Ro Di Water Filters

SORT:
VIEW: 32/64
70 items found. Showing items 33 to 64 .

    …formulated for industry leading chlorine and VOC reduction. The result is a filter that can treat almost double the volume of water than any other 5 micron carbon block in our industry which leads to saving money on filter changes in the long run. Chlorine 15,000 @ 1 GPM* 5 µm (Micron) Nominal…

    $10.99

    …Preinstalled Metering Locations Sensor 1 - Incoming water to DI stage 1 Sensor 2 - Final output from DI stage 2   Dimensions - 10" x 6.25" x 14"   What's Included? 1x Dual Deionization Canister Assembly 1x HM Digital DM-1 Dual TDS Meter 5 Feet Blue RO Tubing   What's Needed? Two Single Cartridge…

    $64.99

    water for your aquarium and help eliminate any possible water quality issues. You may or may not know that there are multiple types of DI resin available from mixed bed to single bed resins that you can use depending on what the specific goal is for your water and what is in the water after the RO

    Starting at:
    $14.99

    …with an Auto Shut Off Valve - The solenoid valve can be placed anywhere after your DI and before the water enters your reservoir. This method will let you use your RODI system like normal if you split the RO or DI water off to any other reservoirs while allowing the XP RO/DI Flood Guardian to work…

    $69.99

    …1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing Water pressure can be increased by adding a booster pump before your RO/DI system. Low pressure may cause the RODI system to produce excessive waste water. Pressure over 90 PSI may cause damage to the RO/DI units filters and components.…

    Starting at:
    $149.99

    …16" x 7" x 18" 16" x 7" x 18" DI Canister Dimensions 6" x 5.5" x 14" 6" x 5.5" x 14" 6" x 5.5" x 14" 6" x 5.5" x 14" Recommended Minimum Water Pressure  50-80 psi 50-80 psi 65-80 psi 65-80 psi Tubing Size 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing Water pressure can be increased by…

    Starting at:
    $199.99

    …of DI resin. Get maximum output and the best quality filtered water from your RO system!   The Smart Buddie is designed to work with most RO and RO/DI units rated between 50 and 100 gallons per day. The Smart Buddie booster pump is quiet, easy to install, and can significantly increase water

    $129.99

    …upgrade kit with everything you should need including filters and DI resin.  One of the main points of focus when it comes to RODI systems is chlorine, and chloramines.  More and more cities are starting to use chloramines to treat their water because it lasts longer than standard chlorine, which a…

    $99.99

    …RO/DI Features: Produce 0 TDS water Minimal waste water Dual DI Stages Includes Inline Ball Valve Multiple source water connections Mur-lok Push Connect dual EPDM O-Ring fittings 10 Ft Each of 1/4" Blue, Red and Black Tubing Pre-installed NSF Certified Filters   All Bulk Reef Supply RO/DI Systems…

    Starting at:
    $289.99

    …Stage 150 GPD Water Saver Premium Plus RO/DI System5 Stage 200 GPD Water Saver Premium Plus RO/DI System Gallons Per Day 75 100 150 200 Sediment Filter GE ROSave.Z 1 Micron Depth Sediment Filter GE ROSave.Z 1 Micron Depth Sediment Filter GE ROSave.Z 1 Micron Depth Sediment Filter GE ROSave.Z 1…

    Starting at:
    $264.99

    …Deionization Resin Single Mixed Bed DI Stage with Refillable Cartridge Single Mixed Bed DI Stage with Refillable Cartridge Single Mixed Bed DI Stage with Refillable Cartridge Single Mixed Bed DI Stage with Refillable Cartridge Waste to Product Water Ratio 3:1 3:1 1.5:1 1.5:1 Rejection Rate…

    Starting at:
    $214.99

    …make ultra-pure water for your saltwater aquarium. The Triple DI Saver system uses separate cation and anion beds of resin and is backed up by a mixed bed of resin for final polishing. Using the resin in a single bed form allows for greater efficiency, letting you filter more water for less money.…

    Starting at:
    $339.99

    …Carbon Block Filters with 30% more carbon than standard blocks, GE Purtrex Depth Sediment Filters, American made DOW membranes and Omnipure filters. Dimensions - 16" x 6.25" x 17.5" (RO bracket) / 6" x 5" x 13" (DI bracket)   Recommended Conditions: Minimum Water Pressure - 50 PSI Max Water Pressure…

    Starting at:
    $269.99

    …5 Feet of RO Tubing ¼" Push Connect Fittings   Add deionization stages to your current RO system or upgrade your RO/DI system. The HM Digital DM-1 Dual TDS Meter lets you see the quality of water you are producing at multiple points throughout the DI Stages.    All of our RO and DI systems use…

