Ph Probe

SORT:
VIEW: 32/64
58 items found. Showing items 1 to 32 .

    …Cord   BRS Lab Grade pH Probe Features: Double Junction Probe: A double junction probe has a second seal and junction found at the center of the probe. The double junction design adds to the cost and complexity of the probe but they are recommended in instances where the probe will come in contact…

    $59.99

    pH Probe is compatible with any monitor or controller with a BNC style connection. If you just need to replace your worn out probe or add another you will not be disappointed with the double junction feature of these probes. Most probes have a single chamber to house the actual reference probe and…

    $74.95

    The PINPOINT pH Replacement Probe was designed specifically with aquariums in mind. It features long continuous duty life expectancy, fast response and is non-toxic to aquarium systems.   Features 10ft cable with high interference suppression jacket Ag-AgCl reference 99.9% pure platinum   Note:…

    $39.99

    …your pH probe or pen. Many pH probes will start to loose their calibration in as short as a month or two depending on your probe. We suggest calibrating probes every 30-60 days for the most reliable readings. Available in: 4.01 pH 7.01 pH 10.01 pH   Compatible with all pH meters and probes.  …

    Starting at:
    $1.09

    …maintenance the Pinpoint pH monitor should last a lifetime.   Features Includes pH probe and calibration fluids pH probe has a 10ft high suppression cable and BNC connector Monitor is powered by a 9-volt battery (not included)   What's Included? Pinpoint pH Monitor pH Probe 7.0 & 10.0 Calibration…

    $94.99

    …10 Ft cord   BRS Lab Grade pH Probe Features: Single Junction Probe: Single junction probes are used widely for their reliability and economical pricing. In a perfect world we would always recommend double junction probes, but in many cases, single junction probes will last just as long, but…

    $34.99

    …to 4, 7, and 10 pH. The meter can be recalibrated with digital calibration using the push buttons, rather than a screwdriver. Includes a cap, batteries, lanyard, and pH 7.0 buffer   Specifications: pH Range: 0 - 14 Temperature Range: 0-80 °C; 32-176 °F Resolution: 0.01 pH; Temperature resolution…

    $79.99

    …run their probes directly inline with their plumbing. By using a probe coupler you can simply insert a tee in the line and screw in the probe holder for a leak-free way to have water continuously flowing around your probes giving consistent readings. With most standard pH, ORP, and salinity probes

    $19.99

    …1x Lab Grade Salinity Probe 1x Lab Grade Double Junction pH Probe 1x Lab Grade Double Junction ORP Probe 1x Temperature Probe Salinity and pH calibration solutions   Apex Control System The new Apex's Head Unit now includes the ability to have salinity monitoring, pH, ORP, and Temperature monitoring…

    $799.95

    …1x Trident Cal, Alk, & Mag Water Analyzer 1x 2-Month Trident Reagent Supply 1x pH PRobe 1x Temp Probe 1x ORP Probe 1x Salinity Probe Calibration Solution     Apex Controller System Built-in WiFi, Salinity, Temperature, pH, monitoring. Set reminders, log testing, and dosing information and much more…

    $1,399.90

    …(automatic temperature compensated) which means values will be more accurate. The pH electrode can be changed, meaning that you will not have to throw away the HI98129 after the probe has exhausted. Almost all pH sensing devices will last about a year or so until the electrode needs to be replaced,…

    $157.99

    pH probe and salinity probe for reef tank conditions. The single-use packets make calibration procedures easy and only requires clean water to rinse the probe between calibrations. Neptune Systems uses only quality ingredients when producing their calibration solutions ensuring accuracy.   pH Probe

    $6.85

    …Specifications: Range: 0.0 to 14.0 pH Resolution: 0.1 pH Accuracy: +/-0.2 pH pH set point 5.5 to 9.5 pH Visual LED pH Alarm: active when measurement is higher or lower than set point pH Probe: MA911B/2 (included)  pH Electrode: Double junction pH electrode with 2 meter cable (BNC connector) …

    $130.99

    …MW101 pH Meter with battery is a low cost, high quality and reliable pH meter. The Milwaukee MW101 pH Meter ships complete with a pH probe, calibration solution, a 9V battery, instruction manual and a screwdriver for easy calibration. Milwaukee Instruments offers the most affordable pH and ORP…

    $96.99

    …mounted probe holder will keep your probes exactly where you want them in your sump, while only taking up a minimal amount of space.   CustomCradle XL: Holds up to 4 probes, 4 dosing tubes and 1 top off tube (up to 1/2 inch) Compatible with all temp, pH, conductivity and ORP probes including…

    $34.99

    …equipment looking perfect.   Monitor and Control Temperature pH Outlets 24VDC accessories WAV pumps Individual outlet power consumption   What's Included? 1x ApexEL Base Unit 1x EnergyBar 832 1x Temperature Probe 1x Double Junction pH Probe 1x 6ft AquaBus Cable 1x 7.0pH Calibration Solution Packet…

