Neptune Cable

SORT:
VIEW: 32/64
56 items found. Showing items 1 to 32 .

    …and Apex Jr. from Neptune Systems are modular systems that allow you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex, Modules, and Energy Bars together. Please Note: AquaBus Cables are USB-type cables but Apex Systems…

    Starting at:
    $9.95

    …Module cable lets you connect two VarioS pump controllers or Gyre Interface Modules directly to a 0-10v controller like the Neptune Apex Controller.   Connect your VarioS or Gyre pumps directly to any controller with a 0-10v port that uses a standard ethernet jack to connect. The Y Modules Cable

    $11.99

    …the Apex System or the Advanced LED Dimming Module – VDM. This cable has a RJ45 plug on one end and bare wires on the other that must be connected in the manner recommended by your LED manufacturer. If you have four colors of LED that you want to dim, then you will need to buy two of these cables.

    $14.95

    …-  The Neptune Systems engineering team has taken extensive steps both in how the pump operates as well as the enclosure design to ensure that the DOS system is one of the quietest dosing systems on the market for the fluid volumes it delivers   WHAT'S IN THE BOX DOS pump Aquabus cable Power supply…

    $299.95

    …cord for Neptune Systems 1Link accessories that are found on the 1Link module and EnergyBar832. The Neptune 1Link Extension Cable lets you increase the distance between you WAV pumps, COR pump, or any other 1Link accessory. The cable has Male and Female ends directly connected to the cable allowing…

    $19.95

    …need the power supply or Aquabus cable for your DŌS Fluid Metering System. By having the Male x Male 4 pin cable you can now fully control the DŌS pump through your apex with just a single cable through the 1Link module or the EnergyBar 832.   Less Clutter One Cable Installation of DŌS Pump System

    $19.95

    …Extension Cables are great for extending your current Aquabus Cable if you need a little more length. The extension cables have a Male end on one side that will plug into any Apex module, and a female end on the other side that will connect to an existing Aquabus Cable. Standard Aquabus cables are…

    Starting at:
    $19.95

    Use the Kessil A360/A160 Neptune Apex Control Cable to connect your Kessil 360 (A360N/360W) or A160 LED lights to your Neptune Systems Apex controller. Type 1 - compatible with Neptune Systems Apex controllers Length: 6 Ft. (1800mm) without connectors Color: Black One End: 1/8" (3.5mm) stereo male…

    $19.95

    This 6.5ft cable allows you to run your Maxspect Gyre in both forward and reverse direction by using one full Variable Speed port on your Apex to connect two 0-10v signals to a single IceCap Gyre Interface Module. When using the Neptune Apex with the Gyre Interface module it allows complete control…

    $11.99

    …DC24 Extension Cable lets you increase the distance between your EB832 or 1Link module and the accessory being used. A perfect example is if you use the Neptune PMUP accessory pump as an ATO solution, and the reservoir is 15 feet away, you will need a few extra feet of cable to span the distance,…

    $17.95

    …with any Apex Controller (requires 1Link port) Don't have a 1Link port on your Apex System? Check out the Neptune 1Link Module Need a longer 1Link Cable? Check out the 1Link Extension Cable   Specifications: Pump Dimensions - 3.875" W x 4.875" H x 6.250" D Driver Dimensions - 3" W x 4" H x 1" D Max…

    $299.95

    …pH/ORP Probe Expansion Module to your Apex Neptune System. Module has extra Temp Probe port I/O Switch Inputs for ATO, feed buttons, leak alarms, etc. Monitor multiple tanks Galvanic Isolation for accurate and reliable probe readings   Features of the Neptune Systems pH/ORP Expansion Module: Monitor…

    $84.95

    The DC24 to Bare Wire Accessory Cable has two bare ends that have been tinned and ready for the accessory of your choice. The other end of the cable will connect to the 24v DC port on the EnergyBar 832 or the 1Link module. The port can be switched on and off just like any other outlet.   You can use…

    $17.95

    …input. This adds another controllable outlet to your Apex set up. So, for instance, if you do want to make your own ATO and attach our available PMUP or Solenoid Valve, you can do so. Simply add our 36W 24V DC power supply (available separately).   What's Included? 1x FMM Module 1x Aquabus Cable

    $99.95

    …synchronize the pumps, or anti-sync the pumps to give your tank the best flow available. The cable connects directly to the XStream-E controller utilizing the pumps original power supply. The other end of the cable can connect to any 0-10v DC reference controller that utilizes a RJ45 connection Flow…

    $19.99

    …Section - 6" x 10"   Designed for the Triton Method of Reefing! 9-gallon refugium Probe Holders Dosing tube holders Includes 1" drain fittings Cable holders Refugium light blocker Tuneable water levels Laser engraved water level markings   Adjustable Skimmer Water Level Protein skimmers can work…

    $414.99

    …operating modes like; feed, night, service, etc. Run Maxspect Gyre in Alternating Gyre Mode (additional cable required) Battery Backup Compatible Backward compatible with Maxspect 100 series. Neptune Apex Ready   Another great feature of the module is that it allows you to hook up your gyre to a…

    $124.99

    Connect your Apex Controller from Neptune to up to two Tunze Stream pumps. It has 1 RJ45 connector which plugs into the Apex base unit and 2 Din5 connectors which plug into 2 Tunze Controllable Stream pumps.

