Holder

SORT:
VIEW: 32/64
164 items found. Showing items 1 to 32 .

    Somatic by Vertex The Somatic 60 Filter Sock Holder integrates directly with the 60 Filtration System. Purpose placed tabs lets the filter sock holder securely hold your drain plumbing directing it into a filter sock of your choice. Work with 4" Vertex Filter Socks Secures Drain Plumbing with a…

    $29.99 $17.99

    …as Red Sea has done all the planning for you and there is no gluing needed to assemble and seal all the plumbing. The sump includes a filter sock holder and sock to keep large pieces of debris and detritus from clogging pumps and other pieces of equipment. The water can then flow from the filter…

    Starting at:
    $5,175.00

    The Skimz tube holder can be used for a wide array of things. From water changes, dosing tubes, top off hoses, reactor hoses and much more. The hose holder works great for any tube or hose that you need to keep in place.    Dimensions: L90 X D65 X H45mm (3.54" X 2.55" X 1.77")  Max glass thickness:…

    $23.99

    The CPR Sock-It Filter Sock Holder is a simple filter sock holder using a gasket and acrylic holder. Very simple and inexpensive way to add filtration to any of your 1" outlets such as overflows and skimmer outlets. Three models each sold with or without filter sock: 4”- 1 inlet 7”-1 inlet 7”-2…

    Starting at:
    $26.99

    …methods (bag of carbon, bio balls, rubble rock, etc.). This feature is on the SUMP models only.   Locking Filter Sock Holder Filter socks snap and lock into the filter sock holders to secure the filter sock from falling out when it becomes clogged and needs to be cleaned or replaced. The 4” filter…

    $329.99

     Get the Perfect Drip Dosing liquids using a traditional tube holder allows the tube to curl which is less than ideal, the Dosing Pump Hose Connector & Holder uses acrylic tubes that securely attach to the holder. Angled bottom cuts allow liquids to flow out without ending up on your aquarium walls.…

    $7.99

    …even worse out of your sump and dosing 2 part onto your cabinet stand or floors. For a cost-efficient and functional dosing tube holder, the Bubble Magus Tube Holder Bracket is perfect. Clamps onto 1/2" thick acrylic or glass Holds up to 4 tubes Clear acrylic Solid Construction   Dimensions - 1.5"…

    $14.99

    Filter Socks remove excess food, detritus, organic waste, dust, and other particulates. Filter Socks also help prevent larger objects, such as sand, crabs, snails, etc. from damaging pump motors. Hang-On Filter Sock Mount. Easy installation and removal for tank cleaning or filter sock replacement.  …

    $24.99

    …Multi-Purpose, Magnetic Innovative Marine CustomCradle probe holders are clutter free and one of the easiest probe holders to use, and maintain. Thumb screws are a thing of the past with the magnetically coupled, padded probe and dosing tube holder. A single CustomCradle can hold probes, top off…

    $29.99

    Somatic by Vertex Four tube dosing line or ATO tube holder that is designed for the Somatic 60 Filtration System. Attaches directly to the sump wall Installs in seconds Hold up to 4 tubes Titanium Screws   The Somatic 60 Dosing Line Holder will hold your dosing pumps tubing or your ATO tubing…

    $26.99 $16.19

    CustomCradle-Specs   Probe holders will organize your probes from a tangled mess to an organized success. The CustomCradle probe holders are the perfect solution, making your sump look just as good as the display tank. Having your probes free floating around your sump could eventually cause issues…

    $34.99

    …then the probe holders are one of the final touches to a system that brings it from hobby grade to industrial looking. By plumbing your return with probe holders you can have the water that is going to feed your tank run through probes right before it enters the tank. The probe holder fitting it…

    $19.99

    The CPR Sock-It Filter Sock Holder is a simple filter sock holder using a gasket and acrylic holder. Very simple and inexpensive way to add filtration to any of your 1" outlets such as overflows and skimmer outlets. Three models each sold with or without filter sock: 4”- 1 inlet 7”-1 inlet 7”-2…

    Starting at:
    $30.99

    …sump holders. 200 Micron Filter Sock Filter socks come in mesh or felt and with a plastic ring or drawstring.   Mesh: Thin, doesn't clog as easily as felt Felt: Thicker, better at removing particles, but can clog faster Plastic Ring: attaches via ring that fits common sump holders Draw String:…

    Starting at:
    $5.99

    Clamps to tanks with rims measuring under 3/4" thick. With a simple screw adjustment your top off tubing will be super secure for years to come.

