Reverse Osmosis Membrane

SORT:
VIEW: 32/64
63 items found. Showing items 1 to 32 .

    …the 75 GPD DOW membrane is hands down the best membrane for our hobby. Up to 99% rejection Dow membrane* - NSF certified Compatible with all 10" RO Membrane Housings. Be sure to change the flow restrictor if you change the flow of your membrane.   FILMTEC reverse osmosis membrane elements for home…

    $34.99

    …new membranes will have a slight coating on them to help preserve the membrane until it is ready for use.  It is recommended to discard all water that is produced by the new membrane for the first hour of operation.    For Product Data Sheet Click Here   DOW Filmtec 100 GPD TW30-1812-100HR Membrane

    $46.99

     Never worry about flushing your RODI systems membrane ever again! Membrane flushing is a maintenance task that commonly gets overlooked and forgotten about, but consistent flushing of your reverse osmosis membrane can dramatically improve its life and production rate. The Aquatec Auto Flush Flow…

    Starting at:
    $104.99

    …Gauge - Reverse Osmosis membranes require a particular amount of pressure to operate efficiently, and using a pressure gauge will help ensure your system is performing correctly. Pressure Gauges also work as a great indicator of when sediment or carbon blocks start to become clogged.  Membrane Flush…

    Starting at:
    $214.99

    Membrane housings are relatively standard across the industry, and the only wearable parts are the o-rings that seal the housing. If the o-rings are kept lubricated with proper lubricant, they will last years without any problems. However over time the o-rings will go bad and with slight variations,…

    $8.99

    …as fast as a standard 75 GPD or 100 GPD membrane while cutting the amount of wastewater in half. The BRS 150 GPD or 200 GPD Water Saver Upgrade Kit will increase the production of any BRS 75 GPD reverse osmosis system to 150 GPD or 100 GPD RO membrane up to 200 GPD without having to use any…

    Starting at:
    $59.99

    …GPD membrane features a 98% rejection rate at 65 PSI which makes it the most commonly used membrane when speed is the primary importance. If you require faster water production and have good water pressure this is one of the better options.BRS generally recommends the use of the 75 GPD DOW membranes

    $59.99

    …visually dirty or there is a noticeable drop in pressure. Change carbon blocks every 6-12 months depending on use. This kit does not include a membrane filter as they need replacement every three years or so, depending on water and set up.   Recommended Installation for this package* Stage One -…

    $25.99

    membrane. The higher your membranes rejection rate the fewer TDS your product water will contain resulting in longer lasting resin. The best way to keep the membrane rejection rate up is to monitor and change your prefilters appropriately as well as maintain at least 50psi going into the membrane.

    Starting at:
    $13.99

    …sure to have the appropriate flow restrictor for the membrane you have. If you decide to change your membrane to a higher or lower GPD membrane, you must also replace the flow restrictor to correspond with the membrane. All BRS Reverse Osmosis Systems have the appropriate flow restrictor installed.…

    Starting at:
    $7.99

    …and Pro Series Mixed Bed Cation resins for the ultimate Phosphate, Silica, and Carbon Dioxide elimination system! Add it to your current reverse osmosis system or upgrade your current deionization system and notice immediate results! Dual TDS Meter already installed Perfect for adding additional…

    $64.99

    …Resin Reverse osmosis systems can remove up to 99% of contaminants from your water, however, they can never remove 100% which is the overall goal for reef tank water. That is where deionization (DI) resin comes into play, by taking place as the last "filter" of a RODI system after the membrane. DI…

    Starting at:
    $14.99

    …GPD single membranes or 150 GPD Water Saver Systems 600 mL/min 700 mL/min 800 mL/min for 100 & 150 GPD single membranes or 200 GPD Water Saver Systems   The Aquatec Auto-Flush Flow Restrictor features: Reduction in waste water ratio Increase in the TDS rejection rate Extended membrane life 1/4" hose…

    Starting at:
    $54.99

    membrane and post DI stage. These three readings will notify you when it's time to change the RO membrane and DI resin.   The TRM-1 Triple Inline TDS Meter from HM Digital is one of the most essential reverse osmosis accessories. This tool uses electrode probes to monitor the TDS of your reverse

    $44.99

    …Total cation capacity:  1.9 meq/mL min (Na+ form) Total anion capacity:  1.25 meg/mL min (cl+ form)   Note: Membranes are not included in standard filter replacement kits. Membranes should be replaced as needed.   *Nominal Micron Rating for all above - 1 micron **2ppm free chlorine >90% reduction…

    $26.99

    …water, Matrix Filters are a great value option and will effectively prepare your water for filtration through the membrane and also scrub the water of any remaining TDS after the membrane with the included Nuclear Grade DI Resin. If your city uses chloramines, we do suggest using the BRS 6 Stage…