    $19.95

    A Zetlight LED fixture can have the capability to be controlled through a Neptune Apex Controller. With this cable you can control and set ramp points for all the channels on your controllable Zetlight fixture.

    $17.95

    …Controllers   Specifications Dimensions: 6.25" (accounting for AquaBus plug) x 3" x 3.75" Holds up to 100mL of most pellet and flake foods   What's in the Box AFS System Adjustable clips that extend to almost 2" Hook and loop tape 15 Ft AquaBus Cable Sample of Neptune Crossover Diet Pellet Fish Food

    $99.95

    …by Neptune Systems. Use Kessil A360 Neptune Apex Control Cable Digital Aquatics Reefkeeper. Use Kessil A360 ReefKeeper Control Cable Control multiple lights by connecting them with the Kessil A360 Unit Link Cable   What's in the Box Kessil A360W-E LED Light with cord Extension Cable AC Adapter…

    $349.00

    …of the gyre Set operating modes like; feed, night, service, etc. Run IceCap Gyre in Alternating Gyre Mode (additional cable required) Battery Backup Compatible Neptune Apex Ready   Another great feature of the module is that it allows you to hook up your gyre to a backup battery. The module…

    $124.99

    …of the gyre Set operating modes like; feed, night, service, etc. Run IceCap Gyre in Alternating Gyre Mode (additional cable required) Battery Backup Compatible Neptune Apex Ready   Another great feature of the module is that it allows you to hook up your gyre to a backup battery. The module…

    $124.99 $112.49

    …this new module allows for hundreds of different types of future Neptune Systems and current 3rd-party sensors to be connected to your Apex and have their data logged.   Kit Includes: ASM – Advanced Sensors Module NPS – Neptune PAR Sensor Real Reef Rock 6′ AquaBus Cable   Neptune PMK Instructions

    $299.95

    …0~10V Controller Apex Ready+ - Certified by Neptune Systems. Use Kessil A360 Neptune Apex Control Cable Digital Aquatics Reefkeeper. Use Kessil A360 ReefKeeper Control Cable Control multiple lights by connecting them with the Kessil A360 Unit Link Cable   A360N Specifications Dimensions: 3.8" Length…

    $349.00

    …0~10V Controller Apex Ready+ - Certified by Neptune Systems. Use Kessil A360 Neptune Apex Control Cable Digital Aquatics Reefkeeper. Use Kessil A360 ReefKeeper Control Cable Control multiple lights by connecting them with the Kessil A360 Unit Link Cable   A360W Specifications Dimensions: 2.96"…

    $349.00

    …flexible expansion via AquaBus Comes with 3′ AquaBus cable Fully upgradeable - WXM firmware and pump firmware can be updated for feature enhancement LED Status indicator and wireless status indicator Use your mobile device to view the wave action   Neptune WXM Owners Manual Neptune WXM Radion Setup

    $124.95

    …change in salinity from temp, to a top off unit being stuck on, if you have a Neptune Apex Controller we highly recommend investing in the PM2 module and salinity probe.   Add the Salinity Module: PM2 to your Apex Neptune System. Real-time monitoring of salinity in reef aquarium Module has extra…

    $84.95

    …Module Features: Plug and Play - Automatically recognized when installed into the system Comlete lunar simulation Two AquaBus connectors for flexible expansion to other modules via AquaBus Upgradeable firmware Compatible with all Apex systems Includes with 3 Ft. AquaBus cable   Manufacturer's Manual

    $64.95

    …connectors for flexible expansion via AquaBus Comes with 3 Ft. AquaBus cable Fully upgradeable via future firmware upgrades LED Status indicator Compatible with all Apex Systems NOTE: The VDM does not include any interface cables for your pumps. You must purchase those separately   Apex Ready…

    $99.95

    Add leak detection to your Neptune Apex Controller Neptune's LDK (Leak Detection Kit) includes everything you will need to add leak sensors to your Apex Controller within minutes. Includes two leak sensors Compatible with all Apex models Powered through Aquabus connection Add up to four total leak…

    $149.95

    …tubing connections   Specifications: Dimensions (approx) - 10.5" x 8.5" x 5.5" Capacity - 2000ml per side (0.52 gallons) Apex, Apex Lite, or Apex Jr. and DOS dosing system required to operate level sensors   What's in the Box? DDR with sensors and cable 4 meters of tubing Getting Started Guide

    $199.95