Rodi Check Valve

SORT:
VIEW: 32/64
13 items found. Showing items 1 to 13 .
  • 1

    …Supply RODI units come pre-installed with an Auto Shut Off Valve and check elbow. If you wish to add a float valve to your BRS RODI system, just purchase a float valve separately and connect it to your product water line.  Standard Float Valve Adjustable Float Valve   Auto shut off valves (ASOV) are…

    $24.99

    We believe GA Murdock Mur-lok fittings to be the best so strongly that we use them virtually exclusively on each of our BulkReefSupply.com reverse osmosis units and BRS media reactors.

    $8.99

    …on tap for immediate drinking water. RO/DI unit sold separately.    Kit includes: 3.2 gallon pressurized tank RO tank valve Silver faucet Faucet adaptor Tee for between faucet and pressurized tank Ball valve for turning on and off DI water Check valve for insuring that water in the pressurized…

    $99.99

    Check valves only allow water to flow one direction. 1/8" Male NPT x 1/4" Push Connect elbow check valves are typically used on the product water output of RO membrane housings to protect from back pressure and allow auto shut off valves to operate correctly.

    $3.99

    …resistant Santoprene rubber.   Note: Requires 1/2" mounting hole. Maximum container wall thickness of 1/4". To shut off your waste water you will need an auto shut off valve and check valve. If you don’t have these please purchase the “Auto Shut Off Kit.”   Float Valve Installation Instructions

    $14.99

    Check Valve   Note: Housing has 1/8" Female NPT Fittings. We highly recommend the use of a push connect elbow check valve on the product water line if you are going to use an auto shut off valve on your RODI system.  The use of a non-check push connect elbow is totally fine, as inline check valves

    $8.99

    …be away from valve.Insert brass insert into tubing end.Tighten compression nut to valve to attach tubing. Do not over tighten.Slowly turn valve handle clockwise to pierce pipe. Turn it all the way. This is the "OFF" position.Back the valve handle out to open.Turn on water supply and check for leaks.

    Starting at:
    $7.99

    …resistant Santoprene rubber.   Note: Requires 1/2" mounting hole. Maximum container wall thickness of 1/4". To shut off your waste water you will need an auto shut off valve and check valve. If you don’t have these please purchase the “Auto Shut Off Kit.”   Float Valve Installation Instructions

    $15.99

    …to ensure a straight leak free fit. These high quality American made fittings are constructed with FDA approved materials. Mur-lok 90° Elbow Check Valve Polypropylene construction NSF Standard 58 Certified   Sizes -  Stem x Push Connect: 3/8" Stem x 1/4" Push Connect 3/8" Stem x 3/8" Push Connect…

    Starting at:
    $8.99

    …to ensure a straight leak free fit. These high quality American made fittings are constructed with FDA approved materials. Mur-lok 90° Elbow Check Valve Polypropylene construction NSF Standard 58 Certified   Sizes -  Male NPT x Push Connect: 1/4" Male NPT x 1/4" Push Connect 1/4" Male NPT x 3/8"…

    $9.99

    …your RO/DI production process. The high & low pressure safety cutoff switch Buddie Fit press-fittings Sealed pressure pump Fast & Easy installation Increase water pressure up to 90 PSI Improved rejection and production rates Built-in internal automatic flush valve Built-in check valve  …

    $129.99

    …system's auto shut off valve (ASOV), we suggest placing it directly after the ASOV.  4. Connect the Pressure Switch Molex connectors into the Power Supply and also the auto flush flow restrictor.  5. Turn your source water supply on, and do a quick leak check. Once the leak check is complete, you…

    Starting at:
    $104.99

    Match your décor by installing a Reverse Osmosis Faucet to your RO system. This style of faucet does not have an air gap for the waste water line.  If installing for drinking water you should check with city code to see if it requires an air gap faucet.

    Starting at:
    $24.99
  • 1