Ro Tubing

SORT:
VIEW: 32/64
99 items found. Showing items 1 to 32 .

    Polyethylene Tubing for Reverse Osmosis Systems Compatible with all Bulk Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings.    Blue RO Tubing is…

    Starting at:
    $1.99

    …100 Foot   Make sure to pick up an RO Tubing Cutter for a perfect cut every time!   Made in the USA, Mur-lok Linear Low-Density Polyethylene (LLDPE) tubing is designed for use with all Mur-lok and John Guest push connect fittings. Mur-lok polyethylene tubing offers excellent pressure and temperature…

    Starting at:
    $1.99

    Polyethylene Tubing for Reverse Osmosis Systems Compatible with all Bulk Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings.    Red RO Tubing is used on…

    Starting at:
    $1.99

    The Mur-lok LLDPE Tubing is NSF 58 Component Certified. The products were put through rigorous structural and material testing to help ensure they meet the standards for drinking water. This certification also ensures that Mur-lok tubing can be easily incorporated into any NSF certified drinking…

    Starting at:
    $0.59

    …that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings.    Natural Clear coloration is a semi-translucent white tubing. It allows you to slightly see through the tube but is not 100% clear.  It is great…

    Starting at:
    $2.99

    …x 15.5" 16" x 7" x 18" 16" x 7" x 18" Recommended Minimum Water Pressure  50-80 psi 50-80 psi 65-80 psi 65-80 psi Tubing Size 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing Water pressure can be increased by adding a booster pump before your RO/DI system. Low pressure may cause the RODI…

    Starting at:
    $149.99

    Standard 1/2" (OD) tube for RO systems and BRS reactors   Made in the USA, Mur-lok Linear Low-Density Polyethylene (LLDPE) tubing is designed for use with all Mur-lok and John Guest push connect fittings. Mur-lok polyethylene tubing offers excellent pressure and temperature ratings and has…

    Starting at:
    $0.89

    …is super simple, just place the properly sized shoe around the tubing and push it down into the fitting, depressing the collet. Then while you are pushing the collet into the fitting, pull the tubing out of the fitting and you are done!   What's Included? 1x Mur-Lok Push Connect Tubing Release Tool

    $3.49

    …polyethylene RO tubing, but can also be used with some types of dosing pump tubing as well. Each bracket can be individually mounted with the included mounting screws or with alternative methods like double sided tape and other adhesives. Mounts In Seconds Can Hold up to 4 Tubes Compatible with…

    Starting at:
    $5.99

    …Neat and Easy To Use Niche3D's Mur-Lok Elbow Union Fitting Mounting Clips are the perfect accessory for anyone that wants to keep their 1/4" RO Tubing looking clean. Each fitting will hold a single Mur-Lok Elbow Push-Connect Union and can be securely mounted to a wall or another rigid surface.…

    $4.99

    …valves are some of the highest quality ball valves for push connect style tubing on the market.  With high quality parts, smoother operation, and dual O-rings they will give you a lifetime of leak free operation. Mur-lok RO fittings are the only reverse osmosis fittings that feature dual EPDM…

    Starting at:
    $6.49

    We believe GA Murdock Mur-lok fittings to be the best so strongly that we use them virtually exclusively on each of our BulkReefSupply.com reverse osmosis and BRS media reactors.

    $3.49

    ¼" push connect bulkhead tank adapter. Note: These come with a plastic nut and  do not come with a gasket.  They are intended for dry applications such as running a tube through a tank stand, etc.

    $3.99

    …filter.   Keep sediment out of your Aquatec Booster pump with the DMFit Filter Strainer. 100 Mesh (150 Micron) Compatible with standard-sized tubing Available in 2 Sizes: 3/8" x 3/8" or 1/4" x 1/4" Max Operating Pressure: 170psi Compatible with 1⁄4" Aquatec 8800 Booster Pump & 3⁄8" Aquatec 8800…

    Starting at:
    $8.99

    …input on the membrane. After the membrane the color of the tubing will usually change to blue to designate product water, and black to designate waste-water.   Make sure to pick up an RO Tubing Cutter for easy and clean cuts every time!   What's Included? 1x 500 Foot Spool Red Polyethylene RO Tubing

    $99.99

    …in sink drain pipe close to the sink Stick included gasket around hole (remove die cut circle from center if needed Position clamp on pipe and fasten with included screws Push in tubing and check for leaks 1/4" hole needed for 1/4" drain saddle clamp 3/8" hole needed for 3/8" drain saddle clamp  

    Starting at:
    $4.99

    …⅜" Male Thread x ⅜" Female Thread ⅜" Quick Connect Ball Valve for ⅜" RO tubing Polypropylene construction NSF Standard 58 Certified Mur-lok EZ Angle Stop Adapter Kit ¼" ⅜" Male Thread x ⅜"Female Thread ¼" Quick Connect Ball Valve for ¼" RO tubing Polypropylene construction NSF Standard 58 Certified

