Replacement Valve

SORT:
VIEW: 32/64
38 items found. Showing items 1 to 32 .

    Cepex Ball Valves are easily the best valves on the market, with their smooth action and long life of reliable function. We now carry replacement slip connections, allowing you to reuse, relocate, or reroute your current plumbing without having to worry about salvaging your current PVC connection…

    Starting at:
    $4.89

    …PVC Replaceable seals are made of long-wearing, chemical resistant Santoprene rubber.   Note: Requires 1/2" mounting hole. To shut off your waste water you will need an auto shut off valve and check valve. If you don’t have these please purchase the “Auto Shut Off Kit.”   Float Valve Installation…

    $14.99

    Replacement Effluent Valve Compatibility Chart Skimz Part Number Calcium Reactor Model BRS SKU CSF01 CM122, CM152, CM202, CM202H, CM93, CM113, CM153, RR153, RR124, RR154, and RR204 209755 CSF02 RR93, and RR113 209867

    Starting at:
    $10.79

    valve should be replaced to keep watertight seals throughout the valve. It only takes a few minutes to rebuild and replace the valve with new o-rings.    Available for the following size Cepex Ball Valves: 1/2" Cepex Ball Valves 3/4" Cepex Ball Valves 1" Cepex Ball Valves 1 1/4" Cepex Ball Valves 1…

    Starting at:
    $4.29

    Replacement check valve for Skimz Calcium reactors. Fits all models

    $10.79

    Use the Water Valve from Tunze to connect to the Tunze Osmolator - the water valve replaces the pump with an electrically operated solenoid. Use it to control the flow of water from a tube rather than pumping it from a container like gravity-fed auto top off system.   Max Water Pressure - 145 PSI…

    $91.37

    Replace the pump on your IceCap ATO with a Solenoid Valve Compatible with the IceCap ATO system. IceCap's ATO Solenoid Valve can work with a gravity fed auto top off reservoirs or just connect it directly to your RODI system. The solenoid valve will replace the pump that comes with the IceCap ATO…

    $23.00

    …outputs to prevent water overflowing the sump in the event of a power outage, pump failure or maintenance. These check valves feature true union fittings on each end for easy replacement and disassembly.   The golden rule of plumbing is that every job takes three trips to the store. While this can…

    Starting at:
    $23.99

    …PVC Replaceable seals are made of long-wearing, chemical resistant Santoprene rubber.   Note: Requires 1/2" mounting hole. To shut off your waste water you will need an auto shut off valve and check valve. If you don’t have these please purchase the “Auto Shut Off Kit.”   Float Valve Installation…

    $15.99

    …when the battery is starting to get low, it gives you an audible alert, and before the battery completely dies the solenoid valve will latch shut until the battery is replaced.    Possible Applications: RODI Systems Dishwashers Coffee Makers Refrigerators Water Coolers Icemakers Toilets Beverage…

    $53.00

    valve let you quickly control the flow of water through the Water Change System giving you precise control of the flow, and amount of water removed. Features: Metal connection to faucet Saves time No siphon needed or buckets to empty aquariums Easy to use design with control valve Replacement

    Starting at:
    $39.99

    …ability to hook directly up to a RODI solenoid to replace the pump they are equipped with out of the box. If you have upgraded to a larger system, or just simply don't have the room for an ATO storage container this may be the option for you. Replacing the stock pump with the Smart Solenoid will…

    $22.99

    …systems. Kit includes an 800ml/min Auto Flush Flow Restrictor. Requires working Auto Shut Off Valve to operate.   Installation Instructions: 1. Turn off your source water supply.  2. Locate and replace the current flow restrictor with the new Auto Flush Flow Restrictor. On all BRS RODI systems and…

    Starting at:
    $104.99

    …3:1 3:1 1.5:1 1.5:1 Rejection Rate 99% 98% 99% 98% Auto Shut Off Valve ✓ ✓ ✓ ✓ Flow Restrictor 550 ml/min 800 ml/min 550 ml/min 800 ml/min Canister Wrench ✓ ✓ ✓ ✓   Laundry Tub Connection Adapter ✓ ✓ ✓ ✓ Chrome Faucet Diverter Valve ✓ ✓ ✓ ✓ RO/DI Body Dimensions 16" x 6.25" x 15.5" 16" x 7" x 15.5"…

    Starting at:
    $149.99

    …IQ-Fill Water Run-Time Intelligence Mechanical Float Valve Audible Alarms No Apex Necessary Advanced Featured Unlocked When Paired With Apex Controllers   The ATK (Automatic Top-off Kit) is a simple, standalone, and complete solution for replacing water lost to evaporation. The new aquarium hobbyist…

