Ro Water Controller

SORT:
VIEW: 32/64
86 items found. Showing items 1 to 32 .

    …the pump that comes with the IceCap ATO system, and plugs directly into the ATO controller. Just connect standard 1/4" RO tubing to the push-connect fittings included with the pump and plug it into the ATO controller and you are ready to go!  Plug & Play Works with RODI Systems Perfect for Gravity…

    $23.00

    …plug-and-play installation Super precise water level control No programming or adjustments required Works in complete darkness   Specifications: Power Input: 120V AC, 60Hz DC Pump Max Head - 6.5 feet Flow Rate - 74GPH Max Mounting/Tank Thickness - 0.50" Controller Dimensions - 2.2" H x .88" W x 1.9"…

    $199.99

    controller which will shut the included solenoid off, stopping the flow of water.  Automatically Shuts Off Your RO/DI System Installs and Uninstalls in Seconds No Holes or Drilling Magnetic Mount Dual Optical Eye for Safety Works in Complete Darkness Includes RO Solenoid Valve Eliminates Waste Water

    $69.99

    …for almost any water condition, but if you have contaminants that use excessive amounts of DI resin, the 7 Stage RODI system is the ideal choice. It uses cation and anion single bed resins that give you added control and cost savings over traditionally used mixed bed resins. Most water supplies tend…

    Starting at:
    $339.99

    Make RO Water production more convenient with Tunze's automated RO Water Controller!   The Tunze RO Water Controller 8555 is used to regulate the water level in your fresh water storage container. It uses two float switches to control an electronic valve. When the water level drops below the first…

    $199.99

    …Turbulent water action scrubs organic and inorganic contaminant’s from the membrane surface, extending membrane life and efficiency.   The “power flush” system only occurs only while the system is in the water making mode. The flush cycle is reset automatically when the RO system repeats the “water

    Starting at:
    $54.99

    …all water filtration systems, especially Reverse Osmosis Deionization systems where two points of readings may be necessary to judge the quality and performance of the system. The meter includes, easy to use, push connect fittings that will let you place each probe in-line with 1/4” RO tubing.…

    $59.95

    …shut until the battery is replaced.    Possible Applications: RODI Systems Dishwashers Coffee Makers Refrigerators Water Coolers Icemakers Toilets Beverage Stations Under Sinks Water Heaters Clothes Washers Hotels, Apartments, Multi-Story   Specifications: Input Connection - 3/8" FNPT or 1/2" MBSP…

    $53.00

    …drinking water pressure tanks will have a standard male threaded nipple on the tank which allows water to enter and exit the tank. The RO Tank Shut Off Valve will let you turn the water feed on and off from the pressure tank. By simply screwing onto the pressure tank you now have full control over…

    Starting at:
    $5.99

    …Minimum Water Pressure  50-80 psi 50-80 psi 65-80 psi 65-80 psi Tubing Size 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing Water pressure can be increased by adding a booster pump before your RO/DI system. Low pressure may cause the RODI system to produce excessive waste water. Pressure…

    Starting at:
    $149.99

    …x 5.5" x 14" 6" x 5.5" x 14" 6" x 5.5" x 14" 6" x 5.5" x 14" Recommended Minimum Water Pressure  50-80 psi 50-80 psi 65-80 psi 65-80 psi Tubing Size 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing Water pressure can be increased by adding a booster pump before your RO/DI system. Low…

    Starting at:
    $199.99

    …for almost any water condition, but if you have contaminants that use excessive amounts of DI resin, the 7 Stage RODI system is the ideal choice. It uses cation and anion single bed resins that give you added control and cost savings over traditionally used mixed bed resins. Most water supplies tend…

    Starting at:
    $264.99

    …for almost any water condition, but if you have contaminants that use excessive amounts of DI resin, the 7 Stage RODI system is the ideal choice. It uses cation and anion single bed resins that give you added control and cost savings over traditionally used mixed bed resins. Most water supplies tend…

    Starting at:
    $289.99

    …for almost any water condition, but if you have contaminants that use excessive amounts of DI resin, the 7 Stage RODI system is the ideal choice. It uses cation and anion single bed resins that give you added control and cost savings over traditionally used mixed bed resins. Most water supplies tend…

    Starting at:
    $214.99

    …your tap water for two minutes and collect a water sample. 2)  Dip the test strip as directed on packaging and read results.    Up to 5ppm total chlorine & same free chlorine = Chlorine*  Up to 5ppm total chlorine & zero free chlorine = Chloramines* Zero free and total chlorine = Well water* *This…

