Ro Valve

SORT:
VIEW: 32/64
79 items found. Showing items 1 to 32 .

    …does BRS recommend this? Mur-lok ball valves are some of the highest quality ball valves for push connect style tubing on the market.  With high quality parts, smoother operation, and dual O-rings they will give you a lifetime of leak free operation. Mur-lok RO fittings are the only reverse osmosis…

    Starting at:
    $6.49

    …level is replenished the sensor will tell the controller to shut off power to the solenoid to close the valve and stop the flow of RODI water. The solenoid uses 1/4" push connect fittings to allow RO tubing to connect quickly.   All BRS RODI systems use 1/4" tubing on the product water line.   Note:…

    $22.99

    Puregen ACUC Precision Valves are perfect for many different applications. Everything from calcium reactors, RODI systems or any other place where precision fluid control is necessary and standard push connect tubing is used. The highly durable and fatigue resistant valve and body are designed to…

    Starting at:
    $5.49

    valves increase the flow to the membrane by bypassing the flow restrictor when the valve is opened. This helps flush deposits and significantly increases the usable life of the RO membrane. The Membrane Flush/Flow restrictor valve is an all in one flow restrictor equipped with a flush valve for easy…

    Starting at:
    $9.99

    Valve and check elbow. If you wish to add a float valve to your BRS RODI system, just purchase a float valve separately and connect it to your product water line.  Standard Float Valve Adjustable Float Valve   Auto shut off valves (ASOV) are great for reverse osmosis systems and will allow your RO

    $24.99

    The golden rule of plumbing is that every job takes three trips to the store. While this can be frustrating locally it can be much worse when shopping online. Being short a fitting or two can delay a plumbing project for days. Here are some quick tips to avoid this. Plan your plumbing on paper Don't…

    Starting at:
    $62.99

    Check valves only allow water to flow one direction. 1/8" Male NPT x 1/4" Push Connect elbow check valves are typically used on the product water output of RO membrane housings to protect from back pressure and allow auto shut off valves to operate correctly.

    $3.99

    …No Holes or Drilling Magnetic Mount Dual Optical Eye for Safety Works in Complete Darkness Includes RO Solenoid Valve Eliminates Waste Water Run-Off     1-7 Day Delay Timer Traditional float valves and switches will automatically turn on your RODI system after a couple drops of water are removed…

    $69.99

    Three way ball valve with John Guest 1/4" push connect fitting. John Guest Material: PVC, EPDM Dimensions: 2-3/8" x 2-11/16" Max PSI:125

    $19.99

    Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. We believe GA Murdock Mur-lok fittings to be the best so strongly that we use them virtually exclusively on each of our BulkReefSupply.com reverse osmosis units and BRS media reactors.…

    $8.99

    …which we carry as well. Simply measure the outside diameter of your tubing if you are not sure what size you are working with.   We have two sizes available depending on the RO tubing you need to connect to your pressure tank: 1/4" RO Tubing Tank Shut Off Valve 3/8" RO Tubing Tank Shut Off Valve  

    Starting at:
    $5.99

    …and BRS media reactors.  Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality American made fittings are constructed with FDA approved materials. Mur-lok 90° Elbow Check Valve Polypropylene construction NSF Standard…

    $9.99

    …gallon bucket with a float valve installed in it will help save money from having water end up on the floor or best case scenario just going down the drain.   Float valves are used to shut down your reverse osmosis system when the float is elevated. Float valves are typically installed on containers…

    $16.99

    …solenoid valves uses the 24V accessory port found on 1Link modules and the EnergyBar 832.   Solenoid Valve (SV-1) This 24VDC powered, normally-closed (NC), solenoid valve has push-fit tubing input and outputs designed for standard 1/4″ tubing. The electrical connection on this solenoid valve fits…

    $29.95

    valves are used with float valves or pressurized tanks to shut off an RO system. It utilizes the back pressure created by the float valve or pressurized tank to shut off the water supply to the membrane. Without an automatic shut off valve waste water would continue to run out after the float valve

    $9.99

    …Compatible with 100 GPD membranes or 200 GPD Water Saver systems. Kit includes an 800ml/min Auto Flush Flow Restrictor. Requires working Auto Shut Off Valve to operate.   Installation Instructions: 1. Turn off your source water supply.  2. Locate and replace the current flow restrictor with the new…

    Starting at:
    $104.99

    …and Easy To Use Neat Aquatics' Mur-Lok Mur-Lok Inline Ball Valve Mounting Clips are the perfect accessory for anyone that wants to keep their RO or Reactor Tubing looking clean. Each fitting will hold a single Mur-Lok Inline Ball Valve and can be securely mounted to a wall or another rigid surface…