    $99.99

    water will be available on tap for immediate drinking water. RO/DI unit sold separately.    Kit includes: 3.2 gallon pressurized tank RO tank valve Silver faucet Faucet adaptor Tee for between faucet and pressurized tank Ball valve for turning on and off DI water Check valve for insuring that water

    $99.99

    …5 Feet of RO Tubing ¼" Push Connect Fittings   Add deionization stages to your current RO system or upgrade your RO/DI system. The HM Digital DM-1 Dual TDS Meter lets you see the quality of water you are producing at multiple points throughout the DI Stages.    All of our RO and DI systems use…

    $64.99

    …Chlorine.  Water Treatment facilities can change their treatment process without notice and usually change the amounts of disinfectants used depending on the season.  With simple low cost, quick, and easy to use test strips that give reliable readings, every RODI system that filters city water

    $15.99

    …At a 3:1 waste to product water ratio this filter will produce almost 19,000 gallons of RO water. Chloramine is different than Chlorine and is used in 10% of U.S. water supplies. Standard RO filters will not remove chloramines from the water. If your household water supply contains chloramines…

    $269.99

    …of water from your RO membrane will always be high, this is commonly referred to as TDS creep. Diverting the first few minutes of water down the drain can often greatly reduce DI resin consumption. Maintain low levels of carbon dioxide in your water supply.  Excess carbon dioxide will deplete DI

    Starting at:
    $11.99

    …of water from your RO membrane will always be high, this is commonly referred to as TDS creep. Diverting the first few minutes of water down the drain can often greatly reduce DI resin consumption. Maintain low levels of carbon dioxide in your water supply. Excess carbon dioxide will deplete DI

    $23.99

    …of water from your RO membrane will always be high, this is commonly referred to as TDS creep. Diverting the first few minutes of water down the drain can often greatly reduce DI resin consumption. Maintain low levels of carbon dioxide in your water supply.  Excess carbon dioxide will deplete DI

    Starting at:
    $13.99

    waters systems use chloramines to process water. Standard RO filters will not treat chloramines properly. If your water supply contains chloramines and are in need of a high output application the Pentek CRFC20-BB ChlorPlus Radial Flow carbon block is ideal. To find out what's in your water contact…

    $159.99

    …for performance and filter quality.  By using a dual TDS meter it will allow you to see your TDS readings in two places.  We will usually suggest putting one probe before the DI stage and one after the DI stage to show what your RO is producing for water quality and then how your DI is performing by…

    $29.99

    water pressures. The higher rejection will result in better quality water and lower DI resin consumption. Flow and rejection rates are based on the following: 550ppm soften water 65 PSI 77 degree water 15% Permeate Recovery Data taken after 30 minutes of operation It is very important that the water

    $59.99

    …& Odor Reduction Filter!  Matrikx Pb1 Carbon Blocks are perfect for residential or commercial water treatment systems. Providing excellent removal of lead and cysts, the 0.5 micron carbon block also performs very well at chlorine odor, taste, and VOC removal from water. For the best results…

    Starting at:
    $16.99

    …for performance and filter quality.  If you have a single or dual DI stage we highly recommend a triple TDS meter as it will allow you to see your TDS readings in three places.  We will usually suggest installing the triple TDS meter post source water, post membrane and post DI stage. These three…

    $44.99

    …system is performing. BulkReefSupply.com suggests installing the dual TDS meter post membrane and post DI stage. These two readings will notify you when it's time to change the RO membrane and DI resin. This unit features a digital display and comes with two 1/4" John Guest Quick Connect Tee's.  …

    Starting at:
    $59.99

    …installation on the metal frame common on most RO and RO/DI systems. This allows for readings at two locations in the system, such as after the RO membrane and after the DI resin stage, which is where water quality will most often change with filter performance.   The Titanium series of TDS meters…

    $33.99

    …on the metal frame common on most RO and RO/DI systems. This allows for readings at three locations in the system, such as the source line feeding the system, after the RO membrane and finally after the DI resin stage, allowing for monitoring at all major water quality locations.   The Titanium…

    $44.99

    …rejection Dow membrane* - NSF certified Compatible with all 10" RO Membrane Housings. Be sure to change the flow restrictor if you change the flow of your membrane.   FILMTEC reverse osmosis membrane elements for home drinking water are the industry's most reliable. Advanced membrane technology and…

    $34.99

    …you require slightly faster water production and have good water pressure this is one of the better options.   TIP -Brand new membranes will have a slight coating on them to help preserve the membrane until it is ready for use.  It is recommended to discard all water that is produced by the new…

    $46.99

    water, but it can also clue you in to when it's time to replace filter media. The Titanium One model features a display with the probe built-in, for simple installation on any 1/4" RO lines to provide quick readings at the spot of installation. This could be great for installing near the water

    $24.99