Neptune Systems

…metering system without the need for any additional power supplies or consuming additional outlets. The EB832 also has 3 AquaHub connections letting you expand to any existing or upcoming module making your Apex System truly limitless. Neptune didn't stop there, with an all new mounting system on…

…ports to the Apex system Plug and Play - Automatically recognizes when installed into the system 2 AquaBus connectors for flexible expansion via AquaBus Comes with 3 Ft. AquaBus cable Fully upgradeable via future firmware upgrades LED Status indicator Compatible with all Apex Systems NOTE: The VDM…

…(available separately) it creates a fully automated system for the proper dosing of supplements, maintaining them at consistent levels. Automatically performs Calcium, Alkalinity, and Magnesium tests Includes 1-month of reagent Combine with Neptune DoS for automated dosing Programmable alerts for…

…with the Dream Neptune Apex Controller System! Everything from programmable outlets to fish feeding and dosing control, along with flow and leak detection functionality. The Neptune Apex Dream Bundle is exactly what every aquarist needs.    Kit Includes: 1x Apex Controller System 2x Energy Bar 832…

Support up to 11 EcoTech VorTech Pumps - simultaneously with the Neptune Systems VorTech Wireless Expansion Module: WXM Add this module to your Apex Controller and control multiple VorTech Propeller pumps and Radion LEDs based on time of day, feed mode, power outage mode and so much more. Complete…

…Probe Expansion Module to your Apex Neptune System. Module has extra Temp Probe port I/O Switch Inputs for ATO, feed buttons, leak alarms, etc. Monitor multiple tanks Galvanic Isolation for accurate and reliable probe readings   Features of the Neptune Systems pH/ORP Expansion Module: Monitor and…

Perfect for controlling your RODI system, top off system, calcium reactor, or other low flow items that use 1/4" tubing. The solenoid valves uses the 24V accessory port found on 1Link modules and the EnergyBar 832.   Solenoid Valve (SV-1) This 24VDC powered, normally-closed (NC), solenoid valve has…

WAV Extreme Flow for your Aquarium Neptune Systems has been proving you ability to control your tanks in every aspect imaginable. With the Neptune Apex controllers and add-on modules, almost anything is possible. Now with the WAV pump from Neptune, even more control is at the tip of your…

Add additional control to your Neptune Apex Neptune Systems Energy Bar 8. This is NOT just a power strip. 8 Independently Controlled Outlets 6 rated at 5A@120V AC 2 rated at 10A@120V AC 16-Gauge, powder-coated aluminum construction - best protection against a catastrophic failure Energy consumption…

…aquariums are alike, Neptune Systems included IQ-Level technology with every COR pump. Customize the minimum and maximum speed settings for your tanks plumbing to the ideal flow rate, but also the minimum flow rate for in tank flow and feed modes as well.    Whisper Quiet Neptune's COR uses the…

A Complete, Simple, & Standalone ATO! If you want a safe ATO system, the Neptune System ATK v2 uses a mixture of optical eyes and a float valve to ensure your tanks water level stays the same while preventing overfills. With the ATK v2 you do not need an Apex Controller since it can be run 100%…

…you ever wonder how much flow your pump is actually moving through your display, reactors, refugiums or anything else that you is plumbed into your system.  The Flow Monitoring Kit (FMK) will unlock a world of control for any apex model! Flow Monitoring Kit Includes: FMM Module 1" FS-100 Flow Sensor…

…longer do you need an adapter cable to control the pump, and it is compatible with a wide variety of controllers like the Neptune Apex Controller, CoralVue Hydros Systems, and GHL. Soft startup Precise speed adjustment in steps of 0.1% Wide range input with active power factor correction Integrated…

…with Neptune DOS Fluid Metering System and Neptune WAV pumps.   The WAV is the first of a line of aquarium products from Neptune Systems that will use a completely new interface. While many in the aquarium world continue to embrace wireless technologies for interconnectivity, Neptune has decided…

…this new module allows for hundreds of different types of future Neptune Systems and current 3rd-party sensors to be connected to your Apex and have their data logged.   Kit Includes: ASM – Advanced Sensors Module NPS – Neptune PAR Sensor Real Reef Rock 6′ AquaBus Cable   Neptune PMK Instructions

