Solenoid

SORT:
VIEW: 32/64
41 items found. Showing items 1 to 32 .

    …The solenoid valves uses the 24V accessory port found on 1Link modules and the EnergyBar 832.   Solenoid Valve (SV-1) This 24VDC powered, normally-closed (NC), solenoid valve has push-fit tubing input and outputs designed for standard 1/4″ tubing. The electrical connection on this solenoid valve…

    $29.95

    …and properly secured, connect the power plug. If power (AC 100V ~ 230V) is present, the solenoid valve will be opened. If power is disconnected, the solenoid valve will be closed. Please Note: Sometimes the solenoid valve is open before the power is connected, and gas starts to flow through when the…

    $39.99

    …this may be the option for you. Replacing the stock pump with the Smart Solenoid will easily take under 1 minute. Simply disconnect your current pump from the controller and plug in the solenoid. It is that easy.   The solenoid works in conjunction with the ATO controller and sensor to allow the…

    $22.99

    …place the solenoid after sediment filters, or even better after carbon blocks to remove any particulates that could clog the solenoid valve. Installing the valve before your RO/DI system can cause the solenoid valve to fail prematurely.  RO/DI System with an Auto Shut Off Valve - The solenoid valve…

    $69.99 $49.99

    Replace the pump on your IceCap ATO with a Solenoid Valve Compatible with the IceCap ATO system. IceCap's ATO Solenoid Valve can work with a gravity fed auto top off reservoirs or just connect it directly to your RODI system. The solenoid valve will replace the pump that comes with the IceCap ATO…

    $23.00

    …Fitting Fully automatic Electric solenoid Controllable LED bubble indicator No needle valves Accurate to +/- 1/1000 of a second 3 year warranty   A good reliable CO2 Regulator and Solenoid is a vital part of any calcium reactor. Many traditional needle valve solenoids can change how much flow is let…

    $349.99

    Use the Water Valve from Tunze to connect to the Tunze Osmolator - the water valve replaces the pump with an electrically operated solenoid. Use it to control the flow of water from a tube rather than pumping it from a container like gravity-fed auto top off system.   Max Water Pressure - 145 PSI…

    $91.37 $73.10

    …make better decisions on the overall value of your equipment. Each Energy Bar 832 also has two 24VDC accessory ports that can power small pumps, solenoids, fans and more, while the built-in 100W DC power supply lets you control up to 3 1Link accessories like the WAV circulation pumps, and DOS fluid…

    $799.95

    …Calcium Reactor CO2 Systems   Keep the CO2 flowing into your calcium reactor with the Tunze Regulator and Solenoid Kit. We have searched for a reliable and low-cost CO2 regulator and solenoid and found the Tunze combo gave the best results. Tunze CO2 Regulators Cylinders thread into standard CGA 320…

    $210.00 $168.00

    …electronically controlled solenoid that connects directly to the Tunze SmartController 7000. The solenoid Valve will plug into one of the controllers In/Out control ports, but does come with a Y adapter cable allowing you to connect another light or pump in-line to the solenoid valve with individual…

    $71.53 $57.22

    …input. This adds another controllable outlet to your Apex set up. So, for instance, if you do want to make your own ATO and attach our available PMUP or Solenoid Valve, you can do so. Simply add our 36W 24V DC power supply (available separately).   What's Included? 1x FMM Module 1x Aquabus Cable

    $99.95

    …level sensors are extremely reliable and long-lasting when utilized properly. Failures are nearly always a result of current overloading. Pumps, solenoids and many other devices that require control by a liquid level sensor carry "steady state" current ratings. These devices can draw ten times (or…

    $15.99

    …level sensors are extremely reliable and long-lasting when utilized properly. Failures are nearly always a result of current overloading. Pumps, solenoids and many other devices that require control by a liquid level sensor carry "steady state" current ratings. These devices can draw ten times (or…

    $16.49

    …rejection rate and extending membrane sediment and carbon filter life.   Upon system start-up and every hour thereafter, the 24VAC normally closed solenoid valve automatically “power flushes” the membrane at full pump flow, or full line pressure in unboosted systems, for 18 seconds every hour.…

    Starting at:
    $54.99

    …before its too late and to save your aquarium. The data from the Trident can also be used to turn on and off other devices (like dosers or solenoids) to protect your tank even more.   Ultimate Stability with the Neptune DŌS The more stable you maintain proper levels of Alkalinity, Calcium,…

    $599.95

    …also has a DC24 accessory port and a power supply input. This adds another controllable outlet to your Apex set up. So, for instance, if you do want to make your own ATO and attach our available PMUP or Solenoid Valve, you can do so. Simply add our 36W 24V DC power supply (available separately).    

