Water Pump Rodi

SORT:
VIEW: 32/64
119 items found. Showing items 1 to 32 .

    Add the Aquatec 8800 Booster pump to your reverse osmosis unit if you have low water pressure in your house or want to get better performance out of your system. This booster pumps requires a transformer which is sold separately. If your RO system has an auto shut off kit or you are planning on…

    $99.99

    Polyethylene Tubing for Reverse Osmosis Systems Compatible with all Bulk Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings.    Six Sizes Available: Each…

    Starting at:
    $1.99

    pump with the Smart Solenoid will easily take under 1 minute. Simply disconnect your current pump from the controller and plug in the solenoid. It is that easy.   The solenoid works in conjunction with the ATO controller and sensor to allow the flow of RODI water to your sump and when the water

    $22.99

    …booster pump is simple and only takes a couple of minutes.   Compatible with: 150 GPD Water Saver Upgrade - All BRS 75 GPD RO/DI Systems 200 GPD Water Saver Upgrade - All BRS 100 GPD RO/DI Systems   Recommended Conditions: Minimum Water Pressure - 65 PSI Max Water Pressure - 90 PSI Recommended Water

    Starting at:
    $59.99

    …booster pumps can easily increase the pressure going into your RO or RO/DI system if your starting pressure is low. Reverse osmosis is a pressure-driven process. Small residential RO units will theoretically operate below 50psi, but the reality is you won't get a lot of water and the product water

    $129.99

    …of brine water usually lost to the drain (i.e. no electricity required), the Permeate Pump forces product water into the storage tank, reducing membrane back pressure and maximizing available feed pressure.   These pumps dramatically improve the efficiency of drinking water R.O. water production,…

    $59.99

    Add the Aquatec 8800 Booster pump to your reverse osmosis unit if you have low water pressure in your house or want to get better performance out of your system. The 3/8” fittings provide less back pressure if you require long runs of tubing. This booster pumps requires a transformer which is sold…

    $109.99

    …aquarium peristaltic pump from EcoTech Marine. Much more than a traditional “dosing” pump, the Versa is extremely precise, robust, and versatile.   The Versa excels in many precision aquarium pump applications, including; dosing, auto top off (ATO), automated water changes, and reactor feeding.…

    $149.99

    …this? If you hook up your RODI system and have low pressure or an issue with the amount of product water you are producing, there is a good chance are a booster pump will solve the issue.  The Booster pump kit will come with everything needed to get it hooked up to your RODI system and increases the…

    $149.99

    …tank used for drinking water), these pumps dramatically improve the efficiency of R.O. water production, reducing wastewater by up to 80%. In other words, if your current system requires 10 gallons of tap water to produce a gallon of pure water (10:1), adding a Permeate Pump could reduce this ratio…

    $63.99

    …for this pump. And unlike many wimpy pumps out there, the PMUP has enough pressure to push water up 14 feet vertically, it can even move the water up from one floor below. This means you could put your RO water storage in your basement or downstairs in a utility room and it could still pump it up to…

    $39.95

    …Versa Peristaltic pumps, EcoTech Marine is setting a new standard in peristaltic pumps. The 4 pack with base station offers incredible capability and value.    The Versa excels in many precision aquarium pump applications, including dosing, auto top off (ATO), automated water changes, and reactor…

    $599.99

    …for this pump. And unlike many wimpy pumps out there, the PMUP has enough pressure to push water up 14 feet vertically, it can even move the water up from one floor below. This means you could put your RO water storage in your basement or downstairs in a utility room and it could still pump it up to…

    $49.95

    …RO Tubing Water pressure can be increased by adding a booster pump before your RO/DI system. Low pressure may cause the RODI system to produce excessive waste water. Pressure over 90 PSI may cause damage to the RO/DI units filters and components.   Need Replacement Filters? 4 Stage RO/DI Replacement…

    Starting at:
    $149.99

    …6" x 5.5" x 14" 6" x 5.5" x 14" Recommended Minimum Water Pressure  50-80 psi 50-80 psi 65-80 psi 65-80 psi Tubing Size 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing Water pressure can be increased by adding a booster pump before your RO/DI system. Low pressure may cause the RODI sys

