Pressure

SORT:
VIEW: 32/64
201 items found. Showing items 1 to 32 .

    …(deionization) stage and add a pressurized tank and faucet to your reverse osmosis system. The pressurized tank insures that 3.2 gallons of water will be available on tap for immediate drinking water. RO/DI unit sold separately.    Kit includes: 3.2 gallon pressurized tank RO tank valve Silver…

    $99.99

    …If your RO system has an auto shut off kit or you are planning on installing one the Aquatec PSW Pressure Switches (sold separately) is also required. Benefits of maintaining higher water pressures   Improved waste water ratio Improved membrane rejection performance Reduced DI resin consumption…

    $99.99

    …be a long cylindrical shape. 3. Locate your product water line and place the pressure switch anywhere after the system's auto shut off valve (ASOV), we suggest placing it directly after the ASOV.  4. Connect the Pressure Switch Molex connectors into the Power Supply and also the auto flush flow…

    Starting at:
    $104.99

    Installation Instructions   1/4" Automatic shut off valves are used with float valves or pressurized tanks to shut off an RO system. It utilizes the back pressure created by the float valve or pressurized tank to shut off the water supply to the membrane. Without an automatic shut off valve waste…

    $9.99

    …the pressure tank.   Almost all drinking water pressure tanks will have a standard male threaded nipple on the tank which allows water to enter and exit the tank. The RO Tank Shut Off Valve will let you turn the water feed on and off from the pressure tank. By simply screwing onto the pressure tank…

    Starting at:
    $5.99

    …system to make on demand water when filling up a glass for drinking. A Pressure tank will store the filtered water under pressure and allow it to come out at a much greater speed saving you time. Reverse Osmosis Pressurized Tank 4 Gallon tank Holds approxamately 3.2 gallons of water.   Reverse…

    $49.99

    pressure is a leading cause of poor RO system performance. A pressure gauge assures that proper pressure is being supplied. It will also make pressure drops apparent which can tell you that sediment and carbon blocks need to be changed. Glycerin filled pressure gauges absorb vibration and pressure

    $20.49

    …of minutes.   Compatible with: 150 GPD Water Saver Upgrade - All BRS 75 GPD RO/DI Systems 200 GPD Water Saver Upgrade - All BRS 100 GPD RO/DI Systems   Recommended Conditions: Minimum Water Pressure - 65 PSI Max Water Pressure - 90 PSI Recommended Water Temperature - 77°F Recommended Max TDS -

    Starting at:
    $59.99

    …8800 Booster Pump - all in one kit. It also includes the pressure switch so it will work with reverse osmosis units that are set-up to shut off automatically. ¼” Push Connect fittings. Benefits of maintaining higher water pressures Improved waste water ratio Improved membrane rejection performance…

    $149.99

    The Aquatec pressure switch is used to shut down the pump when the switch detects pressure build up caused from your holding container becoming full. Most often triggered with a float valve Your system must have a working auto shut off kit for this switch to work properly. ¼” Push Connect fittings…

    $19.99

    …increase pressure, but it has an integrated auto-flush valve and safety pressure switches, simplifying and automating your RO/DI production process. The high & low pressure safety cutoff switch Buddie Fit press-fittings Sealed pressure pump Fast & Easy installation Increase water pressure up to 90…

    $129.99

    Useful if your homes water pressure is dangerously high. Series P60 Miniature Plastic Water Pressure Regulators are used in general purpose and OEM applications to regulate the pressure in systems that require a constant downstream and accurate flow performance. It consists of a thermoplastic body…

    $59.99

    …unit. Low water pressure is a leading cause of poor RO system performance. A pressure gauge assures that proper pressure is being supplied. It will also make pressure drops apparent which can tell you that sediment and carbon blocks need to be changed.   This air filled pressure gauge comes…

    $12.99

    …the knob is engaged, the high pressure could damage the low pressure gauge, or affect its accuracy and void the warranty. Open main valve on tank (very, very slowly) Note pressure on gauge Close valve Wait 5 minutes If successful, (no seepage) the previously noted pressure should NOT have bleed down…

    $359.99

    …it the most commonly used 100 GPD membrane used in the aquarium industry. If you require slightly faster water production and have good water pressure this is one of the better options.   TIP -Brand new membranes will have a slight coating on them to help preserve the membrane until it is ready…

    $46.99

    …58) Two year manufacturer’s warranty 1/4" Push Connect hose connections Includes Mounting Clip   In situations with high back pressure (like those with a pressurized storage tank used for drinking water), these pumps dramatically improve the efficiency of R.O. water production, reducing wastewater…

