Ro

SORT:
VIEW: 32/64
313 items found. Showing items 1 to 32 .

    …Carbon Block Filter 75 GPD Dow Filmtec Membrane   Parts Bag Includes: 1/4" push connect drain saddle clamp to plumb the waste water line from the RO system to a sink's drain pipe Mur-lok push connect Inline ball valve for easy on/off Filter wrench to tighten and loosen canisters Chrome faucet…

    $149.99

    …16" x 7" x 18" 16" x 7" x 18" Recommended Minimum Water Pressure  50-80 psi 50-80 psi 65-80 psi 65-80 psi Tubing Size 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing Water pressure can be increased by adding a booster pump before your RO/DI system. Low pressure may cause the RODI system…

    Starting at:
    $149.99

    …The BRS 150 GPD or 200 GPD Water Saver Upgrade Kit will increase the production of any BRS 75 GPD reverse osmosis system to 150 GPD or 100 GPD RO membrane up to 200 GPD without having to use any additional water. With the installation of this kit water production will increase from approximately…

    Starting at:
    $59.99

    Why Does BRS Recommend This? If you have hard to remove contaminants, your city uses chloramines, or you just are not sure what is in your water the BRS 7 Stage Pro Plus RO/DI system is the perfect solution to make ultra-pure water for your saltwater aquarium. The Triple DI Saver system uses…

    Starting at:
    $339.99

    BRS 4 Stage Plus RODI Systems are perfect for reefers who have city water treated with chlorine, or reasonably clean well water. Self-contained on a single bracket making them ideal for tight spaces or where a non-permanent connection may be required. Every BRS RODI system can be installed within…

    Starting at:
    $214.99

    BRS 5 Stage Drinking Water RO System Instructions   The BRS 5 Stage RO Drinking Water Reverse Osmosis System includes all the essential features necessary to start making pure RO water for your saltwater tank as well as supply drinking water at 75 gallons per day.   Drinking Water Features: 3.2…

    Starting at:
    $239.99

    BRS 6 Stage RO/DI Systems are capable of handling almost any type of water your house may have and polishing it down to 0 TDS. Each system comes with dual Universal Carbon Blocks and Dual Color Changing DI stages, making it the perfect RO/DI system for almost any type of city water treatment…

    Starting at:
    $289.99

    …to garden hose or laundry tub Mur-lok EZ angle stop adapter to make a semi-permanent connection to household water supply under sink 3/8" Black RO tubing   Standard Features: Automatic shut-off valve Mur-lok Push Connect dual EPDM O-Ring fittings 10 Ft Each of Blue, Red and Black Tubing BRS…

    Starting at:
    $269.99

    This kit works with all BRS 4 Stage RO Only Systems along with most other RO systems that use 10" canisters. This kit includes: Purtrex 5 Micron Sediment Filter MATRIKX CTO 5 Micron Carbon Block MATRIKX CTO 1 Micron Carbon Block We recommend changing sediment filters when they become visually dirty…

    $21.99

    …Choose your own resin Stop throwing away good resin Triple TDS Meter already installed Perfect for adding additional DI stages to your RO system Includes 5 Feet of RO Tubing ¼" Push Connect Fittings   Why Single Bed Resins? Using single bed resins will give you the ability to use 100% of the resin…

    $89.99

    Why does BRS recommend this? If you hook up your RODI system and have low pressure or an issue with the amount of product water you are producing, there is a good chance are a booster pump will solve the issue.  The Booster pump kit will come with everything needed to get it hooked up to your RODI…

    $149.99

    …GE, KX Technologies, and Pentek. The 10” filter size is the industry standard and will fit our systems as well as virtually every brand of RO system that uses similar looking carbon blocks.  Most of the filters included in our kits are NSF Certified or WQA Gold Seal Certified and Manufactured…

    $35.99

    …you wish to solve, it can be very beneficial to run multiple of the same type of filter with different micron sizes.   Accepts most 2.5" x 10" RO Filters   Filter Recommendations Chloramines Removal - BRS Universal Carbon Block 1 Micron (we suggest two Universal filters for Chloramines removal)…

    $27.99

    …are used to attach RO systems to most kitchen sink faucets. They allow RO units to remain connected to the sink. Simply turn the diverter valve lever to operate the RO unit and push back to use the sink faucet. This item is designed for use with our saltwater aquarium line of RO systems. Diverter…

    $10.99

    …to your RODI.     What's Included? 1x FMM Fluid Monitoring Module 2x Optical Water Level Sensors 1x Float Valve 1x 90° Tube Fitting 1x PMUPv2 1x 4 Meters Orange RO Tubing 1x 3/8" to 1/4" Push Connect Adapter Fitting 1x 1/4" Push Connect Siphon Break 1x Set Screw for Non-Float Valve Applications    