    $199.95

    …standard pH, ORP, and salinity probes securely fitting in the probe holder, they can be easily removed within a few seconds for maintenance or replacement with the compression style fitting. The probe coupler will attach to 1/2" female NPT threads.   If you are one of the few reefers that wants…

    $19.99

    …within the sump with no moving parts. The optical sensor is very reliable, even in complete darkness, keeping a steady water and salinity level replacing any evaporated water with fresh water. The Micro ATO, like its predecessor, uses a magnetic mounting solution that works for tanks and sumps that…

    $134.99

    …RO/DI Features: Super efficient with DI consumption Includes BRS Pro resin Produce 0 TDS water Minimal wastewater Includes Float Valve and Inline Ball Valve Multiple source water connections Mur-lok Push Connect dual EPDM O-Ring fittings 10 Ft Each of 1/4" Blue, Red and Black Tubing Pre-installed…

    Starting at:
    $339.99

    …cartridge. Add 1 to 2 Tbsp of RODI water to the bottom of the reactor body making sure that it does not touch the CO2 media when the cartridge is replaced. Completely fill the refillable cartridge insert with your preferred CO2 absorbing media and place back into the reactor housing. Monitor your…

    Starting at:
    $129.99

    …cartridge. Add 1 to 2 Tbsp of RODI water to the bottom of the reactor body making sure that it does not touch the CO2 media when the cartridge is replaced. Completely fill the refillable cartridge insert with your preferred CO2 absorbing media and place back into the reactor housing. Monitor your…

    Starting at:
    $239.99

    …coated with mineral deposits and start to become cloudy. By replacing the quartz sleeve about once per year, and also the UV lamp, your UV sterilizer will work just like it did on day one. Most reefers will know it is time to replace the bulb and sleeve when algae starts to grow on the glass, rock,…

    $209.52

    …coated with mineral deposits and start to become cloudy. By replacing the quartz sleeve about once per year, and also the UV lamp, your UV sterilizer will work just like it did on day one. Most reefers will know it is time to replace the bulb and sleeve when algae starts to grow on the glass, rock,…

    $209.52

    …coated with mineral deposits and start to become cloudy. By replacing the quartz sleeve about once per year, and also the UV lamp, your UV sterilizer will work just like it did on day one. Most reefers will know it is time to replace the bulb and sleeve when algae starts to grow on the glass, rock,…

    $229.71

    …coated with mineral deposits and start to become cloudy. By replacing the quartz sleeve about once per year, and also the UV lamp, your UV sterilizer will work just like it did on day one. Most reefers will know it is time to replace the bulb and sleeve when algae starts to grow on the glass, rock,…

    $229.71

    …coated with mineral deposits and start to become cloudy. By replacing the quartz sleeve about once per year, and also the UV lamp, your UV sterilizer will work just like it did on day one. Most reefers will know it is time to replace the bulb and sleeve when algae starts to grow on the glass, rock,…

    $307.31

    …coated with mineral deposits and start to become cloudy. By replacing the quartz sleeve about once per year, and also the UV lamp, your UV sterilizer will work just like it did on day one. Most reefers will know it is time to replace the bulb and sleeve when algae starts to grow on the glass, rock,…

    $307.31

    …coated with mineral deposits and start to become cloudy. By replacing the quartz sleeve about once per year, and also the UV lamp, your UV sterilizer will work just like it did on day one. Most reefers will know it is time to replace the bulb and sleeve when algae starts to grow on the glass, rock,…

    $436.12

    …coated with mineral deposits and start to become cloudy. By replacing the quartz sleeve about once per year, and also the UV lamp, your UV sterilizer will work just like it did on day one. Most reefers will know it is time to replace the bulb and sleeve when algae starts to grow on the glass, rock,…

    $436.12

    …coated with mineral deposits and start to become cloudy. By replacing the quartz sleeve about once per year, and also the UV lamp, your UV sterilizer will work just like it did on day one. Most reefers will know it is time to replace the bulb and sleeve when algae starts to grow on the glass, rock,…

    $476.49

    …coated with mineral deposits and start to become cloudy. By replacing the quartz sleeve about once per year, and also the UV lamp, your UV sterilizer will work just like it did on day one. Most reefers will know it is time to replace the bulb and sleeve when algae starts to grow on the glass, rock,…

    $476.49

    …coated with mineral deposits and start to become cloudy. By replacing the quartz sleeve about once per year, and also the UV lamp, your UV sterilizer will work just like it did on day one. Most reefers will know it is time to replace the bulb and sleeve when algae starts to grow on the glass, rock,…

    $125.72

    …coated with mineral deposits and start to become cloudy. By replacing the quartz sleeve about once per year, and also the UV lamp, your UV sterilizer will work just like it did on day one. Most reefers will know it is time to replace the bulb and sleeve when algae starts to grow on the glass, rock,…

    $141.23