    $5.99

    …Flush Valve Reverse Osmosis membrane flush/flow restrictor valves increase the flow to the membrane by bypassing the flow restrictor when the valve is opened. This helps flush deposits and significantly increases the usable life of the RO membrane. The Membrane Flush/Flow restrictor valve is an all…

    Starting at:
    $59.99

    …connect an RO unit to the household water supply. It installs under the sink, inline after the shut-off valve. This clean, out of the way installation leaves faucets free for other use.   Mur-lok EZ Angle Stop Adapter 1/4" 3/8" Male Thread x 3/8" Female Thread 1/4" Quick Connect for 1/4" RO tubing…

    Starting at:
    $4.99

    …gallon bucket with a float valve installed in it will help save money from having water end up on the floor or best case scenario just going down the drain.   Float valves are used to shut down your reverse osmosis system when the float is elevated. Float valves are typically installed on containers…

    $15.99

    …Piercing Saddle Valve Installation InstructionsChoose a location as close to the RO unit as possible.Make sure the water supply is OFF.Back up the piercing pin all the way by turning the handle counterclockwise. It should be retracted slightly past the rubber gasket.Position the valve over the pipe…

    Starting at:
    $7.99

    …water. RO/DI unit sold separately.    Kit includes: 3.2 gallon pressurized tank RO tank valve Silver faucet Faucet adaptor Tee for between faucet and pressurized tank Ball valve for turning on and off DI water Check valve for insuring that water in the pressurized tank doesn't flush through the DI…

    $99.99

    …IceCap's ATO Solenoid Valve can work with a gravity fed auto top off reservoirs or just connect it directly to your RODI system. The solenoid valve will replace the pump that comes with the IceCap ATO system, and plugs directly into the ATO controller. Just connect standard 1/4" RO tubing to the…

    $23.00

    Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality American made fittings are constructed with FDA approved materials. Mur-lok 90° Elbow Check Valve Polypropylene construction NSF Standard 58 Certified   Sizes -  Stem x…

    Starting at:
    $8.99

    Diverter Valves are used to attach RO systems to most kitchen sink faucets. They allow RO units to remain connected to the sink. Simply turn the diverter valve lever to operate the RO unit and push back to use the sink faucet. This item is designed for use with our saltwater aquarium line of RO

    $10.99

    …FNPT Connections Gauge port Quick disconnect for plastic tubing Mounting kit   Series P60 is compact and lightweight with a high flow capacity. It is also suitable for deionized water applications.   Maximum Working Pressure: 300psi (20.7 bar).   What's Included? 1x Watts Pressure Reducing Valve

    $59.99

    …turn of water supply to the RO unit for maintenance simply close the ball valve. John Guest Angle Stop Valve ⅜" ⅜" Male Thread x ⅜" Female Thread ⅜" Quick Connect Ball Valve for ⅜" RO tubing John Guest Angle Stop Valve ¼" ⅜" Male Thread x ⅜" Female Thread ¼" Quick Connect Ball Valve for ¼" RO tubing

    Starting at:
    $10.49

    …power auto-off High frequency alarm Mesh pre-filter The Leak Block Sensor from HM Digital includes an electronic sensing pad and a latching solenoid valve that will close if the sensing pad ever comes in contact with water. They can be connected with either 3/8" Female NPT fittings or 1/2" Male BSP…

    $53.00

    Make RO Water production more convenient with Tunze's automated RO Water Controller!   The Tunze RO Water Controller 8555 is used to regulate the water level in your fresh water storage container. It uses two float switches to control an electronic valve. When the water level drops below the first…

    $199.99

    …Check Valve   Note: Housing has 1/8" Female NPT Fittings. We highly recommend the use of a push connect elbow check valve on the product water line if you are going to use an auto shut off valve on your RODI system.  The use of a non-check push connect elbow is totally fine, as inline check valves

    $8.99

    …BRS recommend this? RO Tube Cutters are one of the secrets to working with RO tubing and making it much easier.  They give a perfect cut every time and we won’t even attempt cutting RO tubing with a razor blade because they always leave a deformation in the tubing.  A single RO tube cutter is good…

    $5.99

    …per day. This reverse osmosis package includes our 5 Stage RO unit complete with a pressurized water tank, drinking water faucet, inline carbon filter and all the necessary fittings to install.   Standard RO Features: Automatic shut-off valve Mur-lok Push Connect dual EPDM O-Ring fittings 10 Ft each…

    Starting at:
    $239.99