Neptune Plug

SORT:
VIEW: 32/64
42 items found. Showing items 1 to 32 .

    Neptune didn't stop there, with an all new mounting system on the Energy Bar orients the power strip in the correct direction keeping cords neat and tidy. While the outlets have a bit wider spacing, and orientated opposite of each other keeping room for those bulky transformers, allowing you to plug

    $289.95 Regular Price: $

    Neptune didn't stop there, with an all new mounting system on the Energy Bar orients the power strip in the correct direction keeping cords neat and tidy. While the outlets have a bit wider spacing, and orientated opposite of each other keeping room for those bulky transformers, allowing you to plug

    $2,129.60 Regular Price: $

    …of the Neptune Systems pH/ORP Expansion Module: Monitor and Control pH or ORP and temperature 6 digital inputs for float switches, water on floor sensors, pressure sensors, etc Full datalogging support in Apex Base module Up to 240 AquaBus modules can be added to the Apex system Plug and Play…

    $89.95 Regular Price: $

    …of that test and logs the value into your Apex. Easy Plug & Play Setup From the box to testing in under 15 minutes! Unlike other testing systems, there are no reagents to mix, tubes to cut, or pumps or probes to calibrate. Simply plug in one cable, two tubes, and run the setup task on the…

    $639.95 Regular Price: $

    …Cables are great for extending your current Aquabus Cable if you need a little more length.The extension cables have a Male end on one side that will plug into any Apex module, and a female end on the other side that will connect to an existing Aquabus Cable. Standard Aquabus cables are made up to…

    $21.95 Regular Price: $
    Choose Options

    …by strategically placing the probes around the stand, sump, and tank. Low-profile probe to be used in conjunction with the Advanced Leak Detection Module: ALD from Neptune Systems. Easily slips under carpet Low-profile design to easily hide away Plugs into the ALD with a modular RJ11 connection

    $29.95 Regular Price: $

    12v Power Supply for Neptune Apex Controllers applies power to the head unit If you have an Apex Controller, more than likely you are trying to protect against equipment failure, along with monitoring, and alarm capabilities that can notify you in the event when something is going wrong. The 12V…

    $15.95 Regular Price: $

    Connects to any Neptune 1Link or EB832! The intelligent Neptune COR-15 Return Pump is easily the smartest pump available. Directly connecting to any Neptune EnergyBar832 or 1Link module, you no longer have bulky power adapters or wall warts to power the COR pumps saving you outlet space and making…

    $314.95 Regular Price: $

    …Cord Rails: 7 Internal Shelf: 1x 7L x 2.5W Whats Included? Custom Neptune Systems Controller Board Neptune Systems LED Logo Board Power Supply Remote Control French Cleat Wall Mount 2x Cord Cutout Plugs 2x Velcro Mount Sets for LED Logo Board *Note: Neptune Systems Apex Controller sold separately.

    $379.99 Regular Price: $
    Choose Options

    …normal light cycle (called reverse daylight photosynthesis or RDP) also helps raise and stabilize your aquarium pH. Easy Plug & Play Setup Remove the GRO from the box, plug it into one of your available DC24 connections on an Energy Bar 832 or 1LINK module, select GRO from the tasks menu, and in…

    $144.95 Regular Price: $

    …sensor if you want a reliable sensor over a long period. The Neptune Optical Sensor plugs directly into the FMM allowing you to monitor the level of your sump, mixing station, or any other reservoir with liquid in it. This sensor plugs into your FMM and, using reflected infrared light, will signal…

    $27.95 Regular Price: $

    The Apex and Apex EL Controllers from Neptune Systems are modular systems that allow you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect the Apex controller, modules, and Energy Bars together. Available in 3 Ft., 6 Ft., 15 Ft.…

    $10.95 Regular Price: $
    Choose Options

    Neptune Apex Control Cable to connect your Kessil 360 (A360N/360W) or A160 LED lights to your Neptune Systems Apex controller. Specifications Type 1 - compatible with Neptune Systems Apex controllers Length: 6 Ft. (1800mm) without connectors Color: Black One End: 1/8" (3.5mm) stereo male phono plug

    $20.00 Regular Price: $

    Connect your Apex Controller from Neptune to up to two Tunze Stream pumps. It has 1 RJ45 connector which plugs into the Apex base unit and 2 Din5 connectors which plug into 2 Tunze Controllable Stream pumps.