    $63.99

    pressure is a leading cause of poor RO system performance. A pressure gauge assures that proper pressure is being supplied. It will also make pressure drops apparent which can tell you that sediment and carbon blocks need to be changed.  Glycerin filled pressure gauges absorb vibration and pressure

    Starting at:
    $59.99

    …carbon blocks and membranes.    We recommend changing sediment filters when they are visibly dirty, or a drop in pressure is noticed.    Specifications: Cartridge Length - 20" Inside Diameter - 1" Max Recommended Flow Rate - 10 GPM Min Pressure Requirement - 25 PSI   Aquatrex Large Diameter Filters

    Starting at:
    $39.99

    …takes a few seconds. Just close the pressure adjustment valve all the way, screw the union nut onto the cylinder, connect your favorite solenoid, and then set your working pressure with the pressure adjustment knob. It is recommended to start at a pressure of 7.25 PSI (0.5 bar) for the best…

    $111.43

    …If your RO system has an auto shut off kit or you are planning on installing one the Aquatec PSW Pressure Switches (sold separately) is also required.   Benefits of maintaining higher water pressures Improved waste water ratio Improved membrane rejection performance Reduced DI resin consumption  …

    $109.99

    …seconds. Just close the pressure adjustment valve all the way, screw the union nut onto the cylinder, the solenoid and check valve with the included airline tubing, and then set your working pressure with the pressure adjustment knob. It is recommended to start at a pressure of 7.25 PSI (0.5 bar)…

    $210.00

    …system will have a pressure gauge, we offer a bracket that has a pre-punched hole for the pressure gauge to mount onto.    Two Models Available: Z-Style Triple 10" RO Canister Bracket With Pressure Gauge Hole Z-Style Triple 10" RO Canister Bracket (no additional hole for a pressure gauge)   What's…

    Starting at:
    $9.99

    Check valves only allow water to flow one direction. 1/8" Male NPT x 1/4" Push Connect elbow check valves are typically used on the product water output of RO membrane housings to protect from back pressure and allow auto shut off valves to operate correctly.

    $3.99

    …the drain (i.e. no electricity required), the Permeate Pump forces product water into the storage tank, reducing membrane back pressure and maximizing available feed pressure.   These pumps dramatically improve the efficiency of drinking water R.O. water production, reducing wastewater by up to 80%.…

    $59.99

    …blocks and membranes.    We recommend changing sediment filters when they are visibly dirty, or a drop in pressure is noticed.    Specifications: Cartridge Length - 9.875" Inside Diameter - 1" Max Recommended Flow Rate - 5 GPM Min Pressure Requirement - 25 PSI   Aquatrex Large Diameter Filters

    Starting at:
    $18.99

    …used for a multitude of different uses. From reactors to large air lines, if you need 3/8" tubing this is what we prefer to use for non-pressurized applications.  3/8" ID x 1/2" OD Clear Flexible Easy to work with   Specifications: Outside Diameter - 1/2" Inside Diameter - 3/8" Max Pressure - 45 PSI

    $1.19

    …Tunze to connect to the Tunze Osmolator - the water valve replaces the pump with an electrically operated solenoid. Use it to control the flow of water from a tube rather than pumping it from a container like gravity-fed auto top off system.   Max Water Pressure - 145 PSI (10 bar)   Item #: 8555.200

    $89.99

    …industry leading chlorine reduction making it the highest performance 5 micron carbon block for chlorine and VOC’s in our industry. Chlorine 15,000 @ 1 GPM* 5 µm (Micron) Nominal Filtration* High chemical adsorption* 30% more carbon than standard blocks VOC Reduction Exceptionally low pressure drop

    $219.99

    …If you require faster water production and have good water pressure this is one of the better options.BRS generally recommends the use of the 75 GPD DOW membranes because it offers 98% rejection at easier to obtain water pressures. The higher rejection will result in better quality water and…

    $59.99

    …Rate: 230 GPH Circulation Flow Rate: 1000 GPH Max Head Pressure: 4 Ft 10 Watts Inlet: fits 3/4" ID tube Outlet: fits 1/2 tube Pump Dimensions: 3.25" x 3.5" x 2" NOTE:This pump is not intended for use with a reactor or other back pressure situations as it will be significantly louder than in other…

    $27.99

    …acrylic can handle in most cases.  By placing a single sheet of Neoprene Foam in-between the tanks glass/acrylic and stand, that will dampen any pressure points to make a level and even surface for the tank to rest on.  1/8 inch thick Closed Cell Neoprene Foam Easily cuts with razor blade for a…

    Starting at:
    $32.99

    …balloon as pressure built up in the tubing until the crack pressure was overcome. When pressure builds in the tubing because of a high crp rating of the valve, this can often cause a larger release of CO2 than intended. Then it releases, builds up again, and continues this cycle of pressure buildup.…

    $19.99