Skimmer Ozone

SORT:
VIEW: 32/64
30 items found. Showing items 1 to 30 .
  • 1
Related Categories Ozone | Ozone Generator | Orp | Ozone Reactor | Timer | Uv | Ozotech | Orp Generator

    …airflow rates   Safety Note We strongly recommend using ozone in conjunction with an ORP controller to ensure it is used safely. It is extremely important to use carbon on both the air and water output of the reactor or protein skimmer. Ozone is not healthy to breath in large quantities so if you…

    $244.99

    …corrosion resistant Single chamber heat regenerative dryer Control timer to set regeneration time manually   We suggest using a dedicated skimmer, vacuum pump, or ozone reactor to pull air through the IQ Air Dryer. Air cannot be pushed into the IQ Air Dryer.   Specifications 5-40 SCFH Wattage: 90…

    $729.99

    …airflow rates   Safety Note We strongly recommend using ozone in conjunction with an ORP controller to ensure it is used safely. It is extremely important to use carbon on both the air and water output of the reactor or protein skimmer. Ozone is not healthy to breathe in large quantities so if you…

    $419.99

    Universal Air Filter with low resistance refillable cartridge. 100% Plastic Design. This unit is most commonly used with ozone generators to hold desiccant DI Dryer Media however you can fill it with carbon or other medias to filter air as well. 3/16” barbed fittings 10’ of tube One 10” refillable…

    $29.99

    …per 200 L (50 gallons) for a period of a week. Ozone post-treatment: The recommended dosage of Red Sea’s REEF-SPEC Carbon to remove residual ozone is 50 gr per 50mg/hr of ozone injection. The carbon should be placed at the ozone reactor/ protein skimmer outlet. Carbon should be replaced once it has…

    Starting at:
    $12.00

    …of bottle). Turn off UV and skimmer (plus ozone if you have it) for a few hours BUT observe your tank with a flashlight.   NOTE - if the water starts to turn cloudy, turn all filtration back on ASAP.   Day 2 and 3: Treat with a full dose of Re-Fresh leaving the skimmer & UV off for a few hours each…

    Starting at:
    $33.99

    SPECIFICATIONS: 3/16" Kynar Tee Tubing ID: 3/16" Fitting Material: Kynar NPT Connection: None 1/4" Kynar Tee Tubing ID: 1/4" Fitting Material: Kynar NPT Connection: None 3/8" Kynar Tee Tubing ID: 3/8" Fitting Material: Kynar NPT Connection: None 1/2" Kynar Tee Tubing ID: 1/2" Fitting Material: Kynar…

    Starting at:
    $3.29

    …your ozone generator will have maximum output and extended use. Sold with reusable silica gel beads recharged by simply baking in an oven.   Ozotech Ozone Air Dryer Specs and Benefits: Silica gel beads are rechargeable by simply baking in an oven Maximize Ozone Generator performance Extends Ozone

    $84.99

    …a skimmer. A lot of reefers will use ozone to slightly raise the ORP in their tank, where others will use it to maintain a specific ORP number.    What's Included: 1x Enaly 200 Ozac-Plus Ozone Generator 1x Air Dryer with Media 6ft Ozone safe tubing   Safety Note We strongly recommend using ozone in…

    $219.99

    …with an ozone generator. Double the time between change outs. BRS Jumbo Ozone Air Dryer removes humidity from the air which ensures that the ozone generator will have maximum output and extended use. Sold with reusable silica gel beads recharged by simply baking in an oven.   BRS Jumbo Ozone Air…

    $129.99

    …using Ozone will have the following benefits in the aquarium: Healthier corals and increased polyp extension due to the oxidation and breakdown of corals defensive toxins Consistently clear water and proper light penetration due to the oxidation and breakdown of color pigments. Increased skimmer

    Starting at:
    $3.09

    Economical Ozone resistant tubing is perfect for Ozone concentrations typically used in the aquarium.   Can be used with ozone concentrations up to 1% by wt. Flexible to -40°F High working temp (170°F) Does not contain Plasticizers Significantly more flexible than standard polyethylene tubing…

    Starting at:
    $1.59

    …cell to foul, making the generator work harder to create ozone. Cleaning the cell only takes a few minutes and the CD Cell Cleaning Kit includes everything you will need for the cleaning process.   Compatible with the following Ozotech Ozone Generators: EOG 100 EOG 200 EOG 400 Poseidon 100 Poseidon…

    $34.95

    …a long life of service. Many ozone generators will require a source of vacuum to pull the air through the generator, and most reefers have just used their skimmer's air intake, but that can be unreliable and degrade the performance of your expensive protein skimmer. Using a vacuum pump is much safer…

    $149.95

    …a skimmer. A lot of reefers will use ozone to slightly raise the ORP in their tank, where others will use it to maintain a specific ORP number.   What's Included: 1x Enaly 100 Ozac-Plus Ozone Generator 1x Air Dryer with Media 6ft Ozone safe tubing   Safety Note We strongly recommend using ozone in…

