Rodi Tubing

SORT:
VIEW: 32/64
101 items found. Showing items 1 to 32 .

    Polyethylene Tubing for Reverse Osmosis Systems Compatible with all Bulk Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings.    Blue RO Tubing is…

    Starting at:
    $1.99

    Polyethylene Tubing for Reverse Osmosis Systems Compatible with all Bulk Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings.    Black Tubing is commonly…

    Starting at:
    $1.99

    Polyethylene Tubing for Reverse Osmosis Systems Compatible with all Bulk Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings.    Six Sizes Available: Each…

    Starting at:
    $1.99

    The Mur-lok LLDPE Tubing is NSF 58 Component Certified. The products were put through rigorous structural and material testing to help ensure they meet the standards for drinking water. This certification also ensures that Mur-lok tubing can be easily incorporated into any NSF certified drinking…

    Starting at:
    $0.59

    …Height - 0.6" Width - 0.4" Stand-Off Distance From Surface - 0.375" Single Tube Bracket Length - 0.96"  Dual Tube Bracket Length - 1.45" Triple Tube Bracket Length - 1.93" Quad Tube Bracket Length - 2.42"   What's Included? 5x 1/4" Tubing Brackets 10x Mounting Screws3   Note - Tubing not included

    Starting at:
    $5.99

    …and Black Tubing Pre-installed NSF Certified Filters   All Bulk Reef Supply RO/DI Systems are covered by our Limited Lifetime Warranty.   4 Stage Value RO/DI Systems - Perfect for city water that is treated with low amounts of chlorine, or well water with very minimal contaminants. Four stage RODI

    Starting at:
    $264.99

    Polyethylene Tubing for Reverse Osmosis Systems Compatible with all Bulk Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings.    Red RO Tubing is used on…

    Starting at:
    $1.99

    We believe GA Murdock Mur-lok fittings to be the best so strongly that we use them virtually exclusively on each of our BulkReefSupply.com reverse osmosis and BRS media reactors.

    $3.49

    Standard 1/2" (OD) tube for RO systems and BRS reactors   Made in the USA, Mur-lok Linear Low-Density Polyethylene (LLDPE) tubing is designed for use with all Mur-lok and John Guest push connect fittings. Mur-lok polyethylene tubing offers excellent pressure and temperature ratings and has…

    Starting at:
    $0.89

    Keep Your RO/DI Systems Plumbing Neat and Easy To Use Neat Aquatics' Mur-Lok Elbow Union Fitting Mounting Clips are the perfect accessory for anyone that wants to keep their 1/4" RO Tubing looking clean. Each fitting will hold a single Mur-Lok Elbow Push-Connect Union and can be securely mounted to…

    $4.99

    …other uses.   Mur-Lok EZ Faucet Adapter 3/8" 1/2" Male Thread x 1/2" Female Thread Fits 3/8" RO tubing Polypropylene construction NSF Standard 58 Certified   Mur-Lok EZ Faucet Adapter 1/4" 1/2" Male Thread x 1/2" Female Thread Fits 1/4" RO tubing Polypropylene construction NSF Standard 58 Certified

    Starting at:
    $5.99

    ¼" push connect bulkhead tank adapter. Note: These come with a plastic nut and  do not come with a gasket.  They are intended for dry applications such as running a tube through a tank stand, etc.

    $3.99

    …your RODI system, top off system, calcium reactor, or other low flow items that use 1/4" tubing. The solenoid valves uses the 24V accessory port found on 1Link modules and the EnergyBar 832.   Solenoid Valve (SV-1) This 24VDC powered, normally-closed (NC), solenoid valve has push-fit tubing input…

    $29.95

    …in sink drain pipe close to the sink Stick included gasket around hole (remove die cut circle from center if needed Position clamp on pipe and fasten with included screws Push in tubing and check for leaks 1/4" hole needed for 1/4" drain saddle clamp 3/8" hole needed for 3/8" drain saddle clamp  

    Starting at:
    $4.99

    …  7 Stage Pro RO/DI Features: Super efficient with DI consumption Includes BRS Pro resin Produce 0 TDS water Minimal wastewater Includes Float Valve and Inline Ball Valve Multiple source water connections Mur-lok Push Connect dual EPDM O-Ring fittings 10 Ft Each of 1/4" Blue, Red and Black Tubing

    Starting at:
    $339.99

    …turn of water supply to the RO unit for maintenance simply close the ball valve. John Guest Angle Stop Valve ⅜" ⅜" Male Thread x ⅜" Female Thread ⅜" Quick Connect Ball Valve for ⅜" RO tubing John Guest Angle Stop Valve ¼" ⅜" Male Thread x ⅜" Female Thread ¼" Quick Connect Ball Valve for ¼" RO tubing

    Starting at:
    $10.49

    Choose the Aquatec Auto Flush Flow Retrictor that meets your RODI systems flow rate. 300 mL/min 400 mL/min 500 mL/min for 75 GPD single membranes or 150 GPD Water Saver Systems 600 mL/min 700 mL/min 800 mL/min for 100 & 150 GPD single membranes or 200 GPD Water Saver Systems   The Aquatec Auto-Flush…

