Shut Off

SORT:
VIEW: 32/64
115 items found. Showing items 1 to 32 .

    …  1/4" Automatic shut off valves are used with float valves or pressurized tanks to shut off an RO system. It utilizes the back pressure created by the float valve or pressurized tank to shut off the water supply to the membrane. Without an automatic shut off valve waste water would…

    $9.99 Regular Price: $

    …to enter and exit the tank. The RO Tank Shut Off Valve will let you turn the water feed on and off from the pressure tank. By simply screwing onto the pressure tank you now have full control over the flow in and out of the tank. If you do not have this shut off valve you would need to drain all the…

    $5.99 Regular Price: $

    …It installs under the sink, inline after the shut-off valve. This clean, out of the way installation leaves faucets free for other use. To turn off water supply to the RO unit for maintenance simply close the ball valve.   Mur-lok EZ Angle Stop Adapter Kit " * " Male Thread…

    $13.99 Regular Price: $

    …controller and sensor to allow the flow of RODI water to your sump and when the water level is replenished the sensor will tell the controller to shut off power to the solenoid to close the valve and stop the flow of RODI water. The solenoid uses 1/4" push connect fittings to allow RO tubing to…

    $22.99 Regular Price: $

    …Note: Requires 1/2" mounting hole. Maximum container wall thickness of 1/4". To shut off your waste water you will need an auto shut off valve and check valve. If you don’t have these please purchase the “Auto Shut Off Kit.”   Float Valve Installation Instructions

    $15.99 Regular Price: $

    …mounts directly to the canisters of your RODI system so any leaks go directly into the tray where the Flow-Lok switch can be mounted for an instant shut off. * 1/4" Push-connect fittings * Purchase multiple for different locations * Simple design with virtually no-fail points *…

    $29.99 Regular Price: $

    …and can be installed on any style of reverse osmosis system that uses 1/4" tubing.   Auto Shut Off Kit Includes: * Float valve * 5ft of tube * Inline check valve * 1/4" auto shut off valve   Auto Shut Off Valve Installation Instructions

    $24.99 Regular Price: $

    Insurance against leaks and drips from RODI system, and many other household applications! The Latching solenoid automatically shuts off the flow of water and also makes a loud beeping noise when the sensor detects moisture * 3/8" FNPT (ID) Threads or 1/2" BSP Threads (OD) * Can be…

    $53.00 Regular Price: $

    …When water reaches the optical eye, it will send an electronic signal to the controller which will shut the included solenoid off, stopping the flow of water.  * Automatically Shuts Off Your RO/DI System * Installs and Uninstalls in Seconds * No Holes or Drilling *…

    $69.99 Regular Price: $

    …switches are exposed to this kind of "spiking voltage" they can overheat and become deformed. In some cases they may even weld together or break off, causing the switch circuit to remain closed (or open) regardless of the level of the float. Deformed reeds can also function intermittently, causing…

    $10.99 Regular Price: $

    Check valves only allow water to flow one direction. 1/8" Male NPT x 1/4" Push Connect elbow check valves are typically used on the product water output of RO membrane housings to protect from back pressure and allow auto shut off valves to operate correctly.

    $3.99 Regular Price: $

    …connections repetitive installs and removals will not cause issues like plastic may sometimes.  With a simple ball valve you can also shut the feed of water off to the RODI system while keeping water flowing up to your sink.   John Guest Angle Stop Valve's directly connect RO…

    $10.49 Regular Price: $

    …is critical to prevent overheating when pulling the fleece in high flow applications. They added a redundant shut off sensor to ensure the fleece roll stops when the return pump shuts off. There are wire channels that hide the wires. On all models except the cube, the middle wall that separates the…

    $899.99 Regular Price: $

    …a necessity, as it can keep your skimmer pump from running dry if no water is being fed into the skimmer.  When the Red LED is on, Power is shut off to the skimmer When the Green LED is on, Power provided to the skimmer Technical Data * Input: 110V AC 60Hz * Output: 110V AC…

    $44.99 Regular Price: $

    …Note: Requires 1/2" mounting hole. Maximum container wall thickness of 1/4". To shut off your waste water you will need an auto shut off valve and check valve. If you don’t have these please purchase the “Auto Shut Off Kit.”   Float Valve Installation Instructions

    $16.99 Regular Price: $

    …switches are exposed to this kind of "spiking voltage" they can overheat and become deformed. In some cases they may even weld together or break off, causing the switch circuit to remain closed (or open) regardless of the level of the float. Deformed reeds can also function intermittently, causing…