The Neptune FMM & DOS power supply is 24VDC, 36W and can be used with the FMM so that you can attach the powered accessories above like the PMUP or the Solenoid Valve. It also is compatible with the Neptune DOS Fluid Metering System. This power supply is for 110V USA-style outlets.   What's…

…like to use the Bulk Reef Supply Aquarium Heater Controller to create a stand-alone heater management system, but works great with full-blown aquarium controllers like the Neptune Systems Apex Controller.    Heater Wattage Power Consumption Length/Diameter Suggested Tank Size Power Cord Length…

…– Dual DOS Reservoir.   Super silent operation -  The Neptune Systems engineering team has taken extensive steps both in how the pump operates as well as the enclosure design to ensure that the DOS system is one of the quietest dosing systems on the market for the fluid volumes it delivers   WHAT'S…

…the Dream Neptune Apex Controller System! Everything from programmable outlets to fish feeding, fully automated dosing control, along with flow and leak detection functionality. The Neptune Apex Dream Bundle is exactly what every aquarist needs.    Kit Includes: 1x Apex Controller System 1x Trident…

…Compatible with FMM Weighted to stay flat Can be placed almost anywhere   The LD-2 is a full size leak detection probe that is compatible with the Neptune FMM module only. The full size sensor is great for inside of your stand, on hard floors, ontop of skimmer cups and any other application that a…

…Triton44 V2 includes a configurable drain adapter, that lets you place an additional drain pipe anywhere you want. If you have a bean animal drain system, place it in the skimmer chamber. Want to use it for your return plumbing? Place it over the return chamber. With simple thumb screws, the adapter…

…the Dream Neptune Apex Controller System! Everything from programmable outlets to fish feeding, fully automated dosing control, along with flow and leak detection functionality. The Neptune Apex Dream Bundle is exactly what every aquarist needs.    Kit Includes: 1x Apex Controller System 1x Trident…

…direction by using one full Variable Speed port on your Apex to connect two 0-10v signals to a single IceCap Gyre Interface Module. When using the Neptune Apex with the Gyre Interface module it allows complete control over the pumps at any point throughout the day.  With simple visible graphing…

…Jr. from Neptune Systems are modular systems that allow you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex, Modules, and Energy Bars together. Please Note: AquaBus Cables are USB-type cables but Apex Systems does not…

…coupler will attach to 1/2" female NPT threads.   If you are one of the few reefers that wants their system looking like a laboratory, then the probe holders are one of the final touches to a system that brings it from hobby grade to industrial looking. By plumbing your return with probe holders you…

The FMM (Fluid Monitoring Module) is a multi-purpose module that, with the help of various accessories, enables your Apex to do: Flow Monitoring Leak Detection Water Level Detection Power 24VDC accessories Future sensors     Return pumps Measuring the flow of your aquarium’s main return pump is an…

…Control System The new Apex's Head Unit now includes the ability to have salinity monitoring, pH, ORP, and Temperature monitoring right out of the box. The completely new design also incorporates a sleek, rotating mounting system letting you securely mount the brains of the Apex system while having…

If you have the Neptune Systems Dissolved Oxygen Probe, then this is the direct replacement kit for that probe. The replacement kit will include 5 membranes and cleaning solution. The DO probe is not a cheap item and by simply replacing the membrane within the probe it will act just like new again.…

…a long span of time and most reefers will set up an automated system that doses their aquariums needed additives daily removing repetitive (and forgettable) chore. There are purpose-built dosing systems like the Kamor X4, Neptune DOS, or Bubble Magus T-11 that are super easy to program and keeps…

Know Your Flow! 1/4" Flow Sensor for the Fluid Metering Module from Neptune.  The FS-25 will work with flow rates from 3-12 gph, and will connect to any standard 1/4" push connect tubing. Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to…

…to span the distance, and instead of moving your reservoir, or Energybar you can now just extend the 24v accessories cord. The DC24 Extension Cable comes with prefitted male and female ends that will directly connect to Neptunes integrated DC24v system.   What's Included? 1x DC24 10' Extension Cable

Know Your Flow! 1" Flow Sensor for the Fluid Metering Module from Neptune.  The FS-100 will work with flow rates from 150-1500 gph, and will connect to any standard 1" Slip PVC.   Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM,…