Housing

SORT:
VIEW: 32/64
194 items found. Showing items 1 to 32 .

    Membrane housings are relatively standard across the industry, and the only wearable parts are the o-rings that seal the housing. If the o-rings are kept lubricated with proper lubricant, they will last years without any problems. However over time the o-rings will go bad and with slight variations,…

    $8.99

    BRS 6 Stage RO/DI Systems are capable of handling almost any type of water your house may have and polishing it down to 0 TDS. Each system comes with dual Universal Carbon Blocks and Dual Color Changing DI stages, making it the perfect RO/DI system for almost any type of city water treatment…

    Starting at:
    $289.99

    …membrane is hands down the best membrane for our hobby. Up to 99% rejection Dow membrane* - NSF certified Compatible with all 10" RO Membrane Housings. Be sure to change the flow restrictor if you change the flow of your membrane.   FILMTEC reverse osmosis membrane elements for home drinking water…

    $34.99

    …installed before your system and used to house a sediment filter which allows you to use the two pre-filter canisters on your RO/DI system to house dual BRS Universal Carbon Blocks. The other canister should be installed after your system and used to house a second deionization cartridge and resin.…

    $99.99

    housing clips are used to attach the membrane to the RO bracket as well as to attach additional membranes or filters to the original membrane. 2.5" is the standard membrane size. Typically use 2" clips to attach smaller inline carbon filters. 2.5" Membrane Housing Clip 2.5" x 2 Membrane Housing Clip…

    Starting at:
    $0.99

    Replacement motor lid for Theiling Rollermat motors. If your Theiling Roller Mat has any parts that are damaged, worn, or you simply just want to keep an extra on hand we carry OE Theiling replacement parts.

    $15.99

    If your Theiling Roller Mat has any parts that are damaged, worn, or you simply just want to keep an extra on hand we carry OE Theiling replacement parts.

    $1.99

    Replacement motor housing screws for Theiling Rollermat motors. 4 pack If your Theiling Rollermat has any parts that are damaged, worn, or you simply just want to keep an extra on hand we carry OE Theiling replacement parts.

    $2.99

    …fluid metering head assembly for the Neptune DOS Fluid Metering System. The easy to install head replaces the tubing, roller, and plastic housing head cap. Installs in minutes Replaces wearable tubing   The Neptune DOS Replacement Head assembly comes with everything to replace the current…

    $29.95

    …total dissolved solids, and temperature with the HM Digital COM-100 Waterproof Meter. Automatic Temperature Compensation (ATC) IP-67 Waterproof Housing Large LCD Screen Auto-Off  Low-Battery Indicator Digital Calibration Factory Calibration   Conductivity Meters are ideal for many different water…

    $76.95

    Suspend your ReefLEDs in style! The contemporary frame will seamlessly house multiple ReefLED 90 LED light fixtures (sold separately) for easy suspension above your aquarium. The elegant housing is available in either black or white to match your decor and suspends from your ceiling using a secure…

    Starting at:
    $125.00

    Suspend your ReefLEDs in style! The contemporary frame will seamlessly house multiple ReefLED 90 LED light fixtures (sold separately) for easy suspension above your aquarium. The elegant housing is available in either black or white to match your decor and suspends from your ceiling using a secure…

    Starting at:
    $150.00

    Suspend your ReefLEDs in style! The contemporary frame will seamlessly house multiple ReefLED 90 LED light fixtures (sold separately) for easy suspension above your aquarium. The elegant housing is available in either black or white to match your decor and suspends from your ceiling using a secure…

    Starting at:
    $170.00

    Suspend your ReefLEDs in style! The contemporary frame will seamlessly house multiple ReefLED 90 LED light fixtures (sold separately) for easy suspension above your aquarium. The elegant housing is available in either black or white to match your decor and suspends from your ceiling using a secure…

    Starting at:
    $190.00

    …Double Ended (HQI) Reflector from Hamilton. HQI Bulbs sold separately. German-made mirror finish to increase light output Rust proof, aluminum housing with black powder coated finish Plugs into Hamilton, Lumatek, Sunlight or Galaxy ballast Includes 12 Ft cord with Hamilton 3-prong quick disconnect…

    Starting at:
    $149.99

    …bracket. 10” Long RO Canister Screw  - #10-12 x 1" - The long screw is required for the few holes where additional brackets or clips (ex. membrane housing clips) are installed. 20” RO Canister Screw - #14 x 1" -  20” screws are used for attaching 20” RO canisters to a RO bracket. Big Blue Canister…

