Ro Fittings

SORT:
VIEW: 32/64
126 items found. Showing items 1 to 32 .

    Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality American made fittings are constructed with FDA approved materials. We assemble our Reverse Osmosis units and Media Reactors virtually exclusively with Mur-lok fittings.

    $2.99

    We believe GA Murdock Mur-lok fittings to be the best so strongly that we use them virtually exclusively on each of our BRS reverse osmosis systems and BRS media reactors.

    Starting at:
    $2.99

    We believe GA Murdock Mur-lok fittings to be the best so strongly that we use them virtually exclusively on each of our BRS reverse osmosis systems and BRS media reactors.

    Starting at:
    $2.99

    We believe GA Murdock Mur-lok fittings to be the best so strongly that we use them virtually exclusively on each of our BulkReefSupply.com reverse osmosis and BRS media reactors.

    $2.99

    Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality American made fittings are constructed with FDA approved materials. Push Connect x Push Connect Polypropylene construction Dual EPDM O-rings NSF Standard 58 Certified…

    Starting at:
    $2.99

    …BRS recommend this? Push connect fittings need the tubing to go in straight or a leak may be possible.  Tube clips keep the collet on the fitting locked out to hold the tube into the fitting to help prevent leaks.  Anytime you have a tight bend going into a fitting we highly recommend tube clips for…

    Starting at:
    $0.19

    …up caused from your holding container becoming full. Most often triggered with a float valve Your system must have a working auto shut off kit for this switch to work properly. ¼” Push Connect fittings Preset at 40 PSI Adjustable (30-60) PSI "trigger point" for application specific shut off pressure

    $19.99

    We carry a wide variety of reverse osmosis canisters, and depending on your system or reactor we most likely have the canister to fit your needs. The most common RODI systems along with the BRS systems use the 10" Canister with 1/4" ports. The standard and dual BRS Reactors use the same 10" canister…

    Starting at:
    $16.99

    …below. This means you could put your RO water storage in your basement or downstairs in a utility room and it could still pump it up to the tank. It also has a vertically oriented design with a bottom intake and top output that is perfect for use in jugs or other RO containers. Just drop it in!  …

    $39.95

    …need to replace the CO2 media. Most CO2 absorbing media will have a color changing indicator to let you visually see when it is depleted.   What's Included? CO2 Reactor with 3/8” barbed fittings 6’ of tubing 10” refillable cartridge   CO2 absorption media sold separately   CO2 Scrubber Installation

    $35.99

    Three way ball valve with John Guest 1/4" push connect fitting. John Guest Material: PVC, EPDM Dimensions: 2-3/8" x 2-11/16" Max PSI:125

    $19.99

    The FM-2 RO Filter Monitor with Volumizer tracks up to five filter stages at once by time and volume. The monitor allows you to create filter change points at each stage at an individual point in the future or at a specific water volume. When the preset points are reached the FM-2 will alert you…

    $39.99

    We believe GA Murdock Mur-lok fittings to be the best so strongly that we use them virtually exclusively on each of our BRS reverse osmosis systems and BRS media reactors.

    Starting at:
    $1.19

    Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality American made fittings are constructed with FDA approved materials. We assemble our Reverse Osmosis units and Media Reactors virtually exclusively with Mur-lok fittings.

    $2.99

    …other uses.   Mur-Lok EZ Faucet Adapter 3/8" 1/2" Male Thread x 1/2" Female Thread Fits 3/8" RO tubing Polypropylene construction NSF Standard 58 Certified   Mur-Lok EZ Faucet Adapter 1/4" 1/2" Male Thread x 1/2" Female Thread Fits 1/4" RO tubing Polypropylene construction NSF Standard 58 Certified

    Starting at:
    $5.99

    We believe GA Murdock Mur-lok fittings to be the best so strongly that we use them virtually exclusively on each of our BRS reverse osmosis systems and BRS media reactors.