    $199.95

    …Output Connection - 3/8" FNPT or 1/2" MBSP Power Requirements - 9V Battery (included) Head Unit Dimensions - 3.125” L x 1.25” W x 2.375” H Solenoid Dimensions - 2.5" L x 2.75" W x 1.625" H Cord Length - 39"   What's Included? 1x LBS-10 Leak Block Sensor 1x LBS-1SOL Leak Block Solenoid 1x 9v Battery

    $53.00

    Prevent overflows or equipment from running dry! Using a tiny optical sensor, AutoAqua's Smart Level Sensor will cut power to the outlet when the sensor detects a change in water level. The plug & play design requires no difficult programming and the magnetic attachment makes placement and…

    $59.99

    …that will break down at lower pH levels. The calcium reactor will require CO2 to be injected into the reactor by the means of a regulator and solenoid (sold separately). The CO2 then go through the bubble counter to visually monitor how much CO2 is being allowed into the calcium reactor to lower…

    $199.99 $119.99

    …of your choice. The other end of the cable will connect to the 24v DC port on the EnergyBar 832 or the 1Link module. The port can be switched on and off just like any other outlet.   You can use any accessory up to 24V DC like pumps, fans, and solenoids just as long as they draw less than 35 watts.

    $17.95

    …only takes a few seconds. Just close the pressure adjustment valve all the way, screw the union nut onto the cylinder, connect your favorite solenoid, and then set your working pressure with the pressure adjustment knob. It is recommended to start at a pressure of 7.25 PSI (0.5 bar) for the best…

    $111.43 $89.14

    …level sensors are extremely reliable and long-lasting when utilized properly. Failures are nearly always a result of current overloading. Pumps, solenoids and many other devices that require control by a liquid level sensor carry "steady state" current ratings. These devices can draw ten times (or…

    $10.99

    …that will break down at lower pH levels. The calcium reactor will require CO2 to be injected into the reactor by the means of a regulator and solenoid (sold separately). The CO2 then go through the bubble counter to visually monitor how much CO2 is being allowed into the calcium reactor to lower…

    $296.99

    …- 0.50" Controller Dimensions - 2.2" H x .88" W x 1.9" L Sensor Cable Length - 10 feet Pump Cable Length - 69 inches Solenoid Valve Power Consumption: 6 W @ 12V DC Solenoid Cable Length: 4ft AC Switch Max Load:10 A / 1,200 W @ 120V AC AC Switch Cable Length: 115 inches Power Supply Cable Length:…

    $199.99

    …level sensors are extremely reliable and long-lasting when utilized properly. Failures are nearly always a result of current overloading. Pumps, solenoids and many other devices that require control by a liquid level sensor carry "steady state" current ratings. These devices can draw ten times (or…

    $27.99

    …level sensors are extremely reliable and long-lasting when utilized properly. Failures are nearly always a result of current overloading. Pumps, solenoids and many other devices that require control by a liquid level sensor carry "steady state" current ratings. These devices can draw ten times (or…

    $20.99

    …level sensors are extremely reliable and long-lasting when utilized properly. Failures are nearly always a result of current overloading. Pumps, solenoids and many other devices that require control by a liquid level sensor carry "steady state" current ratings. These devices can draw ten times (or…

    $16.99

    …level sensors are extremely reliable and long-lasting when utilized properly. Failures are nearly always a result of current overloading. Pumps, solenoids and many other devices that require control by a liquid level sensor carry "steady state" current ratings. These devices can draw ten times (or…

    $28.99

    …Neptune FMM & DOS power supply is 24VDC, 36W and can be used with the FMM so that you can attach the powered accessories above like the PMUP or the Solenoid Valve. It also is compatible with the Neptune DOS Fluid Metering System. This power supply is for 110V USA-style outlets.   What's Included? 1x…

    $29.95

    …Controller 2x Push Connect Ball Valves 2x  Suction Cups 1x Inline Check Valve Tubing   What Else Is Required For Use? (not included) CO2 Regulator & Solenoid - We have had great success with the CarbonDoser from Aquarium Plant Life pH Controller & Probe - The Milwaukee MC122 is very reliable and is…

    $529.99

    …Controller 2x Push Connect Ball Valves 2x  Suction Cups 1x Inline Check Valve Tubing   What Else Is Required For Use? (not included) CO2 Regulator & Solenoid - We have had great success with the CarbonDoser from Aquarium Plant Life pH Controller & Probe - The Milwaukee MC122 is very reliable and is…

    $599.99

    …Controller 2x Push Connect Ball Valves 2x  Suction Cups 1x Inline Check Valve Tubing   What Else Is Required For Use? (not included) CO2 Regulator & Solenoid - We have had great success with the CarbonDoser from Aquarium Plant Life pH Controller & Probe - The Milwaukee MC122 is very reliable and is…

    $709.99