Tds Calibration

NaCl calibration solution, available in 342 ppm. Comes in lightweight HDPE plastic bottles. Sealed with a coated foam liner.

…TRM-1 TDS Meter Features Advanced microprocessor technology Auto-off function shuts off after 10 minutes of non-use Dual Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.) Factory Calibrated: calibrated…

…DI resin. This unit features a digital display and comes with two 1/4" GA Murdock Quick Connect Tee's with double o-rings to ensure a proper seal. As with all HM-Digital products, the DM-2 comes factory calibrated. The DM-2 is an upgrade to the DM-1 TDS Meter:   TDS Meter Installation Instructions

The TDS-3 Handheld TDS Meter from HM Digital is a useful tool to spot check the TDS of your home water supply or RO/DI unit output. This unit features a digital display, built in thermometer, and comes with a carrying case. As with all HM-Digital products, the TDS-3 comes factory calibrated.

…membrane and DI resin. This unit features a digital display and comes with two 1/4" GA Murdock Quick Connect Tee's with double o-rings to ensure a proper seal. As with all HM-Digital products, the DM-1 comes factory calibrated.   Replacement Battery Type - LR44G   TDS Meter Installation Instructions

…locations include pre-system, post membrane or post DI stage. This unit features a digital display and comes with a 1/4" GA Murdock Quick Connect Tee with double o-rings to ensure a proper seal. As with all HM-Digital products, the SM-1 comes factory calibrated.   TDS Meter Installation Instructions

…Meter. Automatic Temperature Compensation (ATC) IP-67 Waterproof Housing Large LCD Screen Auto-Off  Low-Battery Indicator Digital Calibration Factory Calibration   Conductivity Meters are ideal for many different water applications like reverse osmosis water purity, wastewater regulation,…

…and get alerts when it is out of range. Replace an old probe Add salinity monitoring to your system via the Salinity Module: PM2   *Calibration solutions sold separately Use 53.0mS calibration fluid for monitoring salinity of saltwater Use 447mS calibration fluid for monitoring TDS of freshwater

…or °F Auto Off - 8 Minutes Dimensions - 6.4" L x 1.6" W x 1.0" H Warranty - 1 year   Calibration Settings: EC/TDS Calibration - Single Point (1413 µS/cm, 1382 ppm) pH Calibration - Two Point (4.01/7.01/10.01) TDS Conversion Factor - 0.45 to 1.00 Temperature Compensation - pH (automatic) EC/TDS…

…one of the most essential pieces of equipment is a good RO/DI system. The BRS 4 Stage RO/DI System can be installed in just a few minutes, making 0 TDS water. This system is great for water supplies that are treated with chlorine or low-contaminant well water and can be easily upgraded to a 5-Stage…