    Starting at:
    $0.49

    …Auto-ranging three point calibration with digital fine tuning Includes 4 pH buffer solution in a sponge embedded in a clear cap Waterproof housing (IP-67 rating) Simultaneous temperature display Measurement Range: 0-14 pH Digital automatic calibration (one point), with digital fine tuning…

    $79.99

    …solution which results in more accurate measurements.  Factory Calibrated Platinum Electrode Water-Resistant Housing Requires 2 X AAA batteries (included)   The water-resistant housing and replaceable sensor will withstand use around your aquarium and with proper care will provide you with…

    $69.99

    …separately. Compatible with 175w and 250w Mogul Metal Halide Lamps Only German-made mirror finish increases light output Rust proof, aluminum housing with black powder coated finish Plugs into Hamilton, Lumatek, Sunlight or Galaxy ballast Includes 12 Ft cord with Hamilton 3-prong quick disconnect…

    $149.99

    …new again. Innovative Marine's Auqa Shield Replacement UV Lamps come with the bulb, but also a new bracket to replace the one that is currently housing the light. Just unscrew the quick connect to the power supply, pull the UV tower out, and slide the new one into the back chamber of your Nuvo or…

    Starting at:
    $24.99

    …grade neodymium magnets are an industry first in magnet safety.   Both wet side and dry side magnets are completely sealed in an acrylic housing and are completely submersible.   Accommodates plugs with larger stems such as ORA, ect. Includes a set of silicone pads to help protect your…

    $39.95

    …grade neodymium magnets are an industry first in magnet safety.   Both wet side and dry side magnets are completely sealed in an acrylic housing and are completely submersible.   Accommodates plugs with larger stems such as ORA, ect. Includes a set of silicone pads to help protect your…

    $59.95

    …grade neodymium magnets are an industry first in magnet safety.   Both wet side and dry side magnets are completely sealed in an acrylic housing and are completely submersible.   Accommodates plugs with larger stems such as ORA, ect. Includes a set of silicone pads to help protect your…

    $79.95

    …grade neodymium magnets are an industry first in magnet safety.   Both wet side and dry side magnets are completely sealed in an acrylic housing and are completely submersible.   Accommodates plugs with larger stems such as ORA, ect. Includes a set of silicone pads to help protect your…

    $69.95

    …grade neodymium magnets are an industry first in magnet safety.   Both wet side and dry side magnets are completely sealed in an acrylic housing and are completely submersible.   Accommodates plugs with larger stems such as ORA, ect. Includes a set of silicone pads to help protect your…

    $89.95

    …Poseidon 400 PR220 PRO PCS PRO   Cell Cleaning Instructions: Ensure the power is disconnected from the ozone generator, and remove the outer housing. Locate the discharge cell, and disconnect the female connector from the male HV connector located on the board. Remove the CD cell from the retaining…

    $34.95

    …through the adjustable return nozzle.    Specifications: Dimensions - 7.5" L x 2.5" W x 10.5" H Max Tank Thickness - 0.23" (6mm) Max Flow - 76 GPH Power Consumption - 4W @ 120VAC   What's Included 1x Bio Filter Housing 1x Bio Filter Lid 1x 3-Stage Filter Cartridge 1x Return Nozzle 1x Return Pump

    $29.99

    …grade neodymium magnets are an industry first in magnet safety.   Both wet side and dry side magnets are completely sealed in an acrylic housing and are completely submersible.   Xtra Strength Nano magnet sets can hold on over 3/4" glass thickness Accommodates plugs with larger stems…

    $54.95

    …of water increases free copper concentration by ~0.20 ppm. For use in fish-only aquaria. Not for use with scaleless fish. Not for use in aquaria housing live plants or invertebrates. Consult an appropriate reference source for the use of ionic copper solutions in aquaria before use.   Instructions…

    Starting at:
    $6.29

    Titanium heating tubes are virtually unbreakable, and corrosion resistant allowing the use in salt or freshwater aquariums. The titanium housing will resist damage a traditional heater would normally encounter while also providing another level of protection with the use of a plastic guard which…

    Starting at:
    $38.99

    Reef Brite Metal Halide Fixtures are easy to mount and provide great coverage with their reflectors. The aluminum housing and proprietary convection design allows for more passive cooling and produces up to 25% more light than other compact metal halide reflectors available. Available In: 150 Watt…

    Starting at:
    $224.22

    …aquarium temperature up to 10° over ambient temps.   Mini-Therm heaters were designed for pico aquariums, and are encased in a thermo-plasic polymer housing that is completely shatterproof. The heaters are always in the ON state with a ceramic heating element that evenly radiates heat throughout the…

    Starting at:
    $14.88