    $12.99

    …Seneye Mag Holder will hold your Seneye sensor right where you want it with their magnetic mounting system. Strong magnets 100% reef safe Enables water level alarm   The Seneye monitoring system relies on a slide system that is constantly submerged in the water. The Seneye Magnetic Holder now allows…

    $49.99 $29.99

    Recommended for aquariums: 106 to 370 Gal. Operating depth: 255 to 285mm (10 to 11 in.). Power Usage: 26W at 24V, Power supply unit: 100-240V / 50-60Hz, Dimensions with Magnet Holder:  L 5.5 x W 4.3 x H 12 in. Tank Thickness: 19mm (3/4").

    $349.99

    …reef safe   Two Models Available: Seneye Mag Holder - 3/8" max wall thickness Seneye Mag Holder Pro - 5/8" max wall thickness   Specifications: Dimensions - 3.4 H x 2.85" W x 1" D Max Tank Thickness - 5/8" (16mm)   What's Included 1x Seneye Mag Holder Bracket 1x Seneye Mag Holder Outer Magnet Set

    $59.99

    …Recommended Spread: 14" x 8" The Tunze LED system is a full spectrum light that is super easy to mount. Mounting the light is done with a magnetic holder that can hold the light in multiple positions and orientations. The innovative design is fully waterproof and is perfect for refugiums, and nano…

    $149.99

    Klir 7" Flow-Diverting Cap The Klir Flow Diverting cap works to cap any unused holes of your sock tray and direct the water into the Klir filter. It's adjustable and allows you to easily dial the the flow rate to divert excess flow or filter less aggressively.     The Flow Diverting cap will work…

    $19.99

    Filter socks are a great way to polish the water and export nutrients at the same time. For best results we do recommend changing out filter socks ever few days, to keep the detritus from breaking down and turning into nitrates. Between filter socks and running a good quality carbon in a reactor…

    $9.99

    Custom Molded Filter Socks for Innovative Marine All-in-One Aquariums. Compatible with: Nuvo 4, 8 & 16 Fusion 10 & 20 Atoll 12 Peninsula 14 & 20 Concept Abyss 20 Lagoon 25   Dimensions - 3.875" L x 2.25" W x 9.75" H    Innovative Marine has created their own custom molded filter socks that fit their…

    $8.99

    Genuine Skimz Replacement Parts. If you have lost, broken, worn, or simply just want a back up on hand we carry a wide variety of Skimz repalcement parts.

    $4.79

    The Skimz BM4 Filter Sock Holder is a great addition to any sump or tank that does not currently have the abiltiy to hold a filter sock. With the BM4 you can use almost all 4" filter socks on the market today, we do prefer to use the Skimz brand filter socks for the best fit however. The plastic set…

    $24.99

    FEATURES: Mechanical filtration made easy Installs onto regular vertical wall and Euro-braced sumps Tinted body and adjustable bracket height (approx 2”) Adjustable length inlet; extends for quieter and cleaner installation Requires vertical rims less than 1.25” thick and euro-bracing less than…

    Starting at:
    $36.99

    …water flow operation design Interchangeable floss filter box and filter sock holder (filter sock included) Removable heater holder, test probe holder and dosing holes included Removable auto-top-off float valve holder Water level adjustable (5”-12”) in protein skimmer, refugium and equipment…

    $229.99

    …water flow operation design Interchangeable floss filter box and filter sock holder (filter sock included) Removable heater holder, test probe holder and dosing holes included Removable auto-top-off float valve holder Water level adjustable (5”-12”) in protein skimmer, refugium and equipment…

    $269.99

    …water flow operation design Interchangeable floss filter box and filter sock holder (filter sock included) Removable heater holder, test probe holder and dosing holes included Removable auto-top-off float valve holder Water level adjustable (5”-12”) in protein skimmer, refugium and equipment…

    $309.99

    …water flow operation design Interchangeable floss filter box and filter sock holder (filter sock included) Removable heater holder, test probe holder and dosing holes included Removable auto-top-off float valve holder Water level adjustable (5”-12”) in protein skimmer, refugium and equipment…

    $369.99

    …water flow operation design Interchangeable floss filter box and filter sock holder (filter sock included) Removable heater holder, test probe holder and dosing holes included Removable auto-top-off float valve holder Water level adjustable (5”-12”) in protein skimmer, refugium and equipment…

    $469.99

    …settling in places you may not want it. With the Skimz Extended Life filter socks they will last much longer than standard mesh filter socks. 4" Plastic Ring Fits most sump holders Fits on Skimz Filter Bag Holder Dimensions: 4" x 14" (100mm x 355mm)   What's Included? 1x Skimz EL-L304 Filter Sock

    $8.74

    …you may not want it. With the Skimz Extended Life filter socks, they will last much longer than most other standard mesh filter socks. 7" Plastic Ring Fits most 7" sump holders Fits on Skimz Filter Bag Holder Dimensions: 7" x 16" (178mm x 406mm)   What's Included? 1x Skimz ELS-L307 Filter Sock

    $11.24