cartridge…

    Starting at:
    $11.99

    …remove 100% which is the overall goal for reef tank water. That is where deionization (DI) resin comes into play, by taking place as the last "filter" of a RODI system after the membrane. DI resin is ionically charged as either a cation (+) or anion (-) to exchange hydrogen or hydroxide molecules…

    Starting at:
    $14.99

    …with time. Medium- to High-nutrient Systems: Add 5 ml (1 capful) per 50 US-gallons (189.3 L) [≈2 drops per gallon (3.8 L)] of aquarium water daily. Monitor concentrations of phosphate and nitrate with accurate test kits; phosphate and nitrate should eventually become immeasurable (or nearly so) when…

    Starting at:
    $9.49

    …resin and is backed up by a mixed bed of resin for final polishing. Using the resin in a single bed form allows for greater efficiency, letting you filter more water for less money. Each BRS 7 Stage Pro Plus system includes multiple accessories from source water connections, pressure gauge, and a…

    Starting at:
    $339.99

    …layer and trouble breathing. When using Ich-X SW you will need to set up a quarantine tank with proper filtration, water movement, temperature monitoring, and top off since most of the time it can take up to 8 weeks to fully implement a type of treatment from start to finish.   Directions for Use To…

    $13.79