Temperature Probe

SORT:
VIEW: 32/64
45 items found. Showing items 1 to 32 .

    Long-life Temperature Probe - replace your Temperature Probe, add one for another tank, or put one on your PM2/PM3 module for temperature compensated readings.

    $29.95

    …Supply Aquarium Temperature Controller Ink Bird ITC-308S-A Aquarium Temperature Controller   Specifications: Temperature range: -58 ° F~210 ° F / -50 °C ~99 °C Probe Material: Plastic Cord Length (excluding probe): 6.5 ft (2m)   What's Included: 1 x Detachable Aquarium Temperature Probe with Fixed…

    $8.99

    temperature and room temperature. Available in °F or °C models. Has four Alert features. (Alarm will sound and LED flashes) High Temp Alert Only (Probe) Both High & Low Temp Alert Only (Air/Room) Low Temp Alert Only (Probe) Both High & Low Temp Alert Only (Probe)   You cannot see the temperature of…

    $42.90

    …as a temperature monitor. It is best practice to place the thermometer in the tanks water, next to the probe you wish to calibrate for about 10 minutes, then turning the calibration thermometer on and proceeding with calibration of the probe.   What's Included? Long Stem Temperature Probe Armored…

    $69.25

    …a reef tank's temperature steady is crucial to long-term success and the BRS Heater Controller lets you set the temperature anywhere between 58°F and 99.9°F and then will keep it within 0.3°F of the controllers set temperature.   Replaceable Temperature Probe The tank's temperature is sensed through…

    Starting at:
    $89.99

    …heaters off, and the temperature will start to fall. Once you aquarium's water temperature falls 0.3°F below the set temperature, the heaters will turn back on, heating your aquarium water.   Replaceable Temperature Probe The tank's temperature is sensed through a replaceable probe that is 72" long…

    $49.99

    Knowing the temperature of your reef tank is very important, and with the Hanna Checktemp HI98509 Digital Thermometer, you can accurately know your aquariums temperature within 0.5°F. Each Checktemp comes with a 3.3' silicone cable that has a stainless steel probe at the end that gives rapid…

    $39.00

    …with probe holders you can have the water that is going to feed your tank run through probes right before it enters the tank. The probe holder fitting it will screw directly into 1/2" Female NPT threads for a leak-free connection. Note: Neptune Apex temperature probes will not work with the probe

    $19.99

    …Module has extra Temp Probe port I/O Switch Inputs for ATO, feed buttons, leak alarms, etc. Monitor multiple tanks Galvanic Isolation for accurate and reliable probe readings   Features of the Neptune Systems pH/ORP Expansion Module: Monitor and Control pH or ORP and temperature 6 digital inputs for…

    $84.95

    Neptune Systems designed the MPR - Magnetic Probe Rack specifically for the Apex. It will hold the larger diameter temperature probe, pH probe, ORP probe, and salinity probe. Made from acrylic and with strong neodymium magnets Works securely on sumps and aquariums up to 1/2" thick   Dimensions - 4"…

    $39.95

    Lab Grade Dissolved Oxygen Probe for Neptune PM3 Module. The price of the probe isn't all that cheap compared to the traditional probes we use in this hobby, but this probe can easily last you a lifetime because the actual sensing membrane is replaceable. About every 3 months you will need to…

    $699.95

    …that can be traced back to its original batch and is stable for up to 5 years in its packaging.  Temperature scale printed on every sachet Compact and easy to use sachets Accurate and reliable  Works with salinity pens and probes   What's Included? 1x HI70024P 35PPT Salinity Calibration Sachet

    Starting at:
    $1.05

    …location, maximizing space for media on the bottom plate.    Probe Holder All RM30 sumps come with a probe holder that can hold up to four probes. The countersunk holes accept almost all major brands of probes, even Neptune's temperature probe.   Dosing Tube Holder The RM30 sump comes standard with…

    $449.99 $359.99

    …higher temperature differentials. Greater temperature differentials can be achieved by insulating the exterior surfaces of the aquarium. For example, a single IceProbe Chiller can maintain a temperature differential of over 20ºF in a fully insulated 10 gallon aquarium. IceProbe Typical Temperature

    $119.99

    …Grade Salinity Probe 1x Lab Grade Double Junction pH Probe 1x Lab Grade Double Junction ORP Probe 1x Temperature Probe Salinity and pH calibration solutions   Apex Control System The new Apex's Head Unit now includes the ability to have salinity monitoring, pH, ORP, and Temperature monitoring right…

    $799.95

    …easier from calibrating probes to customizing outlets. Fusion gives you the ability to monitor and control your Apex from anywhere in the world.   Apex Control System The new Apex's Head Unit now includes the ability to have salinity monitoring, pH, ORP, and Temperature monitoring right out of the…