    $499.95

    …of the probe.   4.01 pH - The lower threshold reading your pH monitor or controller will require for use with calcium reactors for saltwater aquariums, solutions below 7.00 pH and also most freshwater aquariums. 7.01 pH - Neutral pH calibration packet. This is used by almost all pH monitors…

    Starting at:
    $0.99

    …mounted probe holder will keep your probes exactly where you want them in your sump, while only taking up a minimal amount of space.   CustomCradle Nano: Holds up to 3 probes and 2 dosing tubes Compatible with all temp, pH, conductivity and ORP probes including Neptune Apex Temperature Probe

    $29.99

    …System. Module has extra Temp Probe port I/O Switch Inputs for ATO, feed buttons, leak alarms, etc. Monitor multiple tanks Galvanic Isolation for accurate and reliable probe readings   Features of the Neptune Systems pH/ORP Expansion Module: Monitor and Control pH or ORP and temperature 6 digital…

    $84.95

    …your pH probe calibrated! Neptune Systems single-use pH calibration packets make calibrating your pH probe simple and fast. Just tear open the top, and a stick your probe into the solution when performing the calibration procedure.    Over the course of a couple months, it is common for pH probes to…

    $1.95

    …American Marine Pinpoint pH Controller will monitor and control pH levels in an aquarium. This pH controller controls pH in an upward and downward direction. With proper care, this Pinpoint pH Controller should last a lifetime.   Pinpoint pH Controller Features: Includes probe and calibration fluids…

    $219.99

    …Includes: 1x ApexEL Base Unit 2x EnergyBar 832 1x Temperature Probe 1x Double Junction pH Probe 1x 6ft AquaBus Cable 1x 7.0pH Calibration Solution Packet 1x 10.0pH Calibration Solution Packet   The ApexEL has built-in WiFi, Temperature, pH, monitoring and much more!. Set reminders, log testing and…

    $769.90

    …in top condition and replace your pH probe regularly with the GHL factory probe.   GHL pH electrodes are made of the highest laboratory grade. They are durable, low maintenance, and matched to the highest German quality standards. GHL's pH probe features extra-long connection cables (3 m), which…

    $74.99

    Hanna's General Purpose Cleaning Solution is great for cleaning electrodes on your Apex, ReefKeeper and BRS pH and ORP probes. Clean the liquid junction of your electrodes once a day or at least once a week to prevent clogging and to maintain accuracy. Immerse the electrode in the proper cleaning…

    $14.00

    The Milwaukee MW500 ORP Monitor is a low cost, high quality and reliable ORP monitor. Milwaukee Instruments offers the most affordable pH and ORP aquarium equipment. The attractive price and high quality has made Milwaukee an increasingly popular choice for aquarists. Milwaukee Smart meters are…

    $110.99

    …your pH probe calibrated! Neptune Systems single-use pH calibration packets make calibrating your pH probe simple and fast. Just tear open the top, and a stick your probe into the solution when performing the calibration procedure.    Over the course of a couple months, it is common for pH probes to…

    $1.95

    …- 8.75" L x 6" W x 3" H Power Input - 24V pH Probe Calibration Points - 4pH & 7pH   What's Included? 1x KH Director Body 1x GHL 2.1 SA White Body Master 4-Head Dosing System 1x pH Probe 1x 500 mL KH Director Reagent 1x 4.0 pH Calibration Solution 1x 7.0 pH Calibration Solution 8x Dosing Connectors…

    $849.90

    …everything is easier from calibrating probes to customizing outlets. Fusion gives you the ability to monitor and control your Apex from anywhere in the world.   Apex Control System The new Apex's Head Unit now includes the ability to have salinity monitoring, pH, ORP, and Temperature monitoring…

    $399.95

    …7.01 pH - Neutral pH calibration packet. This is used by almost all pH monitors and controllers for calibration.  10.01 pH - The higher threshold reading your pH monitor or controller will require for use with saltwater aquariums or solutions above 7.00 pH   Compatible with all pH meters and probes.

    Starting at:
    $22.99

    …  MC122 Specifications: Range: 0.0 to 14.0 pH Resolution: 0.1 pH Accuracy: +/-0.2 pH pH set point 5.5 to 9.5 pH Visual LED pH Alarm: active when measurement is higher or lower than set point pH Probe: MA911B/2 (included) pH Electrode: Double junction pH electrode with 2 meter cable (BNC connector) …

    $796.00

    …design Aquatrance 1200 Pump pH probe holder included (probe sold separately)   A calcium reactor is used to maintain a balanced amount of calcium and alkalinity in your reef tank. In order to use a calcium reactor, you will need a CO2 regulator, CO2 tank, pH probe/controller, small feed…

    $299.99

    …feeding: Self-suction water intake For Aquariums up to 200 gallons Includes pH probe holder Includes Bubble Counter   The Skimz Monzter CM117 is a small calcium reactor packed full of features. With a built-in pH probe holder; bubble counter, easy to use fittings, and an integrated feed and…

    $318.99