    $44.99

    …single membranes or 200 GPD Water Saver System   Reverse Osmosis membrane flush/flow restrictor valves increase the flow to the membrane by bypassing the flow restrictor when the valve is opened. This helps flush deposits and significantly increases the usable life of the RO membrane. The Membrane

    Starting at:
    $9.99

    …tanks to shut off an RO system. It utilizes the back pressure created by the float valve or pressurized tank to shut off the water supply to the membrane. Without an automatic shut off valve waste water would continue to run out after the float valve is activated or tank becomes full.   Auto Shut…

    $9.99

    …visually dirty or there is a noticeable drop in pressure. Change carbon blocks every 6-12 months depending on use. This kit does not include a membrane filter as they need replacement every three years or so, depending on water and set up.   Recommended Installation for this package* Stage One -…

    $35.99

    …It also includes the pressure switch so it will work with reverse osmosis units that are set-up to shut off automatically. ¼” Push Connect fittings. Benefits of maintaining higher water pressures Improved waste water ratio Improved membrane rejection performance Reduced DI resin consumption   The…

    $149.99

    Membrane housing clips are used to attach the membrane to the RO bracket as well as to attach additional membranes or filters to the original membrane. 2.5" is the standard membrane size. Typically use 2" clips to attach smaller inline carbon filters. 2.5" Membrane Housing Clip 2.5" x 2 Membrane

    Starting at:
    $0.99

    …for reverse osmosis systems. 10” Standard RO Canister Screw - #10-12 x 3/4" - Standard screws are used for attaching the canisters to a metal bracket. 10” Long RO Canister Screw  - #10-12 x 1" - The long screw is required for the few holes where additional brackets or clips (ex. membrane housing…

    Starting at:
    $0.49

    …and other contaminants from entering your water. Deionization resin is normally used after a reverse osmosis membrane but can be used on its own. We highly recommend using DI resin after a RO membrane since it will greatly increase the active lifespan of the resin. Purity of water is normally read…

    $38.00

    …Gauge - Reverse Osmosis membranes require a particular amount of pressure to operate efficiently, and using a pressure gauge will help ensure your system is performing correctly. Pressure Gauges also work as a great indicator of when sediment or carbon blocks start to become clogged.  Membrane Flush…

    Starting at:
    $264.99

    …Tee's.   Flow Membrane Flush Valve Reverse Osmosis membrane flush/flow restrictor valves increase the flow to the membrane by bypassing the flow restrictor when the valve is opened. This helps flush deposits and significantly increases the usable life of the RO membrane. The Membrane Flush/Flow…

    Starting at:
    $59.99

    …Gauge - Reverse Osmosis membranes require a particular amount of pressure to operate efficiently, and using a pressure gauge will help ensure your system is performing correctly. Pressure Gauges also work as a great indicator of when sediment or carbon blocks start to become clogged.  Membrane Flush…

    Starting at:
    $339.99

    …from HM Digital measures the TDS of a single water line. This is a great tool to monitor the TDS of your reverse osmosis system. Common monitoring locations include pre-system, post membrane or post DI stage. This unit features a digital display and comes with a 1/4" GA Murdock Quick Connect Tee…

    $24.99

    …Gauge - Reverse Osmosis membranes require a particular amount of pressure to operate efficiently, and using a pressure gauge will help ensure your system is performing correctly. Pressure Gauges also work as a great indicator of when sediment or carbon blocks start to become clogged.  Membrane Flush…

    Starting at:
    $289.99

    …the tube.    Blue RO Tubing is commonly used to distinguish filtered water from raw source water. On most reverse osmosis systems the blue tubing will start immediately after the membrane.   Make sure to pick up an RO Tubing Cutter for easy and clean cuts every time!   What's Included? 1x 500 Foot…

    $99.99

    …fittings.    Blue RO Tubing is commonly used to distinguish filtered water from raw source water. On most reverse osmosis systems the blue tubing will start immediately after the membrane.   Six Sizes Available: Each length will be a continuous piece. If you need a single piece longer than what…

    Starting at:
    $1.99

    Check valves only allow water to flow one direction. 1/8" Male NPT x 1/4" Push Connect elbow check valves are typically used on the product water output of RO membrane housings to protect from back pressure and allow auto shut off valves to operate correctly.

    $3.99

    …Commercial Dual Inline TDS Meter from HM Digital has a stronger water resistant casing than the DM-1. This tool monitors the TDS of your reverse osmosis system in two places and lets you know exactly how the system is performing. DM-2 features include: Especially designed for commercial/industrial…

    $45.99