    $15.99 Regular Price: $

    …Extra chamber for collecting skimmate * Carbon filter cup to help reduce odor - easily removed for carbon exchange * Auto shut off feature to turn off skimmer and avoid overflows   Item #: OCT-WC140   * Height: 21.75" * Diameter: 5.5" *…

    $234.99 Regular Price: $

    …for carbon exchange * Auto shut off and 5min delay feature to turn off skimmer and avoid overflows   Specifications: * Height: 18" * Diameter: 3.9" * Footprint: 6.5" x 6.5" * 5 minute delay function keeps skimmer off an extra 5 minutes after power is…

    $219.99 Regular Price: $

    …for more than 3x that average baseline time, it will shut the pump off and create an audible alarm. * Empty Reservoir Alert: The system can detect when the top off pump is drawing excess air/running dry and automatically shut the pump off and create an audible alarm. * Sensor Obstruction…

    $89.99 Regular Price: $

    …full. Most often triggered with a float valve Your system must have a working auto shut off kit for this switch to work properly. * ¼” Push Connect fittings * Preset at 40 PSI * Adjustable (30-60) PSI "trigger point" for application specific shut off pressure

    $19.99 Regular Price: $

    …under pressure and allow it to come out at a much greater speed saving you time. Reverse Osmosis Pressurized Tank 4 Gallon tank Holds approxamately 3.2 gallons of water.   Reverse Osmosis Tank Shut Off Valve is not included and required for final assembly.  

    $49.99 Regular Price: $

    …Aquatec 8800 Booster Pump - all in one kit. It also includes the pressure switch so it will work with reverse osmosis units that are set-up to shut off automatically. ¼” Push Connect fittings. Benefits of maintaining higher water pressures * Improved waste water ratio *…

    $149.99 Regular Price: $

    …Water Saver systems. Kit includes an 800ml/min Auto Flush Flow Restrictor. Requires working Auto Shut Off Valve to operate.   Installation Instructions: 1. Turn off your source water supply.  2. Locate and replace the current flow restrictor with the new Auto…

    $104.99 Regular Price: $

    …Water Saver systems. Kit includes an 800ml/min Auto Flush Flow Restrictor. Requires working Auto Shut Off Valve to operate.   Installation Instructions: 1. Turn off your source water supply.  2. Locate and replace the current flow restrictor with the new Auto…

    $104.99 Regular Price: $

    …pressure if you require long runs of tubing. This booster pumps requires a transformer which is sold separately. If your RO system has an auto shut off kit or you are planning on installing one the Aquatec PSW Pressure Switches (sold separately) is also required.   Benefits of…

    $109.99 Regular Price: $

    …to get better performance out of your system. This booster pumps requires a transformer which is sold separately. If your RO system has an auto shut off kit or you are planning on installing one the Aquatec PSW Pressure Switches (sold separately) is also required. Benefits of maintaining higher…

    $99.99 Regular Price: $

    Why does BRS recommend this? The Mur-Lok EZ Faucet Adapter kit allows you to install a shut off feed valve while being able to swivel the output any direction needed if space is tight under your sink.   Mur-lok EZ Faucet Adapters are one of the most convenient ways to connect an…

    $5.99 Regular Price: $

    The Finnex HPG Series of heaters are fully encased in a protective plastic shell that houses the extra thick quartz glass heater. With automatic shut off features, an external temperature probe, and bright red LED display, Finnex HPG heaters are the perfect solution for any freshwater or saltwater…

    $29.99 Regular Price: $

    …calibrate the heater for precise temperature * Easy calibration to ±2ºF * Run dry protection with Thermo safety control - heater shuts off when not submerged * UL Certified Heater * ON/OFF control lamp to indicate a heating function * 5 1/2 Ft. cable * Includes…

    $24.68 Regular Price: $

    Why does BRS recommend this? The Mur-Lok EZ Faucet Adapter kit allows you to install a shut off feed valve while being able to swivel the output any direction needed if space is tight.   This Mur-lok Faucet Adapter Kit is one of the most convenient ways to connect an RO unit to…

    $14.99 Regular Price: $

    …1/8" Female NPT Fittings. We highly recommend the use of a push connect elbow check valve on the product water line if you are going to use an auto shut off valve on your RODI system.  The use of a non-check push connect elbow is totally fine, as inline check valves can be added at any time.

    $8.99 Regular Price: $

    …Water and Environmental Technology, D1426-92, Nessler method. The reaction between ammonia and reagents causes a yellow tint in the sample. Auto shut off after 10 minutes of non-use.   Dedicated to a single parameter Two sample cuvettes and caps. One bottle of reagent A and one…

    $49.95 Regular Price: $