Membrane Housing

SORT:
VIEW: 32/64
10 items found. Showing items 1 to 10 .
  • 1

    Membrane housings are relatively standard across the industry, and the only wearable parts are the o-rings that seal the housing. If the o-rings are kept lubricated with proper lubricant, they will last years without any problems. However over time the o-rings will go bad and with slight variations,…

    $8.99

    …Tubing is commonly used for wastewater lines with reverse osmosis systems and is commonly found coming out of the waste-water fitting on the membrane housing.   Six Sizes Available: Each length will be a continuous piece. If you need a single piece longer than what is listed below, check out the…

    Starting at:
    $1.99

    …the membrane to the RO bracket as well as to attach additional membranes or filters to the original membrane. 2.5" is the standard membrane size. Typically use 2" clips to attach smaller inline carbon filters. 2.5" Membrane Housing Clip 2.5" x 2 Membrane Housing Clip 2.5" x 2.5" Membrane Housing

    Starting at:
    $0.99

    …GPD membrane has a 99% rejection ratio, and most other membranes cannot make that same claim. Along with meeting NSF/ANSI standards the 75 GPD DOW membrane is hands down the best membrane for our hobby. Up to 99% rejection Dow membrane* - NSF certified Compatible with all 10" RO Membrane Housings.

    $34.99

    Check valves only allow water to flow one direction. 1/8" Male NPT x 1/4" Push Connect elbow check valves are typically used on the product water output of RO membrane housings to protect from back pressure and allow auto shut off valves to operate correctly.

    $3.99

    Add the Aquatec 8800 Booster pump to your reverse osmosis unit if you have low water pressure in your house or want to get better performance out of your system. This booster pumps requires a transformer which is sold separately. If your RO system has an auto shut off kit or you are planning on…

    $99.99

    …bracket. 10” Long RO Canister Screw  - #10-12 x 1" - The long screw is required for the few holes where additional brackets or clips (ex. membrane housing clips) are installed. 20” RO Canister Screw - #14 x 1" -  20” screws are used for attaching 20” RO canisters to a RO bracket. Big Blue Canister…

    Starting at:
    $0.49

    …Tubing is commonly used for wastewater lines with reverse osmosis systems and is commonly found coming out of the waste-water fitting on the membrane housing.   Make sure to pick up an RO Tubing Cutter for easy and clean cuts every time!   What's Included? 1x 500 Foot Spool Black Polyethylene RO…

    $99.99

    …1 Micron Universal Carbon Blocks Dual BRS 1 Micron Universal Carbon Blocks Membrane 75 GPD Dow Filmtec Membrane* 100 GPD Dow Filmtec Membrane** Dual 75 GPD Dow Filmtec Membranes* Dual 100 GPD Dow Filmtec Membranes** Deionization Resin Dual Mixed Bed DI Stage with Refillable Cartridge Dual Mixed…

    Starting at:
    $289.99

    Add the Aquatec 8800 Booster pump to your reverse osmosis unit if you have low water pressure in your house or want to get better performance out of your system. The 3/8” fittings provide less back pressure if you require long runs of tubing. This booster pumps requires a transformer which is sold…

    $109.99
  • 1