    Starting at:
    $2.49

    …O-rings they will give you a lifetime of leak free operation. Mur-lok RO fittings are the only reverse osmosis fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality American made fittings are constructed with FDA approved materials. Turns off water flow…

    Starting at:
    $6.49

    ¼" push connect bulkhead tank adapter. Note: These come with a plastic nut and  do not come with a gasket.  They are intended for dry applications such as running a tube through a tank stand, etc.

    $3.99

    Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality American made fittings are constructed with FDA approved materials. Straight Union - Push Connect x Push Connect Polypropylene construction NSF Standard 58 Certified

    Starting at:
    $2.99

    …that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings.    Blue RO Tubing is commonly used to distinguish filtered water from raw source water. On most reverse osmosis systems the blue tubing will start…

    Starting at:
    $1.99

    …having a simple leak detector on your RODI system is a great insurance policy against floods.  The Flow-lok Leak Detectors have 1/4" push connect fittings that work with all of the BRS RODI systems.  With a highly absorbent replaceable Leak Detector Pad when water is detected it will expand and trip…

    $19.99

    …requires the least amount of flow to tumble. Good for reactors. High Capacity GFO is twice as dense as Granular GFO, so twice as much material will fit into a reactor. It's extremely hard and has less dust to begin with. Fewer fines will be created during use and transportation. By volume, High…

    Starting at:
    $46.99

    Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality American made fittings are constructed with FDA approved materials. Polypropylene construction NSF Standard 58 Certified Sizes Available: Tee Union 1/4" Push Connect x…

    Starting at:
    $3.49

    …slides into standard push connect fittings. Barb side is designed for flexible tubing like nylon or clear pvc. Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality American made fittings are constructed with FDA approved…

    Starting at:
    $1.49

    …outside diameter of the tubing and will work with all 1/4" Push-Connect fittings.    Black Tubing is commonly used for wastewater lines with reverse osmosis systems and is commonly found coming out of the waste-water fitting on the membrane housing.   Six Sizes Available: Each length will be a…

    Starting at:
    $1.99

    RO Canisters can become very tight over time and changing filters can be a real challenge if you do not have the correct filter wrench. These are very handy to have around and are made of strong plastic to last just as long as your Reverse Osmosis system.    Wrench for 10" 2.5" Canisters - This is…

    Starting at:
    $3.99

    …features necessary to start making pure RO water for your saltwater tank as well as supply drinking water at 75 gallons per day.   Drinking Water Features: 3.2 gallon pressurized water tank Air gap water faucet All necessary drinking water fittings   5 Stages of Filtration: Purtrex 5 Micron…

    Starting at:
    $239.99

    …Just connect standard 1/4" RO tubing to the push-connect fittings included with the pump and plug it into the ATO controller and you are ready to go!  Plug & Play Works with RODI Systems Perfect for Gravity Fed Reservoirs Reliable & Safe 1/4" Push Connect Fittings   Note: We highly suggest adding…

    $23.00

    …cartridges with easy to use push connect fittings. They are most commonly used for the following: Carbon block is used as a post RO taste filter for drinking water systems Great for low volume applications. Replacement filters for BRS 3 Stage Space Saver RO System (legacy model)   Omnipure Inline…

    $14.99

    …cartridges with easy to use push connect fittings. They are most commonly used for the following: Great for low volume applications. Replacement filters for BRS 3 Stage Space Saver RO System (legacy model) Sediment filter is sometimes used as a prefilter on RO booster pump installations   Omnipure…

    $16.99

    …also makes a loud beeping noise when the sensor detects moisture 3/8" FNPT (ID) Threads or 1/2" BSP Threads (OD) Can be adapted to push-connect fittings Handles up to 5 GPM Low battery alert Fail-safe low power auto-off High frequency alarm Mesh pre-filter The Leak Block Sensor from HM Digital…

    $53.00

    …(NC), solenoid valve has push-fit tubing input and outputs designed for standard 1/4″ tubing. The electrical connection on this solenoid valve fits the DC24 accessory ports found on the FMM, 1Link, and Energy Bar 832 products. Common uses include safety stops for RODI systems, CO2 systems on…

    $29.95