    $199.95

    We carry a wide variety of reverse osmosis canisters, and depending on your system or reactor we most likely have the canister to fit your needs. The most common RODI systems along with the BRS systems use the 10" Canister with 1/4" ports. The standard and dual BRS Reactors use the same 10" canister…

    Starting at:
    $16.99

    …the membrane by bypassing the flow restrictor when the valve is opened. This helps flush deposits and significantly increases the usable life of the RO membrane. The Membrane Flush/Flow restrictor valve is an all in one flow restrictor equipped with a flush valve for easy worry free use. Keeping the…

    Starting at:
    $9.99

    Most sediment filters in aquarium RO systems are inexpensive surface filters that quickly lose their effectiveness when the surface becomes clogged. Purtrex Depth Sediment filters are true graded density filters that capture larger particles at the surface and smaller particles towards the center.…

    Starting at:
    $2.99

    …✓ RO Body Dimensions 16" x 6.25" x 15.5" 16" x 7" x 15.5" 16" x 7" x 18" 16" x 7" x 18" DI Canister Dimensions 6" x 5.5" x 14" 6" x 5.5" x 14" 6" x 5.5" x 14" 6" x 5.5" x 14" Recommended Minimum Water Pressure  50-80 psi 50-80 psi 65-80 psi 65-80 psi Tubing Size 1/4" RO Tubing 1/4" RO Tubing 1/4" RO

    Starting at:
    $199.99

    Why does BRS recommend this? Push connect fittings need the tubing to go in straight or a leak may be possible.  Tube clips keep the collet on the fitting locked out to hold the tube into the fitting to help prevent leaks.  Anytime you have a tight bend going into a fitting we highly recommend tube…

    Starting at:
    $0.19

    Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality American made fittings are constructed with FDA approved materials. Straight Union - Push Connect x Push Connect Polypropylene construction NSF Standard 58 Certified

    Starting at:
    $2.99

    …Aquatec 8800 Power Supply required for installtion.   An Auto-Flush Flow Restrictor will assist the RO membrane to perform with maximum efficiency for longer time periods. At BRS, we recommend that an RO system be flushed on a regular basis.  The use of this auto-flush flow restrictor can reduce the…

    Starting at:
    $54.99

    U style triple bracket for standard 10" x 2.5" RO canisters.   Triple U-Style Brackets are perfect for replacing your current RO/DI bracket or if you are building a new RO/DI system on your own. Our brackets are white and include multiple slots for different mounting styles and orientations. The…

    $9.99

    Triple bracket for 20" x 2.5" RO canisters.

    $16.99

    Dow 111 O-ring lubricant is used to prevent the O-rings in RO canisters from binding up when tightened and provides a tight seal.

    Starting at:
    $1.99

    …BulkReefSupply.com suggests installing the dual TDS meter post membrane and post DI stage. These two readings will notify you when it's time to change the RO membrane and DI resin. This unit features a digital display and comes with two 1/4" GA Murdock Quick Connect Tee's with double o-rings to…

    $45.99

    …gauge comes assembled with 1/4" quick connect fittings for quick easy installation in-line before the RO Membrane. This item is designed for use with our saltwater aquarium line of RO systems.   Dual Inline TDS Meter: The DM-1 Dual Inline TDS Meter from HM Digital is one of the most important…

    Starting at:
    $59.99

    High-Performance Biofilter Media for Nano Tanks! Inert and chemically stable, MarinePure Gems are a great addition to any aquarium that needs more biofiltration. Bacteria prefer to grow on surfaces, and by adding more surface area in your aquarium, you will give more space for beneficial bacteria to…

    $13.99

    …Including GE, KX Technologies and Pentek. The 10” filter size is the industry standard and will fit our systems as well as virtually every brand of RO system that uses similar looking carbon blocks.  Most of the filters included in our kits are made in the USA, NSF Certified or WQA Gold Seal…

    $99.99

    RO Canisters can become very tight over time and changing filters can be a real challenge if you do not have the correct filter wrench. These are very handy to have around and are made of strong plastic to last just as long as your Reverse Osmosis system.    Wrench for 10" 2.5" Canisters - This is…

    Starting at:
    $3.99

    …water line.  Standard Float Valve Adjustable Float Valve   Auto shut off valves (ASOV) are great for reverse osmosis systems and will allow your RO system to automatically turn on and off based on the activation of a float valve. ASOVs do require a minimum of 40 PSI to operate correctly and can…

    $24.99

     Never worry about flushing your RODI systems membrane ever again! Membrane flushing is a maintenance task that commonly gets overlooked and forgotten about, but consistent flushing of your reverse osmosis membrane can dramatically improve its life and production rate. The Aquatec Auto Flush Flow…

    Starting at:
    $104.99