Membrane

SORT:
VIEW: 32/64
75 items found. Showing items 65 to 75 .

    …Stage 2 - Pro Mixed Bed Cation DI Resin If you have an issue with phosphates, silica, or carbon dioxide not being completely removed from your RO membrane this is the perfect solution. The anion resin will neutralize negatively charged ions such as Si, CO2, and PO4 where the mixed bed cation resin…

    $64.99

    …installation on the metal frame common on most RO and RO/DI systems. This allows for readings at two locations in the system, such as after the RO membrane and after the DI resin stage, which is where water quality will most often change with filter performance.   The Titanium series of TDS meters…

    $33.99

    …most RO and RO/DI systems. This allows for readings at three locations in the system, such as the source line feeding the system, after the RO membrane and finally after the DI resin stage, allowing for monitoring at all major water quality locations.   The Titanium series of TDS meters from…

    $44.99

    …looked over due to the probes high price tag. Once the probe is purchased it can last a lifetime with the straightforward and easily replaceable membrane that is usually less than 10 dollars to replace. When it comes to probes, you get what you pay for, and Neptune has sourced one of the best lab…

    $94.95

    …Total cation capacity:  1.9 meq/mL min (Na+ form) Total anion capacity:  1.25 meg/mL min (cl+ form)   Note: Membranes are not included in standard filter replacement kits. Membranes should be replaced as needed.   *Nominal Micron rating for all above - 1 micron **2ppm free chlorine >90% reduction…

    $51.99

    …effectiveness.  BRS Pro Single Bed Cation Resin BRS Pro Single Bed Anion Resin BRS Pro Mixed Bed Cation Resin   Note: Membranes are not included in standard filter replacement kits. Membranes should be replaced as needed.   *Nominal Micron rating for all above - 1 micron **2ppm free chlorine >90%…

    $69.99

    …spikes increasing service life. This glycerin filled pressure gauge comes assembled with 1/4" quick connect fittings for quick easy installation in-line before the RO Membrane. This item is designed for use with our saltwater aquarium line of RO systems.   Pressure Gauge Installation Instructions

    $20.49

    …used to distinguish filtered water from raw source water. On most reverse osmosis systems the blue tubing will start immediately after the membrane.   Six Sizes Available: Each length will be a continuous piece. If you need a single piece longer than what is listed below, check out the 500-foot…

    $99.99

    …of the filter.  5 Micron - Works with most filter systems, and removes a majority of the particles that can cause issues with carbon blocks and membranes.    We recommend changing sediment filters when they are visibly dirty, or a drop in pressure is noticed.    Specifications: Cartridge Length -…

    Starting at:
    $39.99

    …of the filter.  5 Micron - Works with most filter systems, and removes a majority of the particles that can cause issues with carbon blocks and membranes.    We recommend changing sediment filters when they are visibly dirty, or a drop in pressure is noticed.    Specifications: Cartridge Length -…

    Starting at:
    $18.99

    …will naturally grow faster and are more robust, but Bio-Actif salt is great for fish too by increasing the protection against damage to mucous membranes, heightened sensitivity, and elevated mating activity.  Free of unwanted Nitrates & Phosphates Contains Bio-Active Marine Substances Includes…

    Starting at:
    $46.73