    Starting at:
    $54.99

    …leaving smaller sediments that do not cause any harm through for your RODI sediment filter.   Keep sediment out of your Aquatec Booster pump with the DMFit Filter Strainer. 100 Mesh (150 Micron) Compatible with standard-sized tubing Available in 2 Sizes: 3/8" x 3/8" or 1/4" x 1/4" Max Operating…

    Starting at:
    $8.99

    …⅜" Male Thread x ⅜" Female Thread ⅜" Quick Connect Ball Valve for ⅜" RO tubing Polypropylene construction NSF Standard 58 Certified Mur-lok EZ Angle Stop Adapter Kit ¼" ⅜" Male Thread x ⅜"Female Thread ¼" Quick Connect Ball Valve for ¼" RO tubing Polypropylene construction NSF Standard 58 Certified

    Starting at:
    $13.99

    …1/4" 3/8" Male Thread x 3/8" Female Thread 1/4" Quick Connect for 1/4" RO tubing Polypropylene construction NSF Standard 58 Certified   Mur-lok EZ Angle Stop Adapter 3/8" 3/8" Male Thread x 3/8" Female Thread 3/8" Quick Connect for 3/8" RO tubing Polypropylene construction NSF Standard 58 Certified

    Starting at:
    $4.99

    …sleeve. Note that the sleeve is narrower on one end. Narrow end should be away from valve.Insert brass insert into tubing end.Tighten compression nut to valve to attach tubing. Do not over tighten.Slowly turn valve handle clockwise to pierce pipe. Turn it all the way. This is the "OFF" position.Back…

    Starting at:
    $7.99

    …fit. These high-quality American made fittings are constructed with FDA approved materials. Just choose the fitting that matches your RO systems tubing size for a quick leak-free connection.  Fits garden hose and utility sink faucets Polypropylene construction NSF Standard 58 Certified   We believe…

    Starting at:
    $6.99

    …mL Dimensions: 3.15"L x 2.34"W x 3.45"H Input Voltage: 110V Vertical Head Pressure: 18 FT Tubing Connections: 1/4" OD push connect*   *Accepts 1/4" RO Tubing. Will also accept 1/4" stem x barb adapter for connection to soft tubing.   What's Included? Versa Persistaltic Dosing Pump Power Supply 

    $149.99

    …float valve. ASOVs do require a minimum of 40 PSI to operate correctly and can be installed on any style of reverse osmosis system that uses 1/4" tubing.   Auto Shut Off Kit Includes: Float valve 5ft of tube Inline check valve 1/4" auto shut off valve   Auto Shut Off Valve Installation Instructions

    $24.99

    …to your reverse osmosis system. The pressurized tank insures that 3.2 gallons of water will be available on tap for immediate drinking water. RO/DI unit sold separately.    Kit includes: 3.2 gallon pressurized tank RO tank valve Silver faucet Faucet adaptor Tee for between faucet and pressurized…

    $99.99

    …and Black Tubing Pre-installed NSF Certified Filters   All Bulk Reef Supply RO/DI Systems are covered by our Limited Lifetime Warranty.   4 Stage Value RO/DI Systems - Perfect for city water that is treated with low amounts of chlorine, or well water with very minimal contaminants. Four stage RODI

    Starting at:
    $214.99

    …Push connect fittings need the tubing to go in straight or a leak may be possible.  Tube clips keep the collet on the fitting locked out to hold the tube into the fitting to help prevent leaks.  Anytime you have a tight bend going into a fitting we highly recommend tube clips for safety. Available…

    Starting at:
    $0.19

    …easiest to remove your skimmer's silencer and directly attach the CO2 Scrubber tubing your pumps venturi. Unscrew the body from the head of the reactor and remove the refillable cartridge. Add 1 to 2 Tbsp of RODI water to the bottom of the reactor body making sure that it does not touch the CO2…

    Starting at:
    $129.99

    …recommend this? RO Tube Cutters are one of the secrets to working with RO tubing and making it much easier.  They give a perfect cut every time and we won’t even attempt cutting RO tubing with a razor blade because they always leave a deformation in the tubing.  A single RO tube cutter is good for…

    $5.99

    …is super simple, just place the properly sized shoe around the tubing and push it down into the fitting, depressing the collet. Then while you are pushing the collet into the fitting, pull the tubing out of the fitting and you are done!   What's Included? 1x Mur-Lok Push Connect Tubing Release Tool

    $3.49

    …are great when you want to leave your RO unit plumbed in. They fit most standard faucets and can be adapted using an adapter ring (not included) if an oddball faucet is encountered.   Faucet Connection - 55/64 - 27   RO Tube Connection - 1/4" Compression   Faucet Diverter Installation Instructions

    $10.99

    Why does BRS recommend this? Mur-lok ball valves are some of the highest quality ball valves for push connect style tubing on the market.  With high quality parts, smoother operation, and dual O-rings they will give you a lifetime of leak free operation. Mur-lok RO fittings are the only reverse…

    Starting at:
    $6.49