    $15.99

    …the ATO controller and sensor to allow the flow of RODI water to your sump and when the water level is replenished the sensor will tell the controller to shut off power to the solenoid to close the valve and stop the flow of RODI water. The solenoid uses 1/4" push connect fittings to allow RO tubing…

    $22.99

    Sufficient PSI is very important for the correct operation of a reverse osmosis unit. Low water pressure is a leading cause of poor RO system performance. A pressure gauge assures that proper pressure is being supplied. It will also make pressure drops apparent which can tell you that sediment and…

    $12.99

    …that makes for easy installation on the metal frame common on most RO and RO/DI systems. This allows for readings at two locations in the system, such as after the RO membrane and after the DI resin stage, which is where water quality will most often change with filter performance.   The Titanium…

    $33.99

    …on the metal frame common on most RO and RO/DI systems. This allows for readings at three locations in the system, such as the source line feeding the system, after the RO membrane and finally after the DI resin stage, allowing for monitoring at all major water quality locations.   The Titanium…

    $44.99

    water, but it can also clue you in to when it's time to replace filter media. The Titanium One model features a display with the probe built-in, for simple installation on any 1/4" RO lines to provide quick readings at the spot of installation. This could be great for installing near the water

    $24.99

    …serious about producing quality RO/DI water for their reef tanks, AutoAqua now has four great TDS meter options built on a compact, feature-rich, and easy to install platform! BRS recommends using a TDS meter as one of the most useful tools for ensuring your RO or RO/DI system is functioning at its…

    $24.99

    …excessive wear on air-filled gauges.   Sufficient PSI is very important for the correct operation of a reverse osmosis unit. Low water pressure is a leading cause of poor RO system performance. A pressure gauge assures that proper pressure is being supplied. It will also make pressure drops apparent…

    $20.49

    …push the water through the settled kalkwasser solution allowing the clear amount at the top to flow into your aquarium. A couple of good ATO system is a BRS 50mL Doser and a digital timer (or aquarium controller) or a Tunze Osmolator which can have the pump's flow adjusted by opening the controller

    $269.99

    …push the water through the settled kalkwasser solution allowing the clear amount at the top to flow into your aquarium. A couple of good ATO system is a BRS 50mL Doser and a digital timer (or aquarium controller) or a Tunze Osmolator which can have the pump's flow adjusted by opening the controller

    $329.99

    …push the water through the settled kalkwasser solution allowing the clear amount at the top to flow into your aquarium. A couple of good ATO system is a BRS 50mL Doser and a digital timer (or aquarium controller) or a Tunze Osmolator which can have the pump's flow adjusted by opening the controller

    $379.99

    water resistant casing than the DM-1. This tool monitors the TDS of your reverse osmosis system in two places and lets you know exactly how the system is performing. DM-2 features include: Especially designed for commercial/industrial applications. Stronger, water-resistant casing. Each water line…

    $45.99

    …calibrate your Conductivity Probe and PM2 module for RO/DI water quality and other freshwater applications.   Conductivity probes can be used for many different functions from letting you know the salinity of a tank to the quality of RODI water. We suggest calibrating conductivity probes once every…

    $2.95

    …putting one probe before the DI stage and one after the DI stage to show what your RO is producing for water quality and then how your DI is performing by removing all remaining TDS from the final product water.   The DM-1 Dual Inline TDS Meter from HM Digital is one of the most important reverse…

    $29.99

    …System can be installed in just a few minutes, making 0 TDS water. This system is great for water supplies that are treated with chlorine or low-contaminant well water and can be easily upgraded to a 5-Stage system with an add on RO canister upgrade kit if you have harder to remove contaminants.…

    $507.70 $489.99

    …optical eyes and a float valve to ensure your tanks water level stays the same while preventing overfills. With the ATK v2 you do not need an Apex Controller since it can be run 100% standalone, however with the addition of an Apex Controller additional features can be unlocked and more accessories…

    $199.95

    The FM-2 RO Filter Monitor with Volumizer tracks up to five filter stages at once by time and volume. The monitor allows you to create filter change points at each stage at an individual point in the future or at a specific water volume. When the preset points are reached the FM-2 will alert you…

    $39.99

    …(works with RODI water) Detects water as shallow as 1/32" Replaceable 9v Battery (not included) lasts up to 24 months (recommend testing battery once every 6 months) Dimensions: 4.25" x 3.5" x 1.75"   Pro Tip: By placing a paper towel under the sensors can help wick water towards the sensor…

    $12.99