    $189.99

    …corrosion resistant Single chamber heat regenerative dryer Control timer to set regeneration time manually We suggest using a dedicated skimmer, vacuum pump, or ozone reactor to pull air through the IQ Air Dryer. Air cannot be pushed into the IQ Air Dryer.   Specifications 5-20 SCFH Wattage: 50 VA…

    $519.99

    SPECIFICATIONS: 3/16" Kynar Y Tubing ID: 3/16" Fitting Material: Kynar NPT Connection: None 1/4" Kynar Y Tubing ID: 1/4" Fitting Material: Kynar NPT Connection: None 3/8" Kynar Y Tubing ID: 3/8" Fitting Material: Kynar NPT Connection: None 1/2" Kynar Y Tubing ID: 1/2" Fitting Material: Kynar NPT…

    Starting at:
    $3.49

    …Ozotech Poseidon 200 Ozone Generators and Ozotech Poseidon 220 Ozone Generators.   This is the one part that may go bad over time with an Ozotech Ozone Generator. This is a direct replacement for the Discharge Cell on Ozotech Poseidon 200 Ozone Generators and Ozotech Poseidon 220 Ozone Generators.

    $69.99

    SPECIFICATIONS: 3/16" Barb x 3/16" Barb Tubing ID: 3/16" Fitting Material: Kynar NPT Connection: None 1/4" Barb x 1/4" Barb Tubing ID: 1/4" Fitting Material: Kynar NPT Connection: None 3/8" Barb x 3/8" Barb Tubing ID: 3/8" Fitting Material: Kynar NPT Connection: None

    Starting at:
    $12.99

    SPECIFICATIONS: Kynar barb union connector, 3/16" barb Tubing ID: 3/16" Fitting Material: Kynar NPT Connection: None Kynar barb union connector, 1/4" Barb Tubing ID: 1/4" Fitting Material: Kynar NPT Connection: None Kynar barb union connector, 3/8" barb Tubing ID: 3/8" Fitting Material: Kynar NPT…

    Starting at:
    $1.99

    …using Ozone will have the following benefits in the aquarium: Healthier corals and increased polyp extension due to the oxidation and breakdown of corals defensive toxins Consistently clear water and proper light penetration due to the oxidation and breakdown of color pigments. Increased skimmer

    Starting at:
    $3.09

    Ozone Resistant Kynar Reducing Barb Union used to connect different sized tubing. Using ozone resistant materials is absolutely critical when working with ozone. Materials like nylon will melt in a matter of days when it comes in contact with high concentrations of ozone. Inexpensive ozone resistant…

    $2.39

    Hot swappable air dryer media cartridge. Comes with and holds 3 lbs. of media. Save time and make air dryer maintenance a breeze.  

    $55.99

    …to use valves on the market for air flow control. Many cheaper control valves will start to leak air, or have minimal control of air flow. The Two Little Fishies Ball Valves give you precise control, letting you fine tune the amount of air traveling to your air stone, skimmer, or ozone generator.

    Starting at:
    $2.06

    …sterilizers, protein skimmers, and ozone before administering Chemi Clean to the aquarium. After treatment is complete perform a 20% water change, after that point any carbon filtration, UV, protein skimmers*, or ozone may be turned back on.   *It is very common for protein skimmers to over skim for…

    $24.99

    …sterilizers, protein skimmers, and ozone before administering Chemi Clean to the aquarium. After treatment is complete perform a 20% water change, after that point any carbon filtration, UV, protein skimmers*, or ozone may be turned back on.   *It is very common for protein skimmers to over skim for…

    Starting at:
    $15.99

    Silica gel beads for Ozone Air Dryers. Starts blue and turns pink when saturated. Bake in oven at at 300° F for 3 hours to recharge to blue. 1.5lbs DI Air Dryer Media (Desiccant).

    Starting at:
    $33.49

    …a long life of service. Many ozone generators will require a source of vacuum to pull the air through the generator, and most reefers have just used their skimmer's air intake, but that can be unreliable and degrade the performance of your expensive protein skimmer. Using a vacuum pump is much safer…

    $135.95

    …your saltwater will avoid this issue. Before adding One & Only, turn on circulation and heat. Remove filter filter socks and turn off UV, skimmers, and ozonizers for at least 48 hours after adding One & Only bacteria. Add One & Only. Shake the bottle well for a few seconds and then pour the entire…

    Starting at:
    $32.94

    …the exact volume of aquarium water. For heavy infestations and outbreaks, up to 6ml Dino X per 100 L (26 gal) can be dosed. A high performance skimmer is recommended. Dosage should be repeated every 2 days until algae is completely eliminated. A general treatment period cannot be given due to many…

    Starting at:
    $29.99
  • 1