    $399.95

    …Aquarium Temperature Controller lets you set custom trigger points to turn on a chiller or heater based on the temperature of the water in your tank. The easy to read display lets you view the current temperate, while the large buttons let you set the heating and cooling limits.   Temperature Probe

    $39.99

    …seconds.   Probe Holder/Hose Inputs Keep your probes and dosing tubings secure. Hold up to 4 probes in the skimmer section of the sump in the preinstalled probe holder. Each hole is countersunk to keep probes from falling through and one is enlarged to fit a Neptune temperature probe. Installing an…

    $464.99

    …and filter quality.  By using a dual TDS meter it will allow you to see your TDS readings in two places.  We will usually suggest putting one probe before the DI stage and one after the DI stage to show what your RO is producing for water quality and then how your DI is performing by removing…

    $29.99

    …DI resin.   The TRM-1 Triple Inline TDS Meter from HM Digital is one of the most essential reverse osmosis accessories. This tool uses electrode probes to monitor the TDS of your reverse osmosis system in three places and lets you know exactly how the system is performing.   BulkReefSupply.com…

    $44.99

    …previous temperature set point and calibration once power is restored.   Remote Temperature Probe Avoid false temperature readings with a Remote Temperature Probe. Remote quick disconnect temperature probe can be placed up to 5 Ft away from the heating element for a more accurate temperature

    Starting at:
    $99.99

    …Scale) Temperature Range: 0-55 °C; 32-130°F Resolution: 0-99: 0.1 µS/ppm/ 0.01mS/ppt; 100-999: 1 µS/ppm; 1000-9990: 10 µS/ppm. Temp. resolution is 0.1 °C/F Accuracy: +/- 2% EC to TDS Conversion Factor: Non-linear conversions for KCl, 442TM or NaCl solutions, selected by the user. Probe: Detachable…

    $76.95

    …and easy temperature changes without having to get your hands wet. As you change the temperature settings the bright red LED display will show you the desired temperature as it is changed, and after a few seconds the screen will change back to the temperature being read by the external probe. Finnex…

    Starting at:
    $29.99

    …tank's equipment looking perfect.   Monitor and Control Temperature pH Outlets 24VDC accessories WAV pumps Individual outlet power consumption   What's Included? 1x ApexEL Base Unit 1x EnergyBar 832 1x Temperature Probe 1x Double Junction pH Probe 1x 6ft AquaBus Cable 1x 7.0pH Calibration Solution…

    $499.95

    …device. The HI98129 can also read the temperature and all the readings are ATC (automatic temperature compensated) which means values will be more accurate. The pH electrode can be changed, meaning that you will not have to throw away the HI98129 after the probe has exhausted. Almost all pH sensing…

    $157.99

    …hole sizes.    Probe Holder/Hose Inputs Keep your probes and dosing tubings secure. Hold up to 4 probes in the skimmer section of the sump in the preinstalled probe holder. Each hole is countersunk to keep probes from falling through and one is enlarged to fit a Neptune temperature probe. Installing…

    $564.99

    …  Kit Includes: 1x ApexEL Base Unit 2x EnergyBar 832 1x Temperature Probe 1x Double Junction pH Probe 1x 6ft AquaBus Cable 1x 7.0pH Calibration Solution Packet 1x 10.0pH Calibration Solution Packet   The ApexEL has built-in WiFi, Temperature, pH, monitoring and much more!. Set reminders, log testing…

    $749.90

    …a cap, batteries, lanyard, and pH 7.0 buffer   Specifications: pH Range: 0 - 14 Temperature Range: 0-80 °C; 32-176 °F Resolution: 0.01 pH; Temperature resolution is 0.1 °C/F Accuracy: +/- 0.1 pH Temperature accuracy is +/-1% Calibration: Digital automatic calibration (one point) with digital…

    $79.99

    The Milwaukee MW101 pH Meter with battery is a low cost, high quality and reliable pH meter. The Milwaukee MW101 pH Meter ships complete with a pH probe, calibration solution, a 9V battery, instruction manual and a screwdriver for easy calibration. Milwaukee Instruments offers the most affordable pH…

    $96.99

    …than 10 dollars to replace. When it comes to probes, you get what you pay for, and Neptune has sourced one of the best lab grade dissolved oxygen probes available today. The PM3 module also has a bonus that it comes with an open port for a temperature probe and also another opening for an I/O switch…

    $94.95

    …keep your probes exactly where you want them in your sump, while only taking up a minimal amount of space.   CustomCradle XL: Holds up to 4 probes, 4 dosing tubes and 1 top off tube (up to 1/2 inch) Compatible with all temp, pH, conductivity and ORP probes including Neptune Apex Temperature Probe

    $34.99

    …mounted probe holder will keep your probes exactly where you want them in your sump, while only taking up a minimal amount of space.   CustomCradle Nano: Holds up to 3 probes and 2 dosing tubes Compatible with all temp, pH, conductivity and ORP probes including Neptune Apex Temperature Probe

    $29.99