    Starting at:
    $199.99

    Replace the pump on your IceCap ATO with a Solenoid Valve Compatible with the IceCap ATO system. IceCap's ATO Solenoid Valve can work with a gravity fed auto top off reservoirs or just connect it directly to your RODI system. The solenoid valve will replace the pump that comes with the IceCap ATO…

    $23.00 $18.40

    …rinse any equipment with RODI water to remove excess citric acid solution before placing it back into your aquarium. The unused solution can be stored indefinitely.    1-Gallon Mixing & Cleaning Instructions Add 3/4 cup (6 oz) of BRS Citric Acid to 1 gallon of RODI water and mix until the citric…

    Starting at:
    $12.49

    Water Saver systems. Kit includes an 800ml/min Auto Flush Flow Restrictor. Requires working Auto Shut Off Valve to operate.   Installation Instructions: 1. Turn off your source water supply.  2. Locate and replace the current flow restrictor with the new Auto Flush Flow Restrictor. On all BRS RODI

    Starting at:
    $104.99

    water flowing through it is unfiltered. On most reverse osmosis systems the red tubing will run from the source water connection through pre-filters and up to the source water input on the membrane. After the membrane the color of the tubing will usually change to blue to designate product water,

    $99.99

    …Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings.    Blue RO Tubing is commonly used to distinguish filtered water from raw source water. On most…

    $99.99

    …may sometimes.  With a simple ball valve you can also shut the feed of water off to the RODI system while keeping water flowing up to your sink.   John Guest Angle Stop Valve's directly connect RO units to the household water supply. It installs under the sink, inline after the shut-off valve. This…

    Starting at:
    $10.49

    …to help fine tune your water chemistry.  Dosing in smaller tanks can be done by diluting each bottle with RO/DI water but we do recommend using the standard Base Elements Additives since they are diluted and easier to distribute to smaller aquariums.   Use with Dosing Pumps It is highly recommended…

    $52.00

    …Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings.    Blue RO Tubing is commonly used to distinguish filtered water from raw source water. On most…

    Starting at:
    $1.99

    Polyethylene Tubing for Reverse Osmosis Systems Compatible with all Bulk Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings.    Black Tubing is commonly…

    Starting at:
    $1.99

    …Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings.    Red RO Tubing is used on most reverse osmosis systems to designate that the water flowing through…

    Starting at:
    $1.99

    Bulk RO Tubing Compatible with all Bulk Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings.   Our 500 Foot Spool comes as a complete continuous 500-Foot…

    $99.99

    …your RODI systems flow rate. 300 mL/min 400 mL/min 500 mL/min for 75 GPD single membranes or 150 GPD Water Saver Systems 600 mL/min 700 mL/min 800 mL/min for 100 & 150 GPD single membranes or 200 GPD Water Saver Systems   The Aquatec Auto-Flush Flow Restrictor features: Reduction in waste water

    Starting at:
    $54.99

    …excess carbon dioxide is the likely culprit. You have two choices: Collect the water coming from your RO system in a large container, add a power head or air stone and allow the CO2 to gas off. Then pump the water through your DI resin.   What's Included? 1x 2.5" x 10" Cartridge Pre-Packed with…

    $23.99

    Polyethylene Tubing for Reverse Osmosis Systems Compatible with all Bulk Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings.    Natural Clear coloration…

    Starting at:
    $2.99

    …3A - Add 0.5 Liters of RODI water to a 1L dosing container. Add the contents of 3A and top off the container with RODI water. Solution 3B - Add 0.5 Liters of RODI water to a 1L dosing container. Add the contents of 3B and top off the container with RODI water.   Dosing Core7 Reef Supplements…

    Starting at:
    $52.00

    …3A - Add 0.5 Liters of RODI water to a 1L dosing container. Add the contents of 3A and top off the container with RODI water. Solution 3B - Add 0.5 Liters of RODI water to a 1L dosing container. Add the contents of 3B and top off the container with RODI water.   Dosing Core7 Reef Supplements…

    $219.00

    …off water Step 3. With RODI water fill your top off reservoir & mix in the proper amount of kalkwasser then allow the solution to settle for 30 minutes before using. DO NOT OVERMIX: Excess mixing and air contact will decrease the potency of kalkwasser. Step 4. Place your ATO systems pump or intake…

    $38.99