    Starting at:
    $13.99

    …other containers. Installation is as easy as drilling a small hole in the container, sliding the float in and attaching using the included nut. 1/4" tubing inlet and free flow outlet .093 orifice Estimated flow rate of 1.5 GPM at 40 PSI Tested to 100 PSI Approximate diameter is 1.4" Flange to float…

    $14.99

    …results can vary.   Directions: Connect the included 3/8" tubing to your protein skimmer's air intake and the output side of the reactor. It is usually easiest to remove your skimmer's silencer and directly attach the CO2 Scrubber tubing your pumps venturi. Unscrew the body from the head of the…

    Starting at:
    $239.99

    …recommend this? RO Tube Cutters are one of the secrets to working with RO tubing and making it much easier.  They give a perfect cut every time and we won’t even attempt cutting RO tubing with a razor blade because they always leave a deformation in the tubing.  A single RO tube cutter is good for…

    $5.99

    …Neat and Easy To Use Niche3D's Mur-Lok Straight Union Fitting Mounting Clips are the perfect accessory for anyone that wants to keep their 1/4" RO Tubing looking clean. Each fitting will hold a single Mur-Lok Straight Push-Connect Union and can be securely mounted to a wall or another rigid surface.…

    $4.99

    …other containers. Installation is as easy as drilling a small hole in the container, sliding the float in and attaching using the included nut. 1/4" tubing inlet and free flow outlet .093 orifice Estimated flow rate of 1.5 GPM at 40 PSI Tested to 100 PSI Approximate diameter is 1.4" Flange to float…

    $15.99

    Single Stage deionization canister. Perfect for adding a DI stage to your RO system or adding an additional stage to your current system. Comes with the Canister, Cartridge full of DI resin and 5 feet of 1/4" tube.

    $39.99

    …Includes Inline Ball Valve Multiple source water connections Mur-lok Push Connect dual EPDM O-Ring fittings 10 Ft Each of 1/4" Blue, Red and Black Tubing Pre-installed NSF Certified Filters   All Bulk Reef Supply RO/DI Systems are covered by our Limited Lifetime Warranty.   4 Stage Value RO/DI…

    Starting at:
    $289.99

    …flow to your RODI.     What's Included? 1x FMM Fluid Monitoring Module 2x Optical Water Level Sensors 1x Float Valve 1x 90° Tube Fitting 1x PMUPv2 1x 4 Meters Orange RO Tubing 1x 3/8" to 1/4" Push Connect Adapter Fitting 1x 1/4" Push Connect Siphon Break 1x Set Screw for Non-Float Valve Applications…

    $199.95

    …items that use 1/4" tubing. The solenoid valves uses the 24V accessory port found on 1Link modules and the EnergyBar 832.   Solenoid Valve (SV-1) This 24VDC powered, normally-closed (NC), solenoid valve has push-fit tubing input and outputs designed for standard 1/4″ tubing. The electrical…

    $29.95

    …8.11" x 10.43" x 22.05" (206mm x 265mm x 560mm) Body Diameter: 5.91" (150mm) Feed Rate: 132-264 GPH (500-1000 LPH) Accepts common 1/4" OD RO tubing Use with Skimz Sulpur-NO3 Media   Skimz Warranty Warranty for Original Purchaser against defective material and workmanship that occurs during…

    $461.99

    …the FMM, and communicate to your Apex the flow rate of water through that pipe or tubing. The FS-25 comes with 1/4" push connect tubing that will work with any standard style 1/4" RO/DI tubing.   Adapting soft 1/4" tubing can be done easily with a 1/4" stem x 1/4" barb adapter.   What's Included? 1x…

    $19.95

    …Push connect fittings need the tubing to go in straight or a leak may be possible.  Tube clips keep the collet on the fitting locked out to hold the tube into the fitting to help prevent leaks.  Anytime you have a tight bend going into a fitting we highly recommend tube clips for safety. Available…

    Starting at:
    $0.19

    …L x 5.5" W x 21" H Input Tube Size - 1/4" Push Connect Output Tube Size - 1/2" Barb Output Capacity - 7 Gallons per Day  Power Consumption - 3W @ 120VAC   What's Included? 1x K1 Kalkwasser Stirrer Body 1x K1 Kalkwasser Stirrer Lid & Motor 6 ft 1/4" Push Connect Tubing   Kalkwasser Calculator: You…

    $209.99

    …Dimensions: 6.93" x 9.25" x 21.65" (176mm x 235mm x 550mm) Body Diameter: 4.72" (120mm) Feed Rate: 79-132 GPH (300-500 LPH) Accepts common 1/4" OD RO tubing Use with Skimz Sulpur-NO3 Media   Skimz Warranty Warranty for Original Purchaser against defective material and workmanship that occurs during…

    $351.99

    …turn of water supply to the RO unit for maintenance simply close the ball valve. John Guest Angle Stop Valve ⅜" ⅜" Male Thread x ⅜" Female Thread ⅜" Quick Connect Ball Valve for ⅜" RO tubing John Guest Angle Stop Valve ¼" ⅜" Male Thread x ⅜" Female Thread ¼" Quick Connect Ball Valve for ¼" RO tubing

    Starting at:
    $10.49