    $20.95 Regular Price: $

    …reliability over a long period of time. The Neptune Optical Sensor plugs directly into the FMM allowing you to monitor the level of your sump, mixing station, or any other reservoir that has up to 1/4" thick walls. Includes Magnetic Mount This sensor plugs into your FMM and, using reflected infrared…

    $37.95 Regular Price: $

    …normal light cycle (called reverse daylight photosynthesis or RDP) also helps raise and stabilize your aquarium pH. Easy Plug & Play Setup Remove the GRO from the box, plug it into one of your available DC24 connections on an Energy Bar 832 or 1LINK module, select GRO from the tasks menu, and in…

    $144.95 Regular Price: $

    …LED color channels from your 0-10V dimmable LED light to the Apex System or the Advanced LED Dimming Module – VDM. This cable has a RJ45 plug on one end and bare wires on the other that must be connected in the manner recommended by your LED manufacturer. If you have four colors of LED…

    $15.95 Regular Price: $

    …change in salinity from temp, to a top off unit being stuck on, if you have a Neptune Apex Controller we highly recommend investing in the PM2 module and salinity probe. Add the Salinity Module: PM2 to your Apex Neptune System. Real-time monitoring of salinity in reef aquarium Module has extra Temp…

    $89.95 Regular Price: $

    …early can be the difference between saving a tank to an entire loss. Neptune's Leak Detection Kit is the perfect solution for anyone that uses an Apex Controller to monitor and control their aquarium. The LDK system will plug right into your current Apex through the Aquabus connections and includes…

    $154.95 Regular Price: $

    …LEDs per string High intensity LEDs with a wide angle lenses (100+ degrees) to provide the best possible coverage Lunar Simulator Module Features: Plug and Play - Automatically recognized when installed into the system Comlete lunar simulation Two AquaBus connectors for flexible expansion to other…

    $69.95 Regular Price: $

    …optical sensors plugin into the FMM. In standalone use when used in your ATO reservoir (plugged into port-4), the FMM will stop your PMUP and sound an alarm when the sensor is above the water level. If you plug it into port-3, and mount it high in your sump, if your water level ever goes that high,…

    $224.95 Regular Price: $

    …0-10V control Complete control of Apex Ready+ LEDs that use the serial interface Adds 4 independent 0-10V variable speed ports to the Apex system Plug and Play - Automatically recognizes when installed into the system 2 AquaBus connectors for flexible expansion via AquaBus Comes with 3 Ft. AquaBus…

    $104.95 Regular Price: $

    …early can be the difference between saving a tank to an entire loss. Neptune's Leak Detection Kit is the perfect solution for anyone that uses an Apex Controller to monitor and control their aquarium. The LDK system will plug right into your current Apex through the Aquabus connections and includes…

    $594.85 Regular Price: $
    Choose Options

    Less Hassle, More Success More than the color has changed. Neptune has listened to what you want, adding more standard features to the already reliable, and dependable Apex Controller. Built in WiFi, Salinity, Temperature, pH, monitoring. Set reminders, log testing and dosing information and much…

    $1,249.85 Regular Price: $

    …magnetic mount suitable for glass or acrylic up to 1/2" thick The Neptune MOS replaces the previous OS-1-M and features an updated design that fits into tighter spaces and helps to prevent water incursion into the sensor. The MOS plugs into an Apex FMM port and uses reflected infrared light to…

    $39.95 Regular Price: $

    …allowing you to plug in almost anything you want, where you want. *NEW* MOS Magnetic Optical Sensor The Neptune MOS replaces the previous OS-1-M and features an updated design that fits into tighter spaces and helps to prevent water incursion into the sensor. The MOS plugs into an Apex FMM…

    $889.90 Regular Price: $
    Choose Options

    …allowing you to plug in almost anything you want, where you want. *NEW* MOS Magnetic Optical Sensor The Neptune MOS replaces the previous OS-1-M and features an updated design that fits into tighter spaces and helps to prevent water incursion into the sensor. The MOS plugs into an Apex FMM…

    $599.95 Regular Price: $

    …FMM and these optical water-level sensors, you just plug them in! No wire-stripping, no breakout box necessary! LEAK DETECTION (OPTIONAL) In addition to flow monitoring and level-detection, the FMM can be used for leak detection. Simply plug in up to four of our new, super-sensitive leak detection…

    $209.95 Regular Price: $

    …FMM and these optical water-level sensors, you just plug them in! No wire-stripping, no breakout box necessary! LEAK DETECTION (OPTIONAL) In addition to flow monitoring and level-detection, the FMM can be used for leak detection. Simply plug in up to four of our new, super-sensitive leak detection…

    $104.95 Regular Price: $

    …to be activated when levels hit below optimal as well as send you an email or text message Add the Dissolved Oxygen Module: PM3 to your Apex Neptune System to allow continuous real time monitoring of your reef tanks dissolved oxygen levels. Real-time monitoring of dissolved oxygen in reef aquarium…

    $99.95 Regular Price: $

    Neptune didn't stop there, with an all new mounting system on the Energy Bar orients the power strip in the correct direction keeping cords neat and tidy. While the outlets have a bit wider spacing, and orientated opposite of each other keeping room for those bulky transformers, allowing you to plug

    $2,846.45 Regular Price: $

    Neptune didn't stop there, with an all new mounting system on the Energy Bar orients the power strip in the correct direction keeping cords neat and tidy. While the outlets have a bit wider spacing, and orientated opposite of each other keeping room for those bulky transformers, allowing you to plug

    $1,239.90 Regular Price: $
